Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 CrAccepted-Finance CABIN NO 1 1ST FLOOR SHOP NO 8 9 RAILLY SECTOR 12 A PANCHKULA | PANCHKULA | HARYANA | 133301 | ₹2.8 Cr | L1 | Accepted-Finance Lowest |
| 2 | L2₹2.9 CrRejected-Finance | ₹2.9 Cr | L2 | Rejected-Finance Rates quoted on higher side |
| 3 | L3₹3.1 CrRejected-Finance 3077 SECTOR 28 D CHANDIGARH | ₹3.1 Cr | L3 | Rejected-Finance Rates quoted on higher side |
| 4 | L4₹3.2 CrRejected-Finance 2030 A BLOCK NO 22 SECTOR 63 CHANDIGARH | NA | NA | 160001 | ₹3.2 Cr | L4 | Rejected-Finance Rates quoted on higher side |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not fulfilled the eligibility criteria |
Updated dates
Tender Value
₹3.8 Cr
EMD Value
₹7.7 L
Closing Date
13 May 2026, 11:30 amClosed
Er Naveen Khatri
Executive Engineer CP Division No2 Road Sector 9 Chandigarh
Recarpeting of Main Road Junctions 34 to 31 Dakshin Marg Chandigarh
2026_CHD_92113_1
CP2Road2774059
Open Tender
Civil Works - Roads
90 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7.7 L
20 May 2026
4 May 2026
13 May 2026
4 May 2026
13 May 2026
4 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and laying tack coat with bitumen VG-10 @ 3.00 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H specification and to the entire satisfaction of the Engineer-in-charge. | 82,817.95 | Sqm | 24.6 | ₹20,37,321.57 | NSR |
| 2 | Providing and laying 30 mm thick bituminous concrete as per clause 507 of MORT&H specification with mechanical paver/manually after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum5.65% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500-17 gradation –II of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge. | 770.2 | Cum | 12,691.8 | ₹97,75,224.36 | NSR1 |
| 3 | Providing and laying 35 mm thick bituminous concrete as per clause 507 of MORT&H specification with mechanical paver/manually after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum 5.65% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500-17 gradation –II of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge. | 1,454.93 | Cum | 12,691.8 | ₹1,84,65,680.57 | NSR2 |
| 4 | Providing and laying type 3 (6mm to 8mm)7 mm Avg. Thick SLURRY SEAL with mechanical paver/manually after mixing aggregate and bitumen as per design mix in hot mix plant using 7.5% Straight run bitumen of VG-30 penetration and using fine aggregate with 2% filler to the weight of aggregate confirming to relevant specification laid in MORT&H specification and density of slurry seal concrete as laid 1.71 Gm/c.c.complete in all respect and to the entire satisfaction of the Engineer-in-charge. | 15,575.16 | Sqm | 81.4 | ₹12,67,818.02 | NSR2 |
| 5 | Providing and applying 2.5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, arrows and other road signs etc. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete in all respects and to the entire satisfaction of Engineer-in-charge. | 932.26 | Sqm | 377 | ₹3,51,462.02 | NSR2 |
| 6 | Dismantling of existing Kerbs and stacking the serviceable kerbs properly at site and disposal of the unserviceable kerbs and channels average lead of 1000 mtr. | 20,194 | Rmt | 12.6 | ₹2,54,444.4 | NSR2 |
| 7 | Dismantling of existing Channels and stacking the serviceable channels properly at site and disposal of the unserviceable kerbs and channels average lead of 1000 mtr. | 10,097 | Rmt | 18.9 | ₹1,90,833.3 | NSR2 |
| 8 | Providing and fixing of factory manufactured precast concrete kerb of size 300mm x 300mm having 150mm thickness with one edge semi rounded duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge. | 11,642.56 | Rmt | 319.15 | ₹37,15,723.02 | NSR2 |
| 9 | Supplying and filling in plinth with sand under floors on existing channels including watering, ramming, consolidating and dressing complete. DSR 2.27 | 16.41 | Cum | 2,066.41 | ₹33,909.79 | NSR2 |
| 10 | Providing and fixing of factory manufactured precast concrete channel of size 300mm x 300mm having 75mm thickness duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge. | 5,821.28 | Rmt | 211.25 | ₹12,29,745.4 | NSR2 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.34 MB
Tendernotice_2.pdf
PDF • 2.55 MB
BOQ_112709.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid