PROVISION OF ADDITIONAL CLASS ROOM FOR AIR FORCE SCHOOL AND PROVISION OF HARD STANDING NEAR HELIPAD GROUND AND OBSERVATION POST WITH STEEL LADDER IN TECH AREA AT AF STATION BORGAD

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/ dense soil complete. (135+30)

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth for foundation etc or for shaft, wells cesspits, manholes, pier holes n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in hard/ dense soil all as specified and directed. (8+0)

All as per item no 2 above but in soft/ disintegrated rock. (0+27.76)

All as per item no 2 above but in hard rock. (0+13.88)

Material and labour for PCC type D2 (1:4:8) by using 40 mm graded stone aggregate as in foundation, filling and mass filling complete all as specified & directed. (4.25+4.60)

Material and labour for formwork to sides of foundation, bases of column, plinth beam and similar articles for rough finished surfaces of concrete complete all as specified and as directed. (87+12)

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs including splays between floors and beams, etc.for rough finished flat surfaces of concrete complete all as specified and directed. (81+25)

All as per item No. 07 above but in columns, pillars etc., square or rectangular in shape. (77+33)

Material and labour for formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, cooking platform and similar work not exc 200 mm thick for rough finished surface of concrete,all as specified & directed. (122+30)

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. (64+33)

Material and labour for formwork to sides and soffits of chajjas for rough finished surfaces complete all as specified and as directed (4+0)

Material and labour for formwork to fins, louvers, fascia for rough finished surfaces complete all as specified and as directed. (5+0)

Material & labour for reinforced cement concrete of M-25(Design Mix) using 20 mm graded stone aggregate in foundations including footings, plinth beams; bases for columns, etc.; basement slabs all as specified and as directed. (13+2.5)

All as per item No- 13 above but in but in beams, cantilevers, bressummers Seismic and other similar band. (6.25+2.5)

All as per item No- 13 above but in columns, pillars etc. (5+2.5)

All as per item No- 13 above but in slabs sopported on walls ,beams and columns in floors ,roofs. (15.5+4.1)

All as per item No- 13 above but in Chajjas. (0.3+0)

All as per item No- 13 above but in fins, fascias, louvres of any height and any design, newels, balustrade, and the like etc. (0.5+0)

Material & labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. (1810+588)

All as per item No 19 herein before but 6 mm to 8 mm dia (1420+400)

All as per item No 19 herein before but 5 mm dia and over upto and including 10 mm dia as in stirrups. (750+300)

Material & labour for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed (30+3)

Material and labour for rendering 10mm thick internal surfaces in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. (220+18)

Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound finished with even and smooth complete all as specified and directed. (110+41) Note: WPC shall be measured and paid separately under relevant item of this Schedule.

Material and labour for 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed. (125+30)

Material & labour for 75 mm thick PCC sub base 1:4:8 type D-2 (40 mm graded stone aggregate) finished complete all as specified and directed. (88+30)

Material and labour for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. (22+40)

Material & Labour for hard core of broken stone or boulders of gauge n. exc 63mm and deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. (12+50)

Material and Labour for polished machine cut kota stone of size not less than 550mm x 550 mm of uniform colour and 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab over and including 15mm thick screed bed in CM 1:6 as in flooring complete all as specified and directed. (90+0)

Supply and fix for polished machine cut kota stone of size not less than 550mm x 550 mm of uniform colour and 20-25 mm thick over over cement screed base laid and jointed with grey cement slurry mixed with pigment over and including 10 mm thick screed bed in CM 1:4 on brick work/ stone mansonary or concrete surfaces as in risers / skirting / dado all as specified and directed. (8+0)

Material and labour for 10 mm thick rendering on RCC Roof top surface in cement mortar 1:4 mixed with WPC @ 3% by wt of cement finished the surfaces even and smooth complete all as specified . (136+0) Note: WPC shall be measured and paid separately under relevant item of this Schedule.

Supply only approved integral water proofing compound. (65+0)

Material and labour for roof treatment on RCC roof slab complete as mentioned here in below: (i) Preparation of new plaster RCC roof slab surfaces and applying a coat of hot blown bituminous primer @ 0.3 lit/sqm on top of dry surface. (ii) Laying APP membrane of thickness 3mm thick with (weighing 3.2-3.5 kg/ Sqm) reinforced with non woven polyster mat of weight 160gm/ sqm as centre core by thermo fusion using LPG torch on the bottom portion of the membrane. (iii) Applying two coat of bituminous aluminium paint @0.20 kg/sqm (total in two coats) (136+17)

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion weather proof anti fungal paint over one coat of priming paint plaster coat on external surface on wall complete all as specified and as directed. (110+41)

Supply and fix for second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. (0.04+0)

Material and labour for 35 mm thick factory made second class hard wood plain framed panelled door shutters ( two panels) with 12 mm thick veneered particle board with commercial face veneers on both side's as panel inserts, style & rails shall be second class hard work timber generally conforming to IS-1003 (Part-I) (Door Shutters) kiln seasoned and chemically pressure treated all as specified and as directed. (4+2)

Supply and fix MS framed work as in doors and gates of angle or other section with gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging : also fastening and fixing complete all as specified and directed.

Supply and fix MS butt hinge, medium weight, cold rolled mild steel 100mm long with necessary bolts all as specified and as directed. (6+3)

Supply and fix aluminium, anodised, barrel tower bolt of extruded section, 200mm long complete all as specified and as directed. (4+2)

Supply and fix extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified and directed. (2+2)

Supply and fix floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 140 mm all as specified and as directed. (2+1)

Supply and fix aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. (2+0)

Supply and fix mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed. (0+2)

Material and labour for aluminum powder coated sliding window with aluminium powder coated three track frame of size 116mm x 32mm x 1.3 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 40mm x 80 mm x 0.9 mm screwed to walls/floor including provn of tinted sheet glass panels of 5mm thick fitted in pannels (2 Nos) and one shutter with aluminimum wire cloth 0.45 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed. (9+5.4)

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. (150+75)

Supply and fixing stainless steel 25mm dia Drapery curtain rod with SS brackets and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed. (15+17)

Materials and labour for applying two coats of synthetic enemal paint over one coat of red oxide or zinc chrome primer, of any description over 10cm width or grith including preparation of new or previously untreated surfacts of steel complete all as specified and directed. (12+6)

Material & labour for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. (10+6)

Material and labour for applying 1-2 mm thick wall care putty in two layers on newly plaster surface of walls to achive smooth surface complete all as specified and directed. (220+0)

Material and labour for preparation of newly plastered /wall care putty surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. (220+0)

Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. (125+0)

Material and labour for 75mm thick PCC 1:3:6 mix type C2 as in plinth protection laid in alternate bays n exc 2.5 m length finished even & fair and joint to be filled with Bituminous mastic filling complete all as specified and directed. (34+0)

Material and labour for non skid ceramic coloured tiles 400 mm x 400 mm x 7 to 8 mm thick laid( joint free) in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed. (0+6)

All as per item No 53 above but in skirting over 15 mm thick plaster in CM 1:4 including necessary cuting of tiles to size as required all as specified and as directed. (0+1)

Material and labour for rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. Confirming to Fe 410-W (grade-E-250 ) quality A complete fixed to walls all as specified and as directed. (0+300)

Material & labour for granite (of any type and any colour) work of 18 mm to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over 10 mm thick screed bed or bedding layer in CM 1:4 for laying floor finish including moulding on exposed edges complete all as specified and as directed. (3+0)

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25mm thick in any type of soil, complete all as specified and directed. (35+8)

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed. (39+0.76)

Material & labour for treating the bottom and sides of excavation at the rate of 5 litres of Anti termite emulsion per square metre of surface area complete all as specified and directed. (40+0)

Material & labour for treating the backfill in contact with foundation at the rate of 7.5 litres of Anti termite emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. (8+0)

Material & labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. (88+0)

Material & labour treating the soil under plinth protection at the rate of 5 litres of Anti termite emulsion per square metre of surface area complete all as specified and directed. (34+0)

Demolition of brickwork or stone /boulder masnory, built in cement mortar including all quions, arches, pillars etc complete all as directed. (2.5+0)

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete all as directed. (20+0)

Dismantling of fencing wire mesh and chain link fencing any type all as directed (22+0)

HARDSTANDING Note: Excavation, PCC, RFR, hard core and morrum filling shall be maesured under relevant items here-in-before.

Excavation over areas to a depth n.exc 1.5 m deep and getting out in soft/ disintegrated rock complete all as specified and as directed. (0+100)

All as per item No 67 above but in hard rock complete all as specified and as directed. (0+45)

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in CM 1:6 all as specified and as directed. (0+41)

Material & labour for precast cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in kerb stone by using vibro compection process with jointless FRP moulds, size, design and shape as directed with plain fair faces, including chamfers, weatherings,throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and as directed. (0+0.6)

Material and labour for PCC 1:3:6 type C1 (20mm grade agg) as in Precast Concrete block as in Bond stone and similar articles set in cement mlortar 1:6 all as specified and as directed. (0+1)

Material & Labour for plain /reinforced cement concrete type B-1, 1:2:4 ( using 20 mm graded stone aggregate) cast in situ in lintels upto 1.5m span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item , water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary formwork complete all as specified. (0+3)

Material & Labour for Keyed pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto course complete all as specified. (0+9.2)

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 40mm to face stones and dressing of face beds and joints as specified of random rubbles walling uncoursed granite or trap all as specified and directed. (0+92)

Material & Labour for Rolling and consolidating formation surfaces in cutting by using power roller 8 to 12 Ton power roller all as specified and directed. (0+50)

Material & labour for 100 mm thick PCC sub base 1:3:6 type C-2 (40 mm graded stone aggregate) finished complete all as specified and directed. (0+500)

Material & labour for 150 mm thick cement concrete type A2 1:1.5:3 (using 40 mm graded stone aggreagte) as in hardstanding including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. (0+500)

Material & labour for Machine pressed rubber moulded precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness made with Grey cement and pigment, M-35 Grade complete all as specified and as directed. (0+30)

Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. (0+0.75) Note: punned thickness only will be measured and paid.

Material and labour for forming 12 mm wide expansion joint filled with pre-formed bituminous filler on top 30 mm primed and sealed with sealing compound grade “A” for 150 mm concrete slab complete all as specified and as directed. (0+1.6)

Material and labour for forming construction (dummy) joint of 50 mm deep and 10 mm wide filled with sealing compound grade “A” complete all as specified and as directed. (0+8.8)

Material and labour for preparation of new surfaces to receive surface for painting lines, dashes,arrows, letters etc on road , pavement,hardstanding and like not exceeding 10 cm wide with two coats of road marking paint of white / yellow/ golden/ red of approved shade complete all as specified and as directed. (0+10)

Removing excavated material to a distance exc 250 m but n. Exc. 500 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and directed. (0+119)

INTERNAL ELECTRIFICATION

Material and labour for point wiring (concealed on wall and suface on ceiling) complete with two single core FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including heavy duty PVC conduit not less than 20 mm wide including all necessary accessories and making good the disturbed surface with and including suitable sunken box with earth dolly arrangement with surface plate for mounting modular switches /sockets /regulators etc., and one run of 1.5 sq mm copper earth continuity copper conductor FRLS grade connected to earth dolly complete for one light point /fan point/ exhaust fan/push button controlled by one switch all as specified and as directed. (22+2) Note: The quoted rate shall deemed to be included cost for cutting chases in wall/ roof/ floor including making good of disturbed surfacs and painting to match with existing surfaces.

All as per item No 84 above but 2.5 Sqmm FRLS PVC cable suitable for housing modular switches, sockets, fan regulators, etc (2+1)

All as per SI item No. 84 above but for one 3 pin socket out let 6 Amps on independent board. (4+0)

All as per SI item No. 84 above but for one 3 pin socket out let 4 Amps on same board. (4+0)

Supply and fixing modular switch one way 6 Amp, 1 module all as specified and directed. Make: Legrand, model Mylinc, Cat No. 675501 or equivalent in Anchor Roma/ Havells (Crabtree) (30+2)

All as per SI item No. 84 above but 16 Amp (2+1)

Supplying and fixing modular socket, 6 amps-2/3 pin combined, 2 module complete all as specified and as directed. (2+1)

All as per SI item No. 84 above but 6/16 Amp (2+1)

Supply & fix ceiling rose surface type, PVC/ Polycarbonate insulated body of size 50x28 mm two to three terminals. (22+2)

Supply and fix in repair decorative ultra slim square profile linear DELITE LED lightining fixture extruded polycarbonate, environmental friendly, energy efficient ready to use pack 18 W LED 6000 K complete with connecting accessories duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible copper cable cord from fitting complete all as specified and directed Make: Havelles. model No. LHEXBTP7UN1W018 or equivalent in Baja/ CG. (18+0)

Supply and fixing ceiling fan 1200 mm sweep including connecting with provision of flexible cord 3 core stranded copper conductor of size 0.50 sqmm from connector block to fan including connection to earthing point and fixing regulator including taking down unserviceable fan from existing position all as specified and directed. Make: Havelles model ES-50, 5 star white colour or equivalent in CG/ Bajaj (4+0)

Supply and fix decorative ultra slim square profile linear TRIM LINEA lightining fixture extruded polycarbonate, environmental friendly, energy efficient ready to use pack 10 W LED 8000 K complete with connecting accessories duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible copper cable cord from fitting complete all as specified and directed Make: Crompton. model No. LDLSR-10-CDL or equivalent in Baja/ Havelles (0+2)

Supply and fix sub main wiring along with earth wire with PVC insulated un armoured multi stranded copper conductor heavy duty 1100 Volts grade single core FRLS cable two runs of 4 Sqmm cable plus one run of 4 Sqmm as earth wire for continous earth fixed on wall/ ceiling/ floor etc. drawn through PVC casing capping including PVC casing capping / conduit and accessories also including making hole to pass through wall, termination in DBs and making connections by using the suitable size of copper bottle type ferrule/lugs including taking down unserviceablesubmain from existing position complete all as directed by Engineer-in-Charge. Note: (i) Two runs of 4 Sqmm wire and one run of 4 Sqmm wire including one run of PVC casing capping/ conduit shall be measured as a one length of submain wire. (0+10)

Supply and fix wall mounted fan of sweep 400 mm operated on 230V AC single phase electric supply with oscillating mechanism and built in speed control regulator complete with 3 core standard copper conductor of size 0.5 sqmm for minimum 2 mtr long with 2 pin 5 Amp moulded top size all as specified and directed. Make: Havells Model Swing or equivalent in CG / Bajaj . (0+1)

EXTERNAL ELECTRIFICATION Note: RFR, shall be maesured under relevant items here-in-before.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and getting out in soft/ loose soil all as specified and directed. (8+0)

Material & labour and fixing of DWC pipes it should be flexible in diameter as well as in joints under external load and soil natural movement, socket & spigot joint with elastometric sealing ring, it should be highly corrosive resistant and it should be impact resistant, chemical resistant, flexible, light weight and it should have hih flow capacity of internal 38 mm dia as per IS-14930 complete with coupler, elbows, joints and necessary joints required for completion of works all as specified and directed. Make : Duraline / Gemini/ Rex (36+0)

Material and labour protection of U/G cables in trenches with PCC cable protection cover size of 250x150x40 mm laid perpendicular to length of cable class LV flat type-I complete all as specified and directed. (50+0)

Material and labour for providing earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) surrounded with alternate layer of charcoal and salt as directed with top edge of the plate not less than 1.5 mtres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion including earthing pit in PCC 1:3:6 type C-1 & 40mm thick precast RCC cover of size 54x54x5 cm in 1:1.5:3 type A1 reinforced with 8mm dia TMT bar @ 75mm c/c both ways with 02 Nos lifting handles of 12mm dia MS plain bar, GI pipe 20mm dia medium grade with funnels & wire mesh for watering and 15mm dia medium grade GI pipe for earth lead protection etc including necessary excavation and earth work in any type of soil complete all as specified and as directed. Note:- GI lead wire and protection pipe upto 7.5mtr is deemed to be included in the quoted rate. (1+0)

Supply and fix 40 mm dia bore galvanized iron medium grade including all fitting as in cable protection laid in floor or fixed to poles with clamps etc all as specified and directed (6+0)

Supply only in repairs new genration energy saving and environmental friendly long life versatile pressure die cast aluminium IP-66 with high power road way luminaire NEXUS+ with SPD street light fitting, lamp type 45 W LED 6000 K, deep drawn aluminium pipe mounting attachment complete and connecting with 3 core PVC insulation PVC sheated copper cable of size 1.5 Sqmm from junction box to street light and testing including taking down old unseveceable fitting from existing position complete all as specified and directed Make: CG model No. LSTP-45-CDL, Asymetric optics or equivalent in Bajaj/ Wipro/ Havelles (2+0)

Supply, laying & testing cable XLPE insulated screened PVC beded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Voltes grade LT cable of under mentioned 2 X 6 Sq mm sizes complete all as specified and directed. (50+0)

Supply and fix in repairs sheet metal enclosure MCB SPN distribution board 8 way 240 volt with 200 Amps, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43, IK 09 protection with acrylic door for DX³/ MCB complete all as directed. Make : Legrand Cat No. 507621 or equivalent in L & T/ Siemens (1+0)

Material and labour for fixing of MCB SPN 6-32 Amp, 240 V, 10KA , B curve , RX³ series all as specified. Make: Legarnd cat Part No. 402445 or equivalent in L & T/ Siemens (1+0)

All as per item No 106 above but SP 6-32 Amp. (6+0)

Supply and fix junction boxes (1 to 4 way) with 20 mm dia hole

Dismantling of old steel/concrete pole/strut of any size & length from its root including pole box, wire & brackets & relocating at new site and refixing in suitable PCC foundation with necessary excavation complete all as directed.

Removal/ Dismantling of existing 1.1 KV LT Cable of any size from trench including excavation & removing of PCC cover and kept in safe custody for relaying complete all as specified and directed.

Relaying of 1.1 KV LT cable of any size in trench complete all as specified and directed.

Note:- The amount of schedule of credit on page No. 38 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for accptance.

M/S PRAMOD SURESHCHANDRA AHER