REPAIR TO ROOF CEILING FLOORING PLINTH PROTECTION BRICK WORK AND PLASTERING AND REPAIRS TO COMPOUND WALL FENCING CONCERTINA COIL AND MISC BR ITEMS AT ZONE D AREA UNDER GE (E) MATHURA

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and as directed.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type hook bolts in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.

Dismantling asbestos cement corrugated or semi-corrugated etc sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type hook bolts in roofs/walls etc. complete all as specified and as directed.

S&F asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type hook bolts in roofs/walls etc. complete all as specified and as directed.

Dismantling Fibre glass reinforced translucent corrugated sheeting in roof covering complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corugations side lap fixed with coach screw and washwe in roof, wall etc complete all as specified and as directed.

Dismantling timber scantlings (framed work) 40sqcm and over in section, in any position complete all as specified and as directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

S&F MS flat iron wind ties for roof including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Demolition of roof treatment including PCC/ Brick Tiles, Mud phuska PCC padding, plastering, APP membrane complete treatment of any thicknesss and in any position and removing the demolished material out of MoD land complete all as specified and as directed.

M&L for 40 mm thick (avg) thickness cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in padding finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist,angle, channel section and sandstone slab in chajjas upto G+2 floors and finishing face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for bitumen felt water proofing treatment using APP based polymeric membrane minimum weighting 3.00kg/sqm and minimum thickness 3mm reinforced with polyster non wove fabric (but not less than 150gms/sqm) laid over and including bitumen primer applied @ 0.30 Kg/sqm by forced application complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 25mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement complete all as specified and as directed.

M&L for Providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs, mud stops & coping etc, rounded chamfered on edge complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F in repairs solid PVC wall lining and solid PVC partion consisting of 5mm thick plain coloured PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as shown on drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and as directed.

S&F 605x605mm of grid GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.

S&F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frame work with screws fixed as in ceiling flat or sloping complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

M&L for 50 mm thick cement concret type B1 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement compete all as specified and as directed.

Demolition of brick work of any description and in any position built in cement mortar and removing debris outside MOD land complete all as specified and as directed. Note: Usable brick shall be used under item No 54 here-in-after.

M&L for Brick work with old size Fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description from brick walls or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick/concrete surface in cement mortar 1:6 finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work/concrete surface in CM 1:4 by mixing liquid water proofing compound as per manufacturers instructions and finishing surface even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid separately under relevant item of this BOQ.

Supply only water proofing liquid complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 over and including 10 mm thick dubbing coat in cement mortar 1:4 as on ceiling surfaces of concrete finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&l for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L for preparing of new plastered surfaces of walls and applying two coats of exterior emulsion paint Apex over and including a coat of alklai resitant primer complete all as specified and as directed.

M&L for prepration of new plastered surface of walls and providing 1mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of distemper oil emulsion over and including a coat of primer complete all as specified and as directed.

Taking up or down mild steel tubes galvanized iron 20 mm bore dia and connections and removed from site complete all as specified and as directed.

S&F for 20mm bore tubes, medium grade galvanisd with all fittings fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) hoisted and fixed in position 500 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) hoisted and fixed in position 750 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) hoisted and fixed in position 1000 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed ( Minimum weight 210 gms each) complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500 & 1000 ltrs rotating type with frame including nut bolt complete all as specified and as directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

S&F, Gun matel, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore dia and fixed all as specified and as directed

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls with clamps etc including dismantling old pipe complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius complete as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F 110 mm bore PVC (SWR), vent cowl complete as specified and as directed.

S&F 75mm bore PVC (SWR) bends any radius complete as specified and as directed.

M&L for Brick work using old size Bricks retrived from serial item No 26 here in before straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. Note : Old bricks retrived from Item Serial No 26 here-in-before shall be used.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground/ PCC/ Brick work and making good disturbed area complete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

M&L for cement concret 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-16 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 5 to 10mm diawith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F mild steel round bars 10mm dia cut to length, bent to shape required bent to shape hoking end required and fixed in fencing confirming to Fe 410-W or Fe 290 complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete as specified and as directed.

Supply only MS galvanised chain link fencing having dia of wire 3.15 mm and mesh size 100mm x 100 mm complete as specified and as directed. Note: A BOO shall be detailed by GE to ascertain the actual weight of chain links fencing brought by contrctor at site for incorporation in work on intimation of Engr-in-Charge.

S&F in repair galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins complete as specified and as directed Note: (Each line wire to be measured)

S&F in repair Concertaina coil 450 mm dia with 2.50 mm dia high tensile strength wire fixing to Y-shaped angle iron posts securing with necessary clips on top of boundary wall complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping etc. complete all as specified and as directed.

M&L for broken glass coping on top of walls embedded in 25mm thick cement mortar 1:3 complete all as specified and as directed. Note : Broken glass shall be with a rounded or weathered finish and before the mortar has set, glass (of bottle or thick glass) broken to approximately 63mm gauge, shall be firmly embedded at the rate of 10 Kg of glass per square metre of rendered surface, jogged edges of the glass being left projecting.

M&L for 75mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in Sub-floor, Sub- bases, Floors and paving etc finished surface even and fair with using extra cement, laid in alternate bays & joints filled with bitumen and sand mixed in 1:3 complete all as specified and as directed.

M&L for Chequered cement concrete tiles (with white cement and pigment) 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base Sub floor, foors and paving etc complete all as specified and as directed.

M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggragate) roof kerb or mud stops, moulded or chamfered on edges complete all as specified and as directed.

Taking down door chowkhat or frames with shutters without taking off shutters from frame area exc 1.5 sqm and n. exc 4 Sqm each complete as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for door windows, ventilators (sliding, fixed or casement) with one or more rebates including joining cleat for fixing etc,complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for door windows, ventilators aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised alumnium snap beading, screws etc complete all as specified and as directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) prtitions (Fixed partition) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair, Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

M&L for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door etc, (exclusive of steel sheeting or other covering running rails & guides) also fastening and fixing complete all as specified and as directed.

SARTHAK CONSTRUCTIONS

M/s RCC

M/s M S CONSTRUCTION

shyam construction

B S ENTERPRISES

Ms Kamal Kant Agarwal

NAYYAR BUILDERS N ENGINEERS

mh enterprises

JWALA ELECTRIC CONTRACTORS

VASUNDHARA AND COMPANY

M/s Hoti Lal Contractor

M/S YATENDRA SINGH