Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC FLAT NO 04 3RD FLOOR HARI BHAVAN PLOT NO 44 MAHANT ROAD VILLES PARLE EAST MUMBAI 400057 | MUMBAI SUBURBAN | MAHARASHTRA | 400057 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹38.4 L+₹4.3 L (12.5%)Rejected-Finance 64 A JASRAJ MANSION 1ST FLOOR OLD HANUMAN LANE KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹43.8 L+₹9.7 L (28.5%)Rejected-Finance B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L3 | Rejected-Finance BEING L3 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
19 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF THANE
Office of Military Engineer Services ,Garrison Engineer (AF) Thane, Kolshet Road, Sandoz Baugh Post, Thane 400607
IMPROVEMENT TO EXISTING INFRASTRUCTURE OF CERTAIN BLDG OF 768 SU (PHASE - I) AT AF STN MADH ISLAND UNDER GE AF THANE
2024_MES_643604_1
8363/E8
Open Tender
Civil Works
Item Rate
180 days
THANE
AS PER NIT
8 documents required · 8 mandatory
₹500
GE AF THANE
₹86,000
Yes
31 Aug 2024
22 Feb 2024
21 Mar 2024
22 Feb 2024
19 Mar 2024
7 Mar 2024
22 Feb 2024 - 7 Mar 2024
Amount
Removing existing water proofing treatment what so ever exist (except concert padding) and removing debris/ rubbish materials off the site complete all as specified and directed by Engr-in-Charge.
M&L for roughening surfaces of old concrete floor by picking, sweeping clan and washing down with water to remove dust & brushing neat cement slurry with 3 Kgs of cement per sqm etc all as specified and directed by Engr-in-Charge.
M&L for Plain cement concrete (PCC) padding in cement concrete (1:2:4) type B0 (using 12.5 mm graded aggregate) finished even and smooth without using extra cement all as specified
M&L for 15mm screed bed or bedding layer in cement mortar 1:4 over RCC Slab horizontal or vertical portion for laying water proofing treatment all as specified & directed by Engr-in-Charge.
M&L for APP modified roof treatment over existing RCC roof with folling specification :- (a) Applying bitumen primer @ 0.4 Liters/Sqm with density of 0.87 to 0.89 Kg/Liters at 25 degree C on the prepared dry roof surface. (b) Laying 3 mm thick APP membrane weight not less than 3.50 Kg/Sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be done through an authorised applicator of manufacturer of APP membrane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar including all quoins, arches, pilllars etc. and precast articles including disposal of demolished material complete all as specified and directed.
M &L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for precast cement concrete block masonry with solid blocks, exc 10 cm in width and and setting in mortar, Type C1 (1:3:6) complete all as specified and directed by Engr - in - Charge.
M & L Reinfrced cement concrete Type B1 (1:2:4) using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specifed and as directed.
M & L Formwork to flat rough finished surfaces of concrete in sides and soffits of suspended slabs such as shelves, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&Lfor rendering 15mm thick in cm 1:6 finished with neeru finish as specified on fair faces of brick work /stone or concrete surfaces complete all as specified and directed by Engineer-in-Charge.
M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 5 mm thick in cm 1:3 on fair faces of concrete as in soffit/ ceilling or slab, chajjas finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Supply only liquid water proofing compound (Make:- Scott No 1/Dr Fixit)
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with camouflage pattern complete all as specified and directed by Engr - in - Charge.
M&L preparing newly plastered surfaces ,and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer Over 3 mm thick wall care putty on wallscomplete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of distempering complete all as specified and directed by Engineer-in-Charge.
M&L preparing Old plastered surfaces ,and applying 2 coats of Oil Bound Distemper over 1 mm thick plaster of paris putty on walls complete all as specified and directed by Engineer-in-Charge.
M&L preparing Old plastered surfaces of ceiling and applying 2 coats of Oil Bound Distemper complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment on surface of wall etc in any position washing down with water and clearing the surface from all loose dirt, chalk, grease, fungi, algai, flakes etc, and applying two coats of weather proof acrylic paint over a coat of weather proof primer with camouflage pattern complete all as specified and directed by Engr - in - Charge.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and as directed
S & F Anodised aluminium snap grid, Size of grid 605 x 605mm frame work for false ceiling all as specified and as directed by Engr - in - Charge
S & F 12mm thick (HPSC) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws
Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L Machine cut kota stone slab flooring 20-25mm thick over and including cement screed base 15mm thick in cement mortar 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat in cement mortar 1:4, 10mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for Cement concrete type D2 (1:4:8) (40 mm graded aggregate) in foundations, filling and mass concrete
M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick or 30cm x 30cm x 25mm thick, set, jointed and pointed with grey pigment cement in floors over and including cement screed bed of 20mm thick in cement mortar 1:6
M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick or 30cm x 30cm x 25mm thick, set, jointed and pointed with grey pigment cement in vertical surfaces as in skirtings, dados and risers of steps over backing coat 10mm thick in cement mortar 1 : 4 .
Removal of existing concrete including loose/weak concrete from the concrete structure i.e. beams/columns/deckslab etc upto beyond corroded steel reinforcements to a depth of minimum 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting and removal of debris. Concrete around the corroded reinforcement shall be removed properly. The edges of the repair locations of concrete should be saw cut to depth of at least 10mm to avoid featheredging and to provide a square edge complete all as specified and directed by Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L for Preparation of surface and removal of rust in the loosely bonded concrete of the RCC deckslab, beam / girder and piles shall be chipped out using the mechanical cutter exposing the bars and applying Rust Remover using small brush and allow to react it for 16- 24 hrs. Before applying protective coating,the surface should be wire brushed and thoroughly cleaned for dust with dry cloth complete all as per manufacturer instructions and directed by Engr- in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L for applying two coats of Anti-Corrosive Primer two component (epoxy anticorrosive zinc rich coating) on reinforcement steel surfaces uniformely. Coating shall be applied by the brush to the exposed and cleaned rebars with an interval of 45 minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours complete all as per manufacturer instructions and directed by Engr- in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L preparation of concrete surfaces by removing loose concrete, dust, dirt etc, cleaning the surface properly and applying one liberal coat of epoxy bonding agent ( two component agent) by brush application complete all as per manufacturer instruction and directed by Engr-in- Charge Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L 50mm thick ( average thickness) modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar on conrete structure. Applying the mortar arround the reinforcement and finishing to bring it in line with existing concrete surface complete all as per manufacturer instructions and directed by the Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L for Providing and applying avg 25mm thick sand faced plaster on external walls of building wherever required which include cleaning the surface, preparing plaster mix in cement mortar in ratio 1:4 (cement : sand) admixed with integral water proofing admixture based on lignosulphates having chloride content as per IS 2645 - 2003 mixed as per manufacurers instructions per bag of cement, levelling and finishing to match existing plaster etc as per directions of Engr - in - Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L for micro concrete to existing concrete structure including proper tight leak proof shuttering SPL polimer modified cementitious ,low permeable'free flow 'non shrink 'self compacting micro concrete shall be grade M70 as per recommended w/c ratio and pouring as per the required thickness complete all as per manufacturer instructions and directed by Engr- in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) and rubbish off the premises.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/dense soil
M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M & L Cement concrete in Plinth protection and similar work using Type C1 1:3:6 (20 mm graded aggregate) all as specifed and as directed
M&L Vitrified tiles 600x600x10mm thick polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge..
M&L Vitrified tiles 600x10x10mm thick polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge..
M&L Coloured Glazed Ceramic tiles 200x300 or 250 x 350 or 350 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge..
M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections 20mm bore, including cleaning for re fixing or removal to store
Taking up or down steel tubing and connections 15mm bore, including cleaning for re fixing or removal to store
Refixing old steel tubing and connections 20 mm bore in new or old position (Walls, ceiling, floors, etc.
Refixing old steel tubing and connections 15 mm bore in new or old position (Walls, ceiling, floors, etc.
S&F GI tubing medium grade including all fittings fixed in floor /walls/ ceilling etc 20mm dia bore. Note : The rates includes necessary cutting through walls, floors, ceiling etc for concealing as reqd and as directed by Engr-in Charge.
S&F GI tubing medium grade including all fittings fixed in floor /walls / ceilling etc,15mm dia bore. Note : The rates includes necessary cutting through walls, floors, ceiling etc for concealing as reqd and as directed by Engr-in Charge.
S&F in repair 15mm bore Stop valves, cast copper alloy,screwed down, high pressure, but fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed all as specified and as directed
S&F in repair bib taps fancy type cast copper alloy chromium plated with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified.
S & F Soap dish, any type, fixed to plugs with chromium plated brass screws
S&F in repair PVC connection with brass socket on both side 60cm for 15mm dia pipe.
S&F PVC, low level flushing cistern with complete fitting incl float valve flush pipe bracket for flush etc 10.0 ltrs capacity in repairs.
S&F in repairs gratings square 150 mm size of PTMT (min wt 100 gm)
S & F in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe
S&F wash down water closet (pedestal pattern/white fixed in repairs Excluding flushing cistern & flushing pipe) complete with & including connecting to drain pipe etc complete all as specified and as directed by Engineer-in-Charge
S & F Fancy type Pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed
S&F in repairs ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore.
S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical verticalwith closed top) with 1000 litre capacity hoisted and fixed in position all as specified in SSR Part I
S & F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore
S & F in repairs health faucet PTMT including long pvc connection all as specified and directed suitable for 15mm bore pipes and fittings.
S & F in repairs Angle stop valve 15 mm dia of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms).
S & F in repairs Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, suitable for urinals, (Minimum weight 15mm-50gms)
S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge.
S& F mild steel confirming to FE-290(Gde-E-165),(Flat sections) as in wind ties and similar work including cutting to required length nothing ,drilling,fitting , connecting with nuts bolts and fixed in true position complete all as specified and as directed by the Engineer in charge.
S & F Plates( Plain or chequered ) of Fe-410-W (Gde-E-250) Quality -B channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roofcoverings
S&F Pre-painted galvalume aluminium zinc cozting GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tappping screws as specified.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed
M&L for preparation of new surfaces of steel of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc Chrome primer.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F aluminum anodised frame powder coated( of approved colour) for doors, windows, ventilators with one or more rebates including joining cleat (min powder coating 50 micron) any track sliding windows/ Doors/Partition frames with aluminum sections mentioned in catalogue of approved manufacturer including water tightening using silicon compound all around etc complete all as specified and as directed by Engr - in- Charge. (Note : Glass, wire cloth shall be measured under respective items)
S&F powder coated of approved colour aluminium grill of 4mm x 6mm bars size of opening 10 cms size mesh RG 103 (as per Royal grill drg attached) with aluminium channel 'F' angle 20mmx15mm aluminium frame work all as directed.
S&F aluminum powder coated( of approved colour) any track sliding windows with aluminum sections mentioned in catalogue of approved manufacturer including suitable Nylon beading, channel gasket, nylon rollers, star lock with handle with complete fittings including water tightening using silicon compound all around etc complete all as specified and as directed.
Taking down the unserviceable Aluminium glass door shutter of any size and description and refixing the same after resecuring the shutter by using aluminium 'L' section at the joints and refixing the glass in the shutter complete all as specified and directed (Note : All accessories required for repairs shall be measured seperately under other respective items)
Taking down aluminium sliding windows of any description and any size and replacing the wornout, broken wiremesh, aluminium sections, glass grill, rubber beading, rollers, locks etc as required and refixing back into the same opening for easy movement of shutters including necessary fittings and fixtures (Note : Items such as i) Wiremesh, ii) Glass, iii) Grill, iv) Rubber beeding, v) Rollers, vi) Locks, vii) Aluminium sections etc will be paid seperately under respective items as supply only)
Supply only ordinary sheet glass 4.8mm thick in square exc 0.5sqm in each panes.
Supply only Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm for aluminium windows and ventilators
Supply only PVC Star lock for Aluminium windows.
Supply only Nylon / PVC Rollers for Aluminium Windows.
Supply only Rubber beeding suitable for aluminium door/window shutters.
S&F double action floor spring hydraulically operated made up of miniumum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty.
S&F aluminium anodised lourvered (fully louvered type), aluminium section mentioned in catalogue 100mm wide heavy duty aluminium blades with 5mm thick frosted glass, lever handle, lock including water tighting using silicon compound etc. complete all as specified/directed
M&L for machine cut cuddappa stone slab 20 to 25 mm thick as in cills/jambs of window & door openings, set jointed and pointed in neat cement slurry with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete including 15mm thick backing coat in cement mortar 1:4
M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and as directed
S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long 12.5mm dia. 40mm long complete all as specified
S & F Anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm all as specified and as directed.
S & F 12mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling all as specified and as directed
Taking down chowkhats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames)
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S& F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F 150mm long Aluminium handles, cast type, anodised all as specified and directed byEngr-in-Charge.
S& F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and directed by Engr-in-Charge.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed by Engr-in-Charge.
S&F 150mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed all as specified and directed by Engr-in-Charge.
M&L for 32mm, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)
S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
S&F in repair PVC (SWR) bends 75 mm bore
S&F in repair PVC (SWR) bends 110 mm bore
S&F in repair Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
Taking down chowkhats or frames exc 1.5 Sqm but n.exc 4.00 Sqm each with shutters (without taking off shutters from the frames)
S&F powder coating (powder coating thickness 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F for ordinary sheet glass 4.8mm thick and glazing with oil putty/beddings in square exc 0.5 sq, in each panes
S& F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work
M & L for preparation of old treated steel surfaces of any description over 10 cm width & girth not otherwise described and applying two coat of epoxy paint over a coat of primer complete all as specified and directed.
Taking down carefully point wiring and removing from site such as (Light,fan socket or power) Complete including fitting and fixtures,fan regulators switch boards,switches,ceiling rose's lamp holder from existing batten PVC conduit/steel conduit wiring complete excluding light fittings and fans all as specified and making good to the disturbed surfaces to match with existing ,complete all as specified and as directed
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and Min 1.6 mm thickness, Min 51 mm depth for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.
All as per Srl item No -122.00 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.
All as per Srl item No -122.00 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.
All as per Srl item No -122.00 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed.
M & L for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC casing & caping , hooks , elbows, juction covers and junction boxes , after cutting in wall and sinking's for modular metal flush boxes suitable length and Min 1.6 mm thickness, Min 51 mm depth for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.
All as per Srl item No -126.00 here in before but for one socket outlet 5/6 amp on independent board complete all as specified and directed
All as per Srl item No -126.00 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed
All as per Srl item No -126.00 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed
All as per Srl item No -126.00 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed
All as per Srl item No -126.00 here in before but for call bell point complete all as specified and directed
M & L for point wiring using approved color coding as per IS with zero halogen flame retardant (HFFR), smoke free,non toxic ,non corrossive installation cable with UNILAY construction copper conductor 1.5 Sqmm (nominal area) ,single core insulated and unsheathed stranded cable 1100 volt grade ISI - 694 marked IEC and FIA approved in and including heavy duty electric resistance welded (ERW) stove enameled conduit ,heavy duty ISI marked as per IS -9557 (part-1) 1980 for one light point controlled by one switch including HFFR insulated unsheathed unilay construction copper conductor 1.5 sqmm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly complete all as specified and directed by Engineer - in - Charge. Following and all other flame proof fitting for wiring shall be incorporated in wiring as required basis and cost there of shall be included in the rate quoted .(a) Flame proof junction box 3 way suitable for ¾” ET conduit material LM-6. (b) Flame proof junction box 2 way suitable for ¾” ET conduit material LM-6. (c) Flame proof junction box 3 way suitable for3/4" ET conduit material LM-6 (d) Supply and fix flame proof union suitable for 20mm dia ERW conduit
S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed
S & F in replacement modular switch 5/6 Amps single pole one way,one module including modular cover plate with frame and metal flush box complete all as specified and directed
S & F in replacement modular switch 15/16 Amps single pole one way,one module including modular cover plate with frame and metal flush box complete all as specified and directed
S & F in replacement modular socket 2/3 pin, type 5/6 Amps 5 in 1 flush type including modular cover plate and metal flush box with frame complete all as specified and directed
S & F in replacement modular socket 2/3 Pin, 6/16 Amps flush type including modular cover plate with frame and metal flush box complete all as specified and directed
S & F modular switch 5/6 Amps single pole two ways including modular cover plate with frame and metal flush box complete all as specified and directed
Supply and fix in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amp complte all as specified and directed
S&F modular bell push 5 Amp complete including modular cover plate with frame and metal flush box complete all as specified and directed
S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete including modular cover plate with frame and metal flush box complete all as specified and directed
S&F Buzzer AC 230 single poleVolt ding dong type complete all as specified and directed
S & F ceiling rose surface bakelite three terminals complete all as specified and directed
Taking down carefully existing serviceable LED Tubelight/ bulkhead/ security light/ recess mount fitting of any size and refixing the same to respective location after carrying out cleaning all the components of fittings, including replacement of nuts, bolts and connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connectorcomplete all as specified and directed
S & F in replacement LED Tubelight fitting with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, surge protection min 4 KVA and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed .
Supply and fixing LED street light fitting 35 Watt 230 V, surge protection 10 KVA, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.& Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.
