The work of Widening and strengthening of Delhi-Yamnautri road (National Highway No. 709B) to Titro Jalalabad (other district road) road In the financial year 2024-25 in Saharanpur district.

Amount

Excavation for road way in soil by mechanical means including cutting and transporting the earth to site of embankment/dumping area with lead upto 1000 metres, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. as per MoRTH specification clause No. 301 complete excluding GST.

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). complete excluding GST. SI. No. 692

Mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc complete excluding GST.(SI No 260)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 as per MoRTH specification clause No. 305 complete excluding GST.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 complete excluding GST.

Providing laying spereading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MoRTH specification clause No. 406 complete excluding GST.

Providing & applying Primer coat with bitumen emulsion (SS-1 Type) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/Sqm. Using mechanical means. complete excluding GST.

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.25 kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mecha-nical broom. as per MoRTH specification clause No. 503 complete excluding GST.

Providing and laying dense graded bituminous macadam (Grading 2) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505(b) complete in all respects but excluding GST.

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.20 kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mecha-nical broom. as per MoRTH specification clause No. 503 complete excluding GST.

Providing & laying Bituminious Concrete (Grading 2) with100-120TPH batch type hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder @ 5.4 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 507 (b) Complete in all respects inculding all material. complete excluding GST.

Cement Concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work complete in all respects but excluding GST. (SI. No. 279b).

Plain/Reinforced Cement Concrete (M-25) in sub structure complete as per Drawing and Technical Specifications. Ref. to MoRTH Spec.1500, 1700 & 2100 complete in all respects but excluding GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. As per Ref. to MORTH Spec. 1600 but excluding GST

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification as per drawing, Technical and MoRTH specification clause No. 2503 but excluding GST

Providing and laying Filter material Graded stone aggregate of required size underneath pitching in slopes complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing, Technical and MoRTH specification clause No. 2504 but excluding GST

(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. S.I. No.255 but excluding GST

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. S.I. No. 763 but excluding GST

(B) M-150 Brick Work in 1:3 (One cement & Three Corse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 307 )

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. required for proper complete in all respects but excluding GST. (SI. No. 574 )

12 mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:3. including supply of all materials, labour, tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 282 )

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. required for proper complete in all respects but excluding GST. (SI. No. 279 a )

Construction of of NP-3 class 450 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Construction of of NP-3 class 600 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Construction of of NP-3 class 900 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Construction of of NP-3 class 1000 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc. Ordinary kilometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

Reinforced cement concrete M15 grade Hectometre stone of standard design as per IRC:8, fixing in position including painting and printing etc.Hectometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

ANIL KUMAR CONTRACTOR (BID ID -4887215)

M/S USHA CONTRACTORS AND CONSTRUCTIONS (BID ID -4890873)

amit kumar contractor (BID ID -4885921)

SINEWY CONSTRUCTIONS PVT. LTD. (BID ID -4886843)

SHREE TIRUPATI CONSTRUCTION (BID ID -4900228)

RAJ BUILDERS (BID ID -4890234)

M/S CHAUDHARY ASSOCIATES (BID ID -4891526)