EOR to FSMA, Rohini, Delhi. During 2021-22. (SH- Providing and Fixing Chairs for Classrooms.). (Modified)

Amount

Supply of Modular integrated Desk & Seating System for Training Room. The Systems are as follows:- Front Row Desk of overall size 1450W x450D x810/910mm HT The under structure is made of combination of 80x40x1.5mm, 25x25x1.2mm, 75x25x1.2mm, & 25x50x1.2mm cold rolled close annealed (CRCA) superior quality steel pipe duly epoxy based powder coated. The table top is made up of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature & modesty panel made of 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature. Modesty panel of size 1350x510mm (wxh). Below the Table Book Rack made up of cold rolled close annealed (CRCA) perforated sheet in 0.8mm thick of size 1190Wx 250Dx100H mm. The Table will be fixed with steel dish of size- 150x100x8mm thick for both side legs & 150x125x8mm thick for middle leg. All steel component are duly epoxy based powder coated with 50-60 micron. It is also having foot rest 25x25x1.2mm cold rolled close annealed (CRCA) superior quality steel pipe with 18mm thick thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature. Desk also provision of bottel holder two numbers on each desk made of cold rolled close annealed (CRCA) sheet duly powder coated. All the Steel components shall be welded together to form one unit duly powder coating dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 10 tank pre treatment process flow using hankel chemical i.e. Degreasing (Ist tank), Water Rinsing I (2nd tank), Derusting (3rd tank). Water Rising II (4th tank), Water Rising III (5th tank), Surface Activation (6th tank), Phosphating (7th Tank), Water Rinsing IV (8th tank), Passivation (9th Tank), Hot Air Dryer (10th tank).

Supply of Modular integrated Desk & Seating System for Training Room. The Systems are as follows:- Middle Row with two seater Overall size 1450W x 810 mm HT and seating size 475Wx525mm Depth with individual box type arms for each seating. The Table under structure is made up of combination of 80x40x1.5mm, 25x25x1.2mm, 75x25x1.2mm, & 25x50x1.2mm cold rolled close annealed (CRCA) superior quality steel pipe duly epoxy based powder coated. The table top is made up of 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature & modesty panel made of 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature. Below the table book rack made up of cold rolled close annealed (CRCA) perforated sheet in 0.8mm thick of size 1190Wx 250Dx100H mm. Depth below the table top in front of table assembly spring loaded tip up two seater chair attached which is made up of 12 mm ply with moulded 40 density foam and high quality PVC cover below the seat and moulded foam for back along with 220 GSM FABRIC on seat & back. The chair will have individual box type arms for each seating. Handle assembly box type both side arm of size-450x500x75mm. Middle sharing arm 130x450x675mm. The Table will be fixed with steel dish for of size- 150x100x8mm thick for both side legs & 150x125x8mm thick for middle leg. All steel component are duly epoxy based powder coated with 50-60 micron. It is also having foot rest 25x25x1.2mm cold rolled close annealed (CRCA) superior quality steel pipe with 18mm thick prelaminated board duly edge banded with 2mm PVC edge banding. Desk also provision of bottel holder two numbers on each desk made of cold rolled close annealed (CRCA) sheet duly powder coated.All the Steel components shall be welded together to form one unit duly powder coating dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 10 tank pre treatment process flow using hankel chemical i.e. Degreasing (Ist tank), Water Rinsing I (2nd tank), Derusting (3rd tank). Water Rising II (4th tank), Water Rising III (5th tank), Surface Activation (6th tank), Phosphating (7th Tank), Water Rinsing IV (8th tank), Passivation (9th Tank), Hot Air Dryer (10th tank).

Supply of Modular integrated Desk & Seating System for Training Room. The Systems are as folows:- Last Row of size 1450W x 810 mm HT and seating size 475Wx525mm Depth with individual arms for each seating. The Table under structure is made up of combination of 80x40x1.5mm, 25x25x1.2mm, 75x25x1.2mm, & 25x50x1.2mm cold rolled close annealed (CRCA) superior quality steel pipe duly epoxy based powder coated. Spring loaded tip up chair with individual box type arms for each seating the table top made up 25mm thick prelaminated particle board the edges shall be sealed with 2mm thick strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius temperature. In front of table assembly spring loaded tip up two seater chairs attached which is made up of 12mm ply with moulded 40 density foam and high quality PVC cover below the seat and moulded foam for back along with 220 GSM FABRIC on seat & back. The chair will have individual box type arms for each seating. Handle assembly box type both side arm of size-450x500x75mm. Middle sharing arm 130x450x675mm. The Table will have be fixed with steel plate 8mm thickness fasteners of 125mm. All steel component are epoxy based powder coating with 50-60 micron. All the Steel components shall be welded together to form one unit duly epoxy based powder coating dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 10 tank pre treatment process flow using hankel chemical i.e. Degreasing (Ist tank), Water Rinsing I (2nd tank), Derusting (3rd tank). Water Rising II (4th tank), Water Rising III (5th tank), Surface Activation (6th tank), Phosphating (7th Tank), Water Rinsing IV (8th tank), Passivation (9th Tank), Hot Air Dryer (10th tank).

Ganpati Furniture Systems Pvt Ltd

M P BHATIA

DELITE HI-TECH FURNITURE IND.(P) Ltd.