S&F in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.all as specified and directed.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size completeall as specified and directed .
S & F in replacement LED Water tight bulk head fitting 10 W,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED all as specified and directed.
S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified.
Supply and fixing LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.all as specified and directed
S & F for flame proof exhaust fan 380 mm sweep (15") single phase 0.25 HP motor , 1440 RPM ,2350 cfm complete with louvers and connecting up including provision of cable from ceiling rose or connector to fan as specified and directed
S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed
S&F LED lamp 9W for angle holder complete all as specified and directed
S & F in replacement for Sub Main wiring with two single core 6 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping conduit with and including PVC insulated 6 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) Note :- Two length of 6 Sqmm cable and one length of 6 Sqmm earth cable along with PVC casing caping will be measured as one running length
S & F in replacement for Sub Main wiring with two single core 4 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping conduit with and including PVC insulated 4 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) ( Make of cable - Havells/Anchor/Finolex) Note :- Two length of 4 Sqmm cable and one length of 4 Sqmm earth cable along with PVC casing caping will be measured as one running length
S & F in replacement for Sub Main wiring with two single core 2.5 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing caping conduit with and including PVC insulated 2.5 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing caping shall be ISI marked) ( Make of cable - Havells/Anchor/Finolex) Note :- Two length of 2.5 Sqmm cable and one length of 2.5 Sqmm earth cable along with PVC casing caping will be measured as one running length
S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted TP & N 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof , IP42 and above suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed .
S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted TP & N 12 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP42 and above suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed .
S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP 42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed.
S & F in replacement MCB ‘B’ series type suitable for 415 volts, 10 KA, AC supply 40 to 100 Amps, triple pole and neutral (TPN) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
S & F in replacement MCB ‘B’ series type suitable for 240 volts,10 KA, AC supply 6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
Material and Labour for Earthing complete with copper plate 60cm×60cm ×3.15mm thick electrode, burried directly in ground ( earth pit not less than 2.25 mtrs below ground level) with top edge of the plate not less than 1.5 mtr normal ground level, connected to 20×3mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel as shown in electrical plate No 3 of MES SSR Part-I 2009 connected to earthing test point by means of copper Strip of size 20x3 mm including earthwork, PCC chamber, CI cover, GI pipe protection for strip and watering pipe, funnel, mesh etc all as required at site and all as directed. Note: (i). 7.5 RM Copper strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately. (ii). Earth resistance of earth pit should be less than 1.0 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to include for salt & Charcoal upto & above 450 mm top of earthing plate,testing complete all as specified and directed
Material and Labour for 20×3mm copper strip with suitable GI pipe etc from test terminal block to earth pit complete all as specified and directed.
M&L for Disconnecting electric connection and taking down carefully serviceable ceiling fans, exhaust fan, wall fan and keep in safe custudy. After the building repair work or as directed refixing /hanging the ceiling fan including electric connection with and including new flexible sheathed copper wire 3 core from ceiling rose/connector to fan connector, including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins etc including painting the ceiling fan complete body with blades, canopies, down rod etc. with synthetic enamel paint by spray gun after scraping down old paint in colour as directed complete all as specified
Material and labour for servicing of Split type ACs of any size/capacity by disconnecting the electrical/water connections, taking out from its position, cleaning the external dirt & dust, cleaning air filter, condenser,washing by water jet,drying by air blower,checking all electrical connections and refixing in existing position and testing, complete all as directed
S&F Heavy duty metal body exahust fan of 300mm sweep ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.
S&F Heavy duty metal body exahust fan of 450mm sweep ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.
S&F exahust fan of 300mm sweep made of sturdy Engineering plastic ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) white washing matching with existing colour etc.
S&F ceiling fans AC single phase 230/240 V of size 1200 mm sweep without regulator having Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brushless direct current motor (BLDC) complete with electrical connection providing three core round flexible copper conducter cable of suitable size complete all as specified and directed MAKE: Orient electric 1200mm hector 500. Havells effeciencia neo 1200mm, Cromption Energin HS.
S&F wall mounting fans for 230 volts single phase 400 mm sweep compl;ete all as specified and directed
S&F wall mounting fans for 230 volts single phase 450 mm sweep compl;ete all as specified and directed
Dismantling and Taking down L.T. under ground armored PVC/XLPE insulated and PVC/XLPE sheeted heavy duty 1100 Volts grade under ground cable of any size complete all as specified and directed.
