Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.6 LAccepted-AOC | 1 | Accepted-AOC Ok | |
| 2 | 2₹19.0 L+₹3.4 L (21.5%)Rejected-Finance A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | 2 | Rejected-Finance Other than lowest tenderer | |
| 3 | 3₹19.7 L+₹4.1 L (26.0%)Rejected-Finance PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | 3 | Rejected-Finance Other than lowest tenderer | |
| 4 | 4₹19.7 L+₹4.1 L (26.4%)Rejected-Finance | 4 | Rejected-Finance Other than lowest tenderer | |
| 5 | 5₹23.5 L+₹7.9 L (50.3%)Rejected-Finance N A | NA | NA | 121004 | 5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Aug 2021, 6:00 pmClosed
GE E/M BASE HOSPITAL DELHI CANTT
GE E/M BASE HOSPITAL DELHI CANTT-110010
EXTERNAL / INTERNAL PERIODICAL SERVICES AND CONNECTED ITEMS IN CERTAIN BLDG AT ZONE-B BASE HOSPITAL UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10
2021_MES_460914_1
GE/BH-36/2021-22
Open Tender
Civil Works
Item Rate
270 days
GE E/M BASE HOSPITAL DELHI CANTT
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE E/M BASE HOSPITAL DELHI CANTT
₹90,000
Yes
11 Sept 2021
20 Jul 2021
14 Aug 2021
20 Jul 2021
12 Aug 2021
4 Aug 2021
Amount
M & L for Preparation of old wall surface by scrapping using electrically operated grinder machine/ electric sand paper machine and filling/ repairing the surface with cement based wall care putty, then scrubbing by sand paper to prepare a even surface and applying cement based primer on patches and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and finally applying one coat of oil bound distemper (OBD) of colour as approved by Engr-in-Charge (to match with existing colour) complete all as specified and as directed.
M & L for Preparation of old wall surface by scrapping by electrically operated grinder machine/ electric sand paper machine and filling/ repairing the surface with cement based wall care putty, then scrubbing by sand paper to prepare a even surface and applying cement based primer on patches and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and finally applying two coats of oil bound distemper (OBD) of colour as approved (Colour scheme shall be as approved by the GE & user) complete all as specified and as directed.
M & L for Preparation of old ceiling surface by scrapping using electrically operated grinder machine/ electric sand paper machine and filling/ repairing the surface with cement based wall care putty, then scrubbing by sand paper to prepare a even surface and applying cement based primer on patches and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and finally applying one coat of oil bound distemper (OBD) of colour as approved by Engr-in-Charge (to match with existing colour) complete all as specified and as directed.
M & L for preparing the old surface of wall by washing down and rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of plastic emulsion paint, interior grade, using roller on walls complete all as specified and as directed. Make - Asian Paints Royal Health Shield or equivalent of make specified in PS.
M&L for preparation of old wall surface by brooming down or steel wire brushing, removing all loose layers, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and filling all nail holes and patches with cement based wall care putty and finally applying one coat of cement based paint on old plastered surfaces complete all as specified and as directed.
M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/ electric sand paper machine washing down with water and filling/ repairing the complete surface with cement based wall care putty, then scrubbing by sand paper to prepare a even surface and applying cement based primer on patches and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of priming paint complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS.
M&L for preparation of old decorated, wall, chequered floor, roof (corrugal) surface by brooming down or steel wire brushing, removing all loose layers, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the existing surface) complete all as specified and as directed. Make- Asian Apex Ultima or equivalent of make specified in PS.
Note for item Nos 5.00 to 7.00: Quoted rates shall deemed to be inclusive of painting at any height (upto 4 storied) including scaffolding work, as required.
M&L for preparing the old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparing the old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing the old painted Aluminium surface of any description exc 10cm width or girth and applying one coat of spray painting of approved colour complete all as specified and as directed.
M & L for preparing the old painted wall surface/Kerb stone by brooming and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster /washed stone grit plaster on brick or stone wall etc including racking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M& L for 15mm thick rendering in cement mortar 1:4 (at any height with scaffolding) on brick or concrete surfaces finished even and smooth without using extra cement mixed with 3% water proofing compound by weight of cement complete all as specified and as directed. Note: WPC shall be measured and paid separately under respective item of this schedule as "Supply only".
M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick/concrete surface of wall, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new wall surface and applying two coats of cement based paint complete all as specified and as directed.
M & L for preparing the newly plastered wall surface and applying two coats of oil bound distemper over and including a coat of cement based wall care putty as levelling course on plastered surfaces to distempering preparatory on walls complete all as specified and as directed.
All as per item No 17.00 here in before and applying two coats of oil bound distemper on ceiling surfaces complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified & as directed.
M&L for guniting of spelled/corroded reinforced cement concrete surface, on vertical surface, on vertical or overhead position, comprising of chipping of spelled and loose concrete; cleaning rust form reinforcement by sand blasting; scrubbing down concrete surface with wire brushes; cleaning with water; allowed to dry and applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited; applying two layers of guniting over steel welded wire mesh having 4mm dia of wire and aperture 75mm, total thickness of gunite not exc 40mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade weight cement duly mixed with polycrete admixture @2% by weight of cement or as per manufacturer's instruction and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins. fascias, parapets, lintels columns & beams etc with and including necessary scaffolding, shuttering, chases to brick work or RCC members etc, complete all as specified and as directed.
Note - Site shall be handed over to as per availability and requirement/ piece meal. Contractor shall have no claim on this account, payment shall be made as per actual measurement of work done by the contractor.
R D ENTERPRISES
Shivam Firetech Engineers
M/S GEETANJALI ENTERPRISES
MAA SANTOSHI ENTERPRISES
M/S Parshant Associates
friends associeates
SARKAR BUILDERS
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .