Loading
Loading…
Loading…
Tender Value
₹8.4 L
EMD Value
₹8,400
Closing Date
15 Jun 2026, 12:00 pm
SUPERINTENDING ENGINEER
SE, EDC-1, MEERUT
ETNo-20/EDC-1/MT/2026-27
2026_PVVNL_1157290_1
ETNo.20/EDC-1/MT/2026-27
Open Tender
Electrical Works
180 days
UNDER EDD-KITHORE MEERUT
ETNo-20/EDC-1/MT/2026-27
2 documents required · 2 mandatory
₹1,180
SUPERINTENDING ENGINEER
₹8,400
5 Jun 2026
5 Jun 2026
15 Jun 2026
5 Jun 2026
15 Jun 2026
5 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance Work of Protection of STP/PCC Poles with Plastic sheet, Barricading of T/F (250 to 630 KVA T/F), during kanwar Marg in the area EDSD-I/II/III, under EDD-Kithore, Meerut. | |||||
| 1.01 | Wrapping of STP/PCC pole with PVC insulation sheet (minimum 50 micron), minimum till 7 feet height or as per direction of Supervising Enginner. Colour of insulation sheet will be confirmed by department. Work also includes wrapping of 02 rounds of 2 inch. width retroreflective tape. Along with supply & fixing of A-4 size danger signage stickers (danger signage stickers design will be provided Supervising Enginner.) & providing GPS Photos. | 1,400 | Job | - | - |
| 1.02 | Providing and fixing of flexi signage board of size 2 feet X 2 feet. Signage board must be properly binded by frame at edges (flexi signage board language will be provided by supervising enginner.) | 20 | Job | - | - |
| 1.03 | Strong barricading of distribution T/F with wooden balli (as per direction of Supervising Enginner). Wooden balli must be digged in atleast 2 feet inside the earth. Barricading must have horizontal bracing of wooden balli atleast 04 Nos on each side and providing diagonal bracing in-cross on each side. Along with supply & fixing of A-4 size danger signage stickers on each side.(Danger signage stickers design will be provided by supervising enginner.) & providing GPS Photos. | 40 | Job | - | - |
| 2Carriage of following material from store center PVVNL to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 Km. as per direction of Supervising Engineer. | |||||
| 2.01 | Line material such as HT/LT Cross Arms, HT/LT pin insulator, HT/LT pin, HT/LT disc insulator with fitting, stay rod, stay wire, LT AB cable, conductor, GI wire, Earthing, J Hook, GI wire for guarding, MS Nuts & bolts, suspension clamp etc. | 5 | Qtl | - | - |
| 3 | Earthing of each HT/LT line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. (as per UPPCL Respo). | 250 | Nos | - | - |
| 4 | Guarding of line with G.I. wire having 2 no. horizontal wire & 3 Mtr distance odf laces of ten 6 SWG/8 SWG G.I. wire complete work in all respect (as per UPPCL Respo). | 150 | Span | - | - |
| 5 | Open the binding & resagging of existing HT/LT line. | 100 | Span | - | - |
| 6 | Straighting Tilted pole & resagging of conductor/cable after opening the binding and making properly (as per UPPCL Respo). | 70 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
BOQ_2168544.xls
BOQ • 0.28 MB
TENDERFORM20.pdf
Tender Documents • 0.20 MB
Download all tender documents and submit your bid