Taking out serviceable unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm during excation of trenches and relaying after cable laying in trenches all as specified and directed
Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 M in depth and getting out in hard/dense soil complete all as specified and directed .
Returning filling in including spreading leveling, watering and well ramming in layers not exe 25 cm each layer complete all as specified and directed.
Removing excavated material to a distance not exe 50 M and depositing where directed not exceeding 1.50 M above the starting point complete all as specified and directed.
Supply and spreading in trenches clear dry sand for cable protection and punning down gently by hand all as specified.
Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 ISI marked flat size 250x150x40 mm laid in trenches as specified and as directed.
Supply and lay jointing and testing and commissioning in replacement of 35 Sqmm x 3.5 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed
Supply and lay jointing and testing and commissioning in replacement of 16 Sqmm x 2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed
Supply and fix 3 pin telephone socket RJ 11 with metal flush box having holes for 20 mm conduit entry for telephone connection all as specified and directed
S & F Rigid non-metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
Supply & fixing in replacement of meter box enclosures size (0.9 mX0.9 mX0.25m) made of Polycarbonate shall have Opaque base & Transparent cover,should be weather/ vermin proof, anti-acid, anti corrosive, UV resistance in accordance with IEC 61439-1, Fire retardant and Self-extinguishing accordance with IEC 6069 5-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960° in accordance with 60695-2-11. Degree of protection against mechanical load should be IK 08 (5 Joule) in accordance with IEC 62262, IP 65 in accordance with IEC 60529 & IEC60439-1, should have Dielectric Properties, RoHS compliant & Halogen free.The meter boxes should be modular and compartmentalized in construction with opaque and transparent cover, properly tightened to base with thermoplastic/SS304 screws /Nuts & bolts having sealing gasket made of extruded silicon rubber to withstand adverse weather effects. The depth of modular meter enclosures should be above 200mm for air circulation & to minimize temp rise during peak Indian summer ambient temperature of 45+ Deg C, lock arrangement ,transperent glass for meter reading, suitable for fixing Electric meter & TPN DB box including taking down existing electric meters , refixing them with four single core PVC copper conductor unsheathed wire multistranded 6 sqmm,properly painting on meter box complete and fixing in wall with suitable cutting,cement work etc complete all as specified and directed
M&L in repairs fire alarm system conventional 4 zone FAP control panel complying ,complete all as specified and directed.
M&L in repairs MCP conventional ABS ,complete all as specified and directed.
M&L in repairs Electronic Hooter 24 Volts DC ,complete all as specified and directed.
M&L in repairs optical smoke detector ,complete all as specified and directed.
Supply and fixing PVC insulated heavy duty armoured copper conductor of size 2x1.5 sqmm cable for fire alarm ,complete all as specified and directed.
Dismantling and refixing old GI strip/Copper Strip of any type and size complete all specified and directed.
M&L for Brazing of copper strip joints for copper strips of any size complete all as specified and as directed
S & F in replacement Porcelain insulator with nut bolt and washer suitable for fixing copper/gi/aluminium strip on wall or ceiling
S & F in replacement Epoxy insulator 100 mm dia conical shape
M & L for Air termination,single pointed, Copper rod 12 mm dia and 300 mm long complete all as specified and directed
M & L for providing test point terminal block, made out of Gun metal or Phosphors bronze,of Size 75 mm X 75 mm X 25 mm drilled and screwed including 03 Nos 8 mm dia, 25 mm long hexagonal head screws complete all as specified and directed
M & L for Aluminium strip 25 mm X 3.15 mm with saddles and fixing screws etc as in roof conductors and down conductor above ground complete all as specified and directed
M & L for GI strip 32 mm X 6 mm buried in ground complete all as specified and directed
M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI Strip 32 X 6 mm as earthing lead ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 50 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed
M & L for GI water tubing,light grade,50 mm,1.2 m long duly threaded on one side in and including fixing of GI socket for fixing of Air termination and including FI clamp of 50 X 6 mm bend to shape for fixing of GI pipe post and fixed to wall (GI pipe 1.2 m will be in single length and no joint will be allowed). Complete all as specified and directed
M&L for steel water tubing medium grade of size 25 mm bore with all fittings laid in trenches or fixed to wall or floor.complete all as specified and directed
M& L Cutting existing steel tubing for alterations or additions 40m or 50 mm size , Add if necessarily done in position without taking down.
S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
M/s Mukesh Engineers
Vishal Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .