31/EUDC-MAHA./LESA JZ/2024-25

Amount

Safe Loading carriage & unlo-ading of following material from central store to JE Store/work site

ST pole 11/9 mtr

PCC 8.5 MTR

11/0.4 KV 100KVA T/F

11/0.4 KV 250KVA T/F

11/0.4 KV 400KVA T/F

LT Cable 1x240//630/ 400 mmsq

Transportation from central store to site 11KV XLPE Cable 3x120/185 sqmm

11KV XLPE Cable 3x120/70 /185 sqmm Termination Kit

Transportation from central store to site ACSR /Weasel conductor

11KV Polymer Insulator

11KV polymer Disc Insulator

ABC Cable 3x120/95/50/25sqmm

Safe Carriage of 9/11 Mtr ST pole/PCC Pole from Dump site to pit site

Fabrication errection of sub station type double pole on ST pole along with fixing of necessary clamp ,accessories required including supply and fixing of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per respo specification ,making 11 KV Busbar by single core PVC .Only pole and pin with insulator clamp nutbolt provided by department

Fabrication errection of sub station type double pole for mounting of 100/250 KVA T/F on ST pole along with fixing of necessary clamp ,accessories required including supply and fixing of MS channel on top dropper with arrangement of 2Nos MS Channel 100x50mm and locking clamp with MS Channel Bracket for mounting of T/F fixing of 3 Nos pin insulator as per respo specification ,making 11 KV Busbar by single core PVC .Only pole and pin with insu-lator clamp nutbolt provided by department

Mounting of existing Double Pole 2 Nos MS Channel and 2 Nos MS channel bracket fixing with the help of Clamp its grouting and plinthing properly for mounting of 100 KVA T/F

Errection 8.5 mtr PCC/ST Pole by digging pit upto 1/6 depth of pole errection of pole refilling of earth and proper raming Binding of LT AB Conductor line accesso-ries

Laying of LT Cable 1x240/400/630 sqmm with suitable size of Al lug all material provide by depart-ment

Hoisting of LT Cable on pole through GI Pipe requied size clamping on pole only cable provided by department

Proper Jumpering of LT Cable on O/H Line

Making 11KV Bus bar on newly erected Double pole and tapping of 11KV line

Laying stringing and sagging of 11KV Line on ACSR Conductor

Prepare proper space for construction of plinth

Construction of T/F plinth of size 2x2x1.2 Mtr with first class bricks and massonary work in the ratio 1:4cement and course sand fiiling of structure completely as per norms with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS chaanel for resting of T/F.All material provide by contractor exept T/F

Fabrication and fixing of wiremesh fencing around the11/0.4KV T/F and DP Box made as per require-ment 2mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wirem-esh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support,groutin properly by cement concrete and course sand all material provided by contractor

Construction of massonary type DP Box with First first class brick ballast ,course sand ,cement and MS Bar local sand by making 2 Nos pillar 1 Mtr long 25mm width 6 feet height above ground level ,fixing of 2 Nos MS Angle for mounting of Henlay type fuse unit plastering both side with provision of ,all material arrange by contractor

Fabrication and fixing of” D” Type Bracket on Existing /Newly Double pole with provision of MS Angle angle and clamp for mounting of Tailless type fuse unit

Fabrication and fixing of 500 Amp 650 Volts Fuse Unit

Fabrication and fixing of copper Busbar of size 50x6mmx750mm

earthing of Pipe type with 60 feet deep boring and provid-ing jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe

Laying of 11 KV cable3 x70 /120sqmm in pukka road by drilling method

Laying of 11 KV cable3 x185sqmm in pukka road by drilling method

Hoisting of cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole

High pressure testing of 11KV Cable by high pressure equipment

Errection and commissioning of AB Conductor of size 3x120/95/50/sqmm

Supply and fixing of clamps

Holding clamp

LT Clamp for pole with GI Strip and schckle insulator

Crimping Al Lugs 240/400/630 sqmm

Copper L-Piece for T/F

Nutbolts off size

Danger board with clamp

G I Pipe 100 mm Dia

Sundry Item

Ordinary Earthing by MS Earth rod2500 mm long by GI wire all material provide by Contaractor

Fixing and installation of 11KV /33KV O/D type XLPE Jointing Kit ,olny jointing kit provide by department

Providing fabrication and fixing of DO Fuse set

Providing Fabrication and fixing of 11KV TPMO Set AB Switch with GI pipe

Grouting of pole by cement course sand and brick ballast Civil material provided by Contractor

Painting of ST pole by 2 coat of red oxide and 2 coat of Al paint Paint provided by contractor

Safe installation of 11/0.4 KV 100 KVA T/F its connection from 11KV line and LT line mounting of conector providing and fixing of al lugs Labour &T&P Provided by contractor

Safe installation of 11/0.4 KV 250 KVA T/F its connection from 11KV line and LT line mounting of copper L-piece providing and fixing of al lugs Labour &T&P Provided by contractor

Safe installation of 11/0.4 KV 400 KVA T/F its connection from 11KV line and LT line mounting of copper L-piece providing and fixing of al lugs Labour &T&P Provided by contractor

Chemical type earthing by digging of pit fixing of electrode earthing rod filling of Bentonite powder around the rod and water ,connect the GI Strip 32x5 mm with wiremesh fencing and DP Box.

DEEPAK ENGINEERING (BID ID -4791519)

LUCKY ENTERPRISES (BID ID -4795496)