NIT No:19/ CMCC/EEC-IV/CE/NRANVP/2026-27, Nava Raipur Atal Nagar, -Dist. Raipur ,Dated:29.05 2026

Customer Billing Address

Customer Delivery Address

Sales Person Name

Sales Person Contact

Sales Person Branch

Sales Person Branch Address

Sales Person Branch GSTN No

Quotation Number

Product Description

Product Features

Product tender Specification

Basic Price Per Qty

GST Price and Percent

Unit Price + GST Price

Terms and Conditions

Delivery Period

Order Placement

Warranty Period

Reference Specifications

Note: The images, specifications and code provided are for reference only, meaning they may not represent the final product and are subject to change

SR.NO REF. IMAGE MODEL NAME & DESCRIPTION Storage

3 Seater W 211 X D 94 X H 91 CM 2 Seater W 155 X D 94 X H 91 CM Light Grey

Premium Executive Main Table

Supplying and placing in position Main Table of the following specifications 3000 x 1050 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping. LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel. DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thicknessedges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface. Drawer unit is provided with soft closing channels for smooth opening and closing.Drawer unit is secured with side central lock. OPEN STORAGE UNIT:Top panel and open storage unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. Allthickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade andapproved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.Also lock is provided on side panel for security. ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections. HIDDEN WIRELESS MOBILE CHARGER:It will only be available in 3000mm main table. It is fitted below leather pad. Supplying and placing in position ERU of the following specifications 1200 x 450 x 610 TOP PANEL:Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick venee rlipping. UNDERSTRUCTURE:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. DOOR PANELS:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.It is secured with side central lock.

3 Back Unit Body

Back Unit Shutter

Supplying and placing in position Back Unit of the following specifications 2400 x 470 x 1226 CONSTRUCTION AND MATERIAL:Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA).Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron). VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock. GLASS DOOR:Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with EpoxyPolyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security.

2400 x 470 x 2325 CONSTRUCTION AND MATERIAL:Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottompanel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA),Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit. Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron). VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock. GLASS DOOR:Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with EpoxyPolyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security.

3 Back Unit Body 2400x600x 610

Supplying and placing in position Back Unit of the following specifications 2400 x 600x 610HCONSTRUCTION AND MATERIAL:Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA).Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns(+/-10 micron). VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for ease of opening. Storage issecured with 3 way cam lock. GLASS DOOR:Made from the combination of aluminium alloy (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder coated with EpoxyPolyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security.

4 Premium Executive Highback Chair

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustment · Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner. The adjustable tilting mechanism is designed with the following features: 360° revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: THe Seat and Backupholsttery to be made with leather/leatheretteBack Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 - 132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM.

Premium Executive Visitor Chair

5 SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *Mid BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustment · Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner. The adjustable tilting mechanism is designed with the following features: 360° revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: THe Seat and Backupholsttery to be made with leather/leatheretteBack Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 - 132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM.

Providing, supplying and placing of Coffee Table Dimensions W x H x D (cm) Overall Size : Width : 119.9cm Depth : 59.9cm Height : 45cm Primary Material - Plywood Finish Color - Walnut Maximum Load Capacity (kg) - 50 Wheels Included - No

6 Size (Big) : W112 x D112 x H36 cm Color : Frame Rose Wood, Glass : Brown

8 Premium P 3str sofa Plthr Blak

3 Seater W 211 X D 94 X H 91 CM 2 Seater W 155 X D 94 X H 91 CM Light Grey

9 Conference Table (33 Seater)

Supplying and placing in position conference table of the following specifications

Work Surface-Made of 36mm thick MDFone side prelaminate board conforming to IS14587:1998

with 0.4mm PVC membrane pressed on to top and having chamfered edge.

Full length access panel is provided with soft closing hinges inline with worktop edge

Worktop is available in various shapes.

Understructure-The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together.

Modesty-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Wire Management-An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. AV Details-The table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150° head module and 165° head module. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal MicroAV Detailsphone wires running from table top to wire tray.

10 MAIN TABLES with ERU attached Pedestal

TBL 2350 LH RU 1200 PDL

Dimensions: 2400 × 2000 × 750 mm 1. Guide Power Supply – Built-in power system for seamless device connectivity. 2. Countertop Aluminium Wrapping – Enhances durability, aesthetics, and wear resistance. 3. Blister Process – Provides a smooth, scratch-resistant, and durable surface finish. 4. LED Light Strip – Ambient lighting enhances workspace visibility and aesthetics. 5. One-Piece Moulding Board – Seamless construction ensures stability and longevity. 6. Blister Diamond Craft Board – Premium textured finish for a refined appearance. 7. Aluminium Alloy Edge Processing – Rounded edges for safety and durability. 8. Mobile Power Track & Grid Baffle – Organized cable management with integrated LED lighting. 9. Ventilated Secondary Cabinet – Efficient heat dissipation for electronics and storage. 10. Password Lock – Secure storage for confidential documents and valuables. 11. Movable Rail Power Supply – Adjustable power access for flexible office use. 12. Arc-Shaped Aluminium Strip Edging – Strong, impact-resistant, and elegant finish. 13. Desk Surface Leather Pad – Provides comfort and a premium work experience.

10 Backunit 2350x500x750

1. Guide Power Supply – Built-in power system for seamless device connectivity. 2. Countertop Aluminium Wrapping – Enhances durability, aesthetics, and wear resistance. 3. Blister Process – Provides a smooth, scratch-resistant, and durable surface finish. 4. LED Light Strip – Ambient lighting enhances workspace visibility and aesthetics. 5. One-Piece Moulding Board – Seamless construction ensures stability and longevity. 6. Blister Diamond Craft Board – Premium textured finish for a refined appearance. 7. Aluminium Alloy Edge Processing – Rounded edges for safety and durability. 8. Mobile Power Track & Grid Baffle – Organized cable management with integrated LED lighting. 9. Ventilated Secondary Cabinet – Efficient heat dissipation for electronics and storage. 10. Password Lock – Secure storage for confidential documents and valuables. 11. Movable Rail Power Supply – Adjustable power access for flexible office use. 12. Arc-Shaped Aluminium Strip Edging – Strong, impact-resistant, and elegant finish. 13. Desk Surface Leather Pad – Provides comfort and a premium work experience.

11 SOFA 3 Seater

Providing, supplying and placing of Sofa SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

6 Coffee Table Size (Big) : W112 x D112 x H36 cm Color : Frame Rose Wood, Glass : Brown

14 COMPACTOR PLUS-DRIVE TYPE

Optz Plus TD2 Solid back panel

CHANNELS (RAILS)

Optz Plus Push Pull / D2 CHNL 2400mm

Optz Plus Push Pull / D2 CHNL 1600mm

Optz Plus Push Pull / D2 CHNL 800mm

Providing, suplying and placing of storage Unit Overall Dimensions of SD 2 Single Drive Cover Unit 2 Bay(U/C + Fittings + Cover) shall be 2400mm(W) x 400mm(D) x 2113mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513, Gr.D. Each body shall have 1 main unit plus add on units (0,1,2,3 depending on no. of bays 1, 2, 3, 4 respectively) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be with 12 bend panel made from CRCA steel 0.7 mm thick IS:513, Gr.D .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Hand Wheel and Sprocket-Chain arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall be provided with 3 driving rollers and 3 driven rollers.LD understructure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U-channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through Lock which is operated by spring mechanism mounted onto understructure of last drive unit. The lock is made of 0.8 mm thick conforming to IS:513..The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last Body is Twin Drive, i.e., TD, hinged doors are provided for the last body. In this scenario the centralized locking system is fitted on the last TD body. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 10 for SD2. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.

Overall Dimensions of LD 2 Single Drive Cover Unit 2 Bay(U/C + Fittings + Cover) shall be 2400mm(W) x 400mm(D) x 2113mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513, Gr.D. Each body shall have 1 main unit plus add on units (0,1,2,3 depending on no. of bays 1, 2, 3, 4 respectively) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be with 12 bend panel made from CRCA steel 0.7 mm thick IS:513, Gr.D .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Hand Wheel and Sprocket-Chain arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall be provided with 3 driving rollers and 3 driven rollers.LD understructure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U-channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through Lock which is operated by spring mechanism mounted onto understructure of last drive unit. The lock is made of 0.8 mm thick conforming to IS:513..The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Last unit (LD) have the Drive Unit Cover. When the last Body is Twin Drive, i.e., TD, hinged doors are provided for the last body. In this scenario the centralized locking system is fitted on the last TD body. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 10 for LD2. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.

Overall Dimensions of TD 2 Single Drive Cover Unit 2 Bay(U/C + Fittings + Cover) shall be 2400mm(W) x 800mm(D) x 2113mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513, Gr.D. Each body shall have 1 main unit plus add on units (0,1,2,3 depending on no. of bays 1, 2, 3, 4 respectively) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be with 12 bend panel made from CRCA steel 0.7 mm thick IS:513, Gr.D .Uniformly distributed load capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3 & D4 movement of units is achieved mechanically through a PU Hand Wheel and Sprocket-Chain arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall be provided with 3 driving rollers and 3 driven rollers.LD understructure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U-channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-molding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through Lock which is operated by spring mechanism mounted onto understructure of last drive unit. The lock is made of 0.8 mm thick conforming to IS:513..The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. When the last Body is Twin Drive, i.e., TD, hinged doors are provided for the last body. In this scenario the centralized locking system is fitted on the last TD body. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 20 for TD2. Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. CRCA Steel conforming to IS: 513 Gr.D. This assembly is available for both heights – 1980H and 2361H.

It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug & screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and 2400mm.

15 MAIN TABLES with ERU attached Pedestal

TBL 2400 LH RU 1200 PDL

1. E1 grade particle board with melamine finish. 2. Fixed side return can be left or right when first assembly, including swing door, drawers and open space for CPU. 3. Corner with golden aluminum parts. 4. Modesty panel with aluminum and hard PU decorations. 5. Bevel edges 50mm table top with aluminum wire entrance box. Overall size: 2400W*1850D*750H Main table top: 2000W*900D Side return: 1800W*600D

16 Backunit 2350x500x750

1. E1 grade particle board with melamine finish. 2. Fixed side return can be left or right when first assembly, including swing door, drawers and open space for CPU. 3. Corner with golden aluminum parts. 4. Modesty panel with aluminum and hard PU decorations. 5. Bevel edges 50mm table top with aluminum wire entrance box. Side return: 1800W*600D

17 SOFA3 Seater

Leatherrette / Fabric/ Wooden Frame & metal Legs Size - 1930 x 880x840 in mm

18 Large coffee table

Providing, supplying and placing of Coffee Table Dimensions W x H x D (cm) 120 x 45 x 60 Material : 18 mm thk prelaminated particle board Shade : Remini Walnut Construction : Knock down Finish : 1) MIP lamination in Remini Walnut shade with matching lipping in Matt finish 2) MIP lamination in Cloud Grey shade with matching lipping in Matt finish

Providing, supplying and placing of Side Table Dimensions W x H x D (cm) 45 x 45 x 45 Material : 18 mm thk prelaminated particle board Shade : Remini Walnut Construction : Knock down Finish : 1) MIP lamination in Remini Walnut shade with matching lipping in Matt finish 2) MIP lamination in Cloud Grey shade with matching lipping in Matt finish

Providing and placing "desk based modular workstation with System ht - 750 mm. LEGS: Providing metal powder coated cello leg. Dual color can be offered with Cello leg. Legs are for standard workstation height of 750mm.UNDERSTRUCTURE: Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.WIRE MANAGEMENT: For 750 high - Standalone power box with wire riser have been considered. Access flap will be provided. Switch plate of (8+3 Anchor Roma) module is considered for Power and Data points. MODESTY : Metal modesty: Lazer cut perforated Metal modesty Metal and wooden modesty are mounted on the worktop with the help of the modesty mounting brackets Modesty terminates at 200 mm from ground. WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 2100 mm w x 900 mm d for Main table, 900 mm w x 450 mm x 740h d for Return unit. Combi Storage :900WX450DX750HBody : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment.HDU has a three point lock All the storages are fitted with a 6 mm leveler at bottom for leveling

21 Modular Workstaiton 1500x1500x600

Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges End Legs: MS powder coated legs, pin up board Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management MS Flipdown cable tray with 450mm Aluminium Flip Up Specifications : MS Powder Coated Horizontal raceway (Cable tray) with separator clips for power and data, Switch plate to mount the switches / sockets as per requirement. Vertical wire entry cover with removable metal cover between the intermediate legs for wire uptake to MS Cable Tray from floor and 450mm Aluminium Flip Up for switch access.

Providing, supplying and placing of HDU Wooden storage range comprises of a range of Low height to medium height wooden HDU 900Wx450Dx1050H Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock All the storages are fitted with a 6 mm leveler at bottom for leveling

23 Sofa 3str sofa SLthr Cru Br

Providing, supplying and placing of Sofa Dimensions W x H x D (cm) - 175 x 83.5 x 80 Upholstery•Material : Syn Leather •Shade: Crush Brown •Thickness: 1 mm Frame :•Material : Pine Wood •Moisture content : 1012 % •Thickness of Plywood used : 12 mm & 18 mmSeat Foam : •Material : Slab stock •Density : 32 kg/m3 at seat Back Foam : •Material : Slab stock •Density : 28 kg/m3 at seat Webbing : •Material : Nylon Legs :•Material : PVC

24 Highback Chairs for Special Secretary, Principal Secretary Secretary Good Governance(EXECUTIVE CHAIR)

Modern Ergonomic Design Executive Office Chair 1.Product name: FK005 2.Leather Seat and Back 3.Arm rest – Leather 4.Synchronized mechanism 4 positions locked with 4 position locked 5.Polish aluminium base & PU wheels 6.Dimension:670(W)x690(D)x1215(H) in mm 7.CBM:0.55

25 Visitors Chairs for Special Secretary, Principal Secretary Secretary Good Governance

Modern Ergonomic Design Executive Office Chair 2.Leather Seat and Back 3.Arm rest – Leather 4.Synchronized mechanism 4 positions locked with 4 position locked 5.Polish aluminium base & PU wheels 6.Dimension:670(W)x690(D)x1215(H) in mm 7.CBM:0.55

27 Highback Chairs for Delouty Secretary, Joint Secretary and Cabin

CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM.

41 VISITOR CHAIR 6 MATERIAL - Leather/PU/cashmere; High density pure foam; Aluminum armrest & Aluminum base; PU wheels Colour – Black and Grey

Conference Highback Chairs

28 MATERIAL-Leather/PU/cashmere; High density pure foam; Aluminum armrest & Aluminum base; PU wheels

Conference Midback Chairs

29 SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area. The chair seat & back size are HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 113.5-123.5 CM. SEAT HEIGHT (SH): 46.0-56.0 CM.

Workstation Charis

30 SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features: · 360° revolving type. · 3 position locking with anti shock mechanism. · Tilt tension adjustment HEADREST: The Headrest sub-assembly is made up of injection moulded glass filledPolypropylene which is upholstered with moulded HR polyurethane foam and fabric. Ithas an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. WIDTH (W): 76.1 CM. DEPTH (D): 76.1 CM. HEIGHT (H): 117.0 - 130.0 CM. SEAT HEIGHT (SH): 44.5 - 54.0 CM. This product should be certified by GreenGuard Gold,BIFMA Level 2,IAQ Gold & GreenPro.

Almirah 1950Hx900Wx450D

31 Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).

11 32 1 HORIZON CONFERENCE MEETING TABLEConference Table - Specifications 1. Dimensions: Approx. 3600 × 1200 × 750 mm 2. Material: High-quality engineered wood with a PU-coated finish 3. Design Features: Aluminium alloy edge processing for safety and aesthetics, One-piece moulded structure for stability, Integrated power supply and cable management system, Mobile power track for easy connectivity 4. Lighting: LED light strip embedded in the front panel for an elegant and modern look 5. Base: Sturdy metal or engineered wood base with a decorative perforated baffle, Ventilated design to aid in heat dissipation

33 Providing and fixing custom-designed TV unit Description: - Supply and installation of TV unit / entertainment console as per approved design and drawings. - Framework shall consist of plywood / MDF board / particle board of specified thickness (typically 18 mm), fixed with screws and adhesive. - External surfaces shall be finished with laminate / veneer / PU polish / paint as specified. - Back panel for TV mounting shall be provided with cable management cut-outs and concealed wiring provision. - Shelves, drawers, and cabinets shall be included as per design, with soft-close hinges, channels, and handles of approved make. - Provision for LED strip lighting / decorative panels / glass shutters shall be made where specified. - All exposed edges shall be finished with edge banding / beading for durability and aesthetics. - Rate shall include materials, hardware, polishing/painting, transportation, and installation complete in all respects.