Increasing capacity from 1x10plus1x5 MVA to 2x10 MVA at 33/11 kv Substation SECT D1 SHAKTI CHAURAHA and to reduce the overloading of Indralok substation, proposed connecting some load of 11 kv Hind Nagar feeder to 33/11 kv Substation Shakti Chauraha

Amount

Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas.

11 KV VCB, Outgoing CTR 200/100/5 A, 350 MVA

LT XLPE Cable 1X630 Sqmm

11 KV 3x300 Sqmm Cable Jointing Kit O/D

11 KV 3x300 Sqmm Cable Jointing Kit I/D

11 KV 3x185 Sqmm XLPE cable

11 KV 3x185 Cable Jointing Kit I/D

11 KV 3x185 Cable Jointing Kit O/D

11 KV 3x185 sqmm Straight Through C/J Kit

ST pole 11 mtr long

M.S.channel 100x50 sq mm

M.S.Angle 65x65x6 sq mm

11 KV pin insulator

11 kv pin with nut

M S Earthing Rod 20x2500 mm

1x240 LT XLPE Cable

11 KV Disc Insulator T&C Type 4500 KN

Disc Fittings T&C Type

M.S. Angle Iron 65x65x6mm Bracing. 2 no. 4300 mm

Top chanel 100X50MM

Stay Set 16x1800 Complete

Stay Wire 7/10 SWG

Dismantling of 33/11 KV 5 MVA power transformer by opening of jumpers of HV side, LV side 11 kV cable of 5 MVA T/F and earthing strip of T/F neutral bracket & 11 KV cable stand.

Removal of existing 11 KV Side Cable Stand

Safe dragging of 5 MVA T/F from plinth to a safe place in/out the switch yard

Safe dragging of 10 MVA T/F & its accessories from outside the switch yard to plinth.

Erection and commissioning of 10 MVA T/F mounting of radiator, conservator tank and filling of T/F oil and complete wiring and commissioning of T/F.

Connecting 10 MVA Power Transformer to 33 KV & 11 KV line & jumpering by 1x630 Sqmm. cable including with fixing of connector & Al. lugs (Required connectors, PG clamps & Al. lugs will be provided by contractor).

Repairing and regrouting of 11 KV cable stand and other associated work.

Minor Repairing of existing Power Transformor Plinth after commissioning of 10 MVA T/F

Hoisting of 11 KV 3x300 sq mm XLPE Cable on cable stand

Pipe boring type Earthing min 20 mtr deep from ground lavel or upto water lavel with ‘B’ class G.I. Pipe 2“ dia connection of equipments with earthing included in the job as per norms for Transformer /other requried equipments.

Draging of 11 KV outgoing pannel from unloading place up to control room & placement, Erection, Grouting Commisning & testing of the Same as per RESPO norms

Digging of pit in Kachcha/Pakka land in depth upto 1/6 length of pole, Dragging of STP from nearby place/dump, Erection of single pole along with stone pad in bottom with proper alignment on 11 mtr long ST Pole and refilling with ramming of earth

Grouting of pole & Construction of Plinth 300 mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.

Painting of new erected ST Pole with two coat of Red oxide paint, PO red paint at top of pole 2 mtr and balance by two coats of best quality aluminium paint ISI Marks.

Fabrication & erection of Section type double pole for 11 KV line on 11 mtr. long ST-Pole with fixing of necessary clamps & other accesories like 02 No. Top channel 100x50 mm (1600mm each), 02 No. Bracing angle 65x65x6x4300 mm, Cable dropper, Disc Insulator with fitting, Danger board, Number plates and Barbed wire etc. (All material will be provided by contractor except ST- pole, Top channel, Bracing angle, cable dropper, Disc Insulator & Disc fitting).

Fabrication & erection of 11 KV cable exposure type double pole with the provission of bus bar for with fixing of necessary clamps and other acessories like danger board, number plate,barbed wire, 6 no. pin insulators with pins, 2NO. ms CHANNAL & 2no. MS angle for supporting the hoisting on Pole.Its jumpering by single core PVC aluminium cable with proper size of lug. (All material will be Provided by contractor except S.T.Pole, Steel, PVC aluminium cable, earthing rod, Pin & Pin insulator) as per RESPO norms. .

Erection of Stay set 16x1800 mm by digging of pit of size 0.4x0.6x1.6 mtr. Including grouting,binding,nuzzling band fixing of stay insulator with stay wire of size 7/10 swg (All Materials will be provided by Contractor exept Stay Rod (Complete set)And stay wire)

Fixing of earth rod 20x2500 mm as per norms for earthing of support (earth rod to be provided by dept.)

Laying of Single cable 11 kv 3x185 sq mm XLPE in normal soil by digging of trench 900 mm deep 600 mm wide, its boxing with Brick, filling of Sand, and Cover by Stone Slab after laying of Cable proper levelling and ramming. The ferruling of cable also inculde in this work (All the material will be arrenged by Contracter exept 11 kv Cable)

Laying of Single cable 11 KV 3x185 sq mm XLPE in MS pipe 125 mm dia by digging of trench of suitable size as per site condition on road crossing (All the Material will Be provided by the Contracter expect 11 KV XLPE cable)

Laying Of Single 11 KV 3x185 sq mm XLPE cable in HDPE pipe 125 mm dia by digging of trench of suitable size as per site condition (All the Material shall be provided by the Contracter expect 11 KV XLPE cable)

Laying of Single 11 KV 3x185 sq mm XLPE cable in constructed Trench

Cable laying by HDD method

Hoisting of 11 KV 3x185 Sqmm XLPE cable on D/P through G.I.pipe Size 4"dia 3 mtr long including its jumpering complete with holding clamps,PG clamps,Nut & bolts (All Materials will be provided by Contractor)

Making of Heat & Shrinkable joints of following sizes and Types in 11 KV XLPE cable (Jointing kit will be provided by Department)

Out Door end termination Kit For 11 KV 3X185 Sqmm XLPE Cable

In Door end termination Kit For 11 KV 3X185 Sqmm XLPE Cable

S/Th Jointing kit For 11 KV 3X185 Sqmm XLPE Cable

Out Door end termination Kit For 11 KV 3X300 Sqmm XLPE Cable

In Door end termination Kit For 11 KV 3X300 Sqmm XLPE Cable

High Pressure testing of 11 KV 3X185 Sq. mm. XLPE cable. Testing equipment will be arranged by the contractor.

Supply & Fixing of cable root market at the distence of 100 mt. along the cable laying root.

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER