Construction of New 11 KV Feeders for Separation of Agriculture Consumers and Associated Works - Ghaziabad Zone (Ghaziabad District)

Total Schedule No. 1 - Supply of Plants Currency INR (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency USD (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency JPY (BoQ2)

Total Schedule No. 1 - Supply of Plants Currency EUR (BoQ2)

Total Schedule No. 2 - Supply of Plants(Indegenous) (BOQ3)

Total Schedule No. 4A - Incidental Expenses including Inland freight & Insurance to be incurred in Employer’s Country (BOQ4)

Total Schedule No.4B - Civil works (BOQ5)

Total Schedule No.4C - (INSTALLATION SERVICES ) (BOQ6)

Description of Work / Item(s)

Sch-A1 - 250 Km of 11 KV Line on 8.5 m PCC pole with rabbit conductor - Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

PCC Pole 9 Mtrs. Long

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Polymer Disc Insulator T&C type 45KN c/w Disc fittings

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Aluminium jointing sleeves

PG Clamps for ACSR Rabbit/Weasel

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Aluminium binding wire-6 SWG

62.5 kM of Guarding for 11 kV line: Following items as per Schedule Annex-07 ;

Guarding angle 75x75x6 mm,1600 mm long with holding clamp, N&B etc. (16 Nos / km of guarding)

G.I. Wire No. 6 SWG (330 Kg / km of guarding - along the span - )

G.I. Wire No. 8 SWG (110 Kg / km of guarding - across the span )

Turn Buckle (8 nos / km of guarding)

Eye Bolt (8 nos / km of guarding)

GI Binding Wire 16 SWG (1 Kg / km of guarding)

25 No.s of Extra guarding for Road crossing/ communication Llnes /11kv line crossing on 13 Mtr. STP (1 No = 50m span)- Following items as per Schedule Annex-11 ;

Single support 13 Mtr. STP (SP-72)

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

X-Arm holding Clamp (Back Clamp) with bolts & nuts

11 KV Composite Polymer Pin Insulator with Nut and washers

GI. guarding Angle Iron 75x75x6 mm 3010 mm long

`F' Bracket

Turn buckle

G.I. Wire 6 SWG along the span (For 50 Mtr. line)

G.I. Wire No. 8 SWG across the span (For 50 Mtr. line)

G.I. Wire No. 16 SWG for binding

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Armour rod with ferrules for ACSR Dog/Raccoon Helical Performed

Stone Pad (300x300x75 mm)

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Red Oxide paint

Aluminium Paint

Aluminium binding wire-6 SWG

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Pre fabricated Steel items for 11 kV line including MS B&N and Clamps ;

11KV `V' type Cross arm 65x65x6 mm, M.S. Angle

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6 - 1300 mm

GI Angle Iron 65x65x6 mm,2700 mm long bracing with 4 clamp

X-Arm holding Clamp (Back Clamp) with bolts & nuts

`F' Bracket

`E' Bracket

Sch- A2 - 9 kM of 11 KV New Line on 8.5 m PCC pole with AB Cable (3*120 sq mm) Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

11 KV 3x120 sq. mm AB Cable (with bare messenger wire)

HT Suspension Clamp

Channel 125x65x6mm (500 mm long) with back clamp

Bracing angle 65x65x6,450 mm

Pole Clamps

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB cable

Mid Span Jointing Sleeves (120 sq. mm)

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Straight through jointing kit (all size)

Alluminium jointing sleeves

GI Nut and Bolts (all Sizes for HT ABC line)

MS earthing rod of 20x2500 mm. with accessories and 6 SWG earthing wire for pole earthing

Sch-A3 - 6 kM of 11 KV New UG Line with 3x185 Sq. mm. XLPE cable double circuit Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 30 No.s of Sectional Double Pole with 11 m STP (5 Noss per km) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Sch A4 - 3 Nos of 11 KV line at Railway Crossing with 3x185 sq. mm. XLPE cable double circuit 150 m Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 6 Nos. of Sectional Double Pole with 11 m STP (2 Nos per crossing) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Sch-A5 - 21 No.s of New 11 KV Feeder at substation Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV Outgoing VCB indoor type with CTR 400/200/5A 350 MVA (Compatible with existing VCB at 33/11 KV Sub-station )

Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel)

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

Heat Shrinkable jointing kit suitable for 11 KV XLPE 3x185 sq. mm cable size (indoor)

Annex-08 - Following items for 11 KV Feeder Double Pole structure on 11 KV STP (01 No / Fdr) :

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

PG Clamps for ACSR Rabbit/Weasel

`E' Bracket

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

GI Channel 125x65x2028 mm long

Holding clamps for top channel & Fuse set etc. with bolts & nuts

11 KV TPMO

11 kV Fuse Set

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

G.I. pipe 50 mm dia

GI Strip 25x3 mm for earthing

Sch B-1 - 20 kM of 3 phase 4 wire LT Line ACSR Rabbit conductor on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

LT Clamp with N & B for PCC Pole with Neutral

LT Shakle Insulator 100x115 mm

Bolts and nuts for shackle insulators

Loop Guard complete, 3-Phase

Aluminium jointing sleeves

Aluminium binding wire-6 SWG

Earth wire clamp

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Sch B-2 - 10 kM of LT Line ABC Cable (3*95+1*70+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (95 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x95+1x70+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch-B3 - 10 kM of LT Line ABC Cable (3*50+1*35+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (50 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x50+1x35+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch - C1 - 118 No.s of 100 KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 100 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for channel with N&B

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 200 A, 4 Pole ,MCCB for 3 ph, 100 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x150/70 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 150 sq.mm.

Al. crimping lugs 70 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch - C2 - 111 No.s of 63 KVA, 11/0.433 KV Distribution Transformer Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 63 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 150 A, 4 Pole ,MCCB for 3 ph, 63 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch-C3 - 66 No.s of 25KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 25 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 70 A, 4 Pole ,MCCB for 3 ph, 25 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Description of Work / Item(s)

Amount

Sch-A1 - 250 Km of 11 KV Line on 8.5 m PCC pole with rabbit conductor - Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

PCC Pole 9 Mtrs. Long

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Polymer Disc Insulator T&C type 45KN c/w Disc fittings

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Aluminium jointing sleeves

PG Clamps for ACSR Rabbit/Weasel

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Aluminium binding wire-6 SWG

62.5 kM of Guarding for 11 kV line: Following items as per Schedule Annex-07 ;

Guarding angle 75x75x6 mm,1600 mm long with holding clamp, N&B etc. (16 Nos / km of guarding)

G.I. Wire No. 6 SWG (330 Kg / km of guarding - along the span - )

G.I. Wire No. 8 SWG (110 Kg / km of guarding - across the span )

Turn Buckle (8 nos / km of guarding)

Eye Bolt (8 nos / km of guarding)

GI Binding Wire 16 SWG (1 Kg / km of guarding)

25 No.s of Extra guarding for Road crossing/ communication Llnes /11kv line crossing on 13 Mtr. STP (1 No = 50m span)- Following items as per Schedule Annex-11 ;

Single support 13 Mtr. STP (SP-72)

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

X-Arm holding Clamp (Back Clamp) with bolts & nuts

11 KV Composite Polymer Pin Insulator with Nut and washers

GI. guarding Angle Iron 75x75x6 mm 3010 mm long

`F' Bracket

Turn buckle

G.I. Wire 6 SWG along the span (For 50 Mtr. line)

G.I. Wire No. 8 SWG across the span (For 50 Mtr. line)

G.I. Wire No. 16 SWG for binding

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Armour rod with ferrules for ACSR Dog/Raccoon Helical Performed

Stone Pad (300x300x75 mm)

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Red Oxide paint

Aluminium Paint

Aluminium binding wire-6 SWG

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Pre fabricated Steel items for 11 kV line including MS B&N and Clamps ;

11KV `V' type Cross arm 65x65x6 mm, M.S. Angle

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6 - 1300 mm

GI Angle Iron 65x65x6 mm,2700 mm long bracing with 4 clamp

X-Arm holding Clamp (Back Clamp) with bolts & nuts

`F' Bracket

`E' Bracket

Sch- A2 - 9 kM of 11 KV New Line on 8.5 m PCC pole with AB Cable (3*120 sq mm) Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

11 KV 3x120 sq. mm AB Cable (with bare messenger wire)

HT Suspension Clamp

Channel 125x65x6mm (500 mm long) with back clamp

Bracing angle 65x65x6,450 mm

Pole Clamps

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB cable

Mid Span Jointing Sleeves (120 sq. mm)

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Straight through jointing kit (all size)

Alluminium jointing sleeves

GI Nut and Bolts (all Sizes for HT ABC line)

MS earthing rod of 20x2500 mm. with accessories and 6 SWG earthing wire for pole earthing

Sch-A3 - 6 kM of 11 KV New UG Line with 3x185 Sq. mm. XLPE cable double circuit Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 30 No.s of Sectional Double Pole with 11 m STP (5 Noss per km) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Sch A4 - 3 Nos of 11 KV line at Railway Crossing with 3x185 sq. mm. XLPE cable double circuit 150 m Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 6 Nos. of Sectional Double Pole with 11 m STP (2 Nos per crossing) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Sch-A5 - 21 No.s of New 11 KV Feeder at substation Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV Outgoing VCB indoor type with CTR 400/200/5A 350 MVA (Compatible with existing VCB at 33/11 KV Sub-station )

Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel)

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

Heat Shrinkable jointing kit suitable for 11 KV XLPE 3x185 sq. mm cable size (indoor)

Annex-08 - Following items for 11 KV Feeder Double Pole structure on 11 KV STP (01 No / Fdr) :

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

PG Clamps for ACSR Rabbit/Weasel

`E' Bracket

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

GI Channel 125x65x2028 mm long

Holding clamps for top channel & Fuse set etc. with bolts & nuts

11 KV TPMO

11 kV Fuse Set

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

G.I. pipe 50 mm dia

GI Strip 25x3 mm for earthing

Sch B-1 - 20 kM of 3 phase 4 wire LT Line ACSR Rabbit conductor on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

LT Clamp with N & B for PCC Pole with Neutral

LT Shakle Insulator 100x115 mm

Bolts and nuts for shackle insulators

Loop Guard complete, 3-Phase

Aluminium jointing sleeves

Aluminium binding wire-6 SWG

Earth wire clamp

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Sch B-2 - 10 kM of LT Line ABC Cable (3*95+1*70+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (95 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x95+1x70+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch-B3 - 10 kM of LT Line ABC Cable (3*50+1*35+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (50 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x50+1x35+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch - C1 - 118 No.s of 100 KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 100 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for channel with N&B

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 200 A, 4 Pole ,MCCB for 3 ph, 100 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x150/70 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 150 sq.mm.

Al. crimping lugs 70 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch - C2 - 111 No.s of 63 KVA, 11/0.433 KV Distribution Transformer Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 63 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 150 A, 4 Pole ,MCCB for 3 ph, 63 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch-C3 - 66 No.s of 25KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 25 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 70 A, 4 Pole ,MCCB for 3 ph, 25 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Description of Work / Item(s)

Amount

Sch-A1 - 250 Km of 11 KV Line on 8.5 m PCC pole with rabbit conductor - Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

PCC Pole 9 Mtrs. Long

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Polymer Disc Insulator T&C type 45KN c/w Disc fittings

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Aluminium jointing sleeves

PG Clamps for ACSR Rabbit/Weasel

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Aluminium binding wire-6 SWG

62.5 kM of Guarding for 11 kV line: Following items as per Schedule Annex-07 ;

Guarding angle 75x75x6 mm,1600 mm long with holding clamp, N&B etc. (16 Nos / km of guarding)

G.I. Wire No. 6 SWG (330 Kg / km of guarding - along the span - )

G.I. Wire No. 8 SWG (110 Kg / km of guarding - across the span )

Turn Buckle (8 nos / km of guarding)

Eye Bolt (8 nos / km of guarding)

GI Binding Wire 16 SWG (1 Kg / km of guarding)

25 No.s of Extra guarding for Road crossing/ communication Llnes /11kv line crossing on 13 Mtr. STP (1 No = 50m span)- Following items as per Schedule Annex-11 ;

Single support 13 Mtr. STP (SP-72)

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

X-Arm holding Clamp (Back Clamp) with bolts & nuts

11 KV Composite Polymer Pin Insulator with Nut and washers

GI. guarding Angle Iron 75x75x6 mm 3010 mm long

`F' Bracket

Turn buckle

G.I. Wire 6 SWG along the span (For 50 Mtr. line)

G.I. Wire No. 8 SWG across the span (For 50 Mtr. line)

G.I. Wire No. 16 SWG for binding

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Armour rod with ferrules for ACSR Dog/Raccoon Helical Performed

Stone Pad (300x300x75 mm)

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

G.I Barbed wire

Red Oxide paint

Aluminium Paint

Aluminium binding wire-6 SWG

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Pre fabricated Steel items for 11 kV line including MS B&N and Clamps ;

11KV `V' type Cross arm 65x65x6 mm, M.S. Angle

11KV ' V' type Cross arm 100x50x6 mm, M.S. Channel

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6 - 1300 mm

GI Angle Iron 65x65x6 mm,2700 mm long bracing with 4 clamp

X-Arm holding Clamp (Back Clamp) with bolts & nuts

`F' Bracket

`E' Bracket

Tree cutting compensation @ UPPCL standard rate 998.00 Rs / km (without GST)

Sch- A2 - 9 kM of 11 KV New Line on 8.5 m PCC pole with AB Cable (3*120 sq mm) Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

11 KV 3x120 sq. mm AB Cable (with bare messenger wire)

HT Suspension Clamp

Channel 125x65x6mm (500 mm long) with back clamp

Bracing angle 65x65x6,450 mm

Pole Clamps

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

Heat Shrinkable 1 ph. termination kit outdoor for 11 kV 3x120 Sq. mm. AB cable

Mid Span Jointing Sleeves (120 sq. mm)

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Straight through jointing kit (all size)

Alluminium jointing sleeves

GI Nut and Bolts (all Sizes for HT ABC line)

MS earthing rod of 20x2500 mm. with accessories and 6 SWG earthing wire for pole earthing

Sch-A3 - 6 kM of 11 KV New UG Line with 3x185 Sq. mm. XLPE cable double circuit Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 30 No.s of Sectional Double Pole with 11 m STP (5 Noss per km) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Road Restoration Chages priced at UPPCL standard rate (1123.60 Rs /m) for 500 m per 1 km. (without GST)

Sch A4 - 3 Nos of 11 KV line at Railway Crossing with 3x185 sq. mm. XLPE cable double circuit 150 m Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

G.I. Pipe 6" dia

HDPE pipe 160 mm Dia. for Cable Laying at Road Crossing, etc (for laying by HDD Method)

Cable Route Marker

Annex-08 - Following items for 6 Nos. of Sectional Double Pole with 11 m STP (2 Nos per crossing) :-

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11 kV Polymer Disc Insulator B&S type 70 KN c/w Disc fittings

P.G. Clamp for Dog/Raccoon

SMC Number Plate with clamp, bolts & nuts

11 kV SMC Danger board with clamp with N&B

GI Channel 125x65x2028 mm long

Holding clamps for channel with N&B

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

GI Strip 25x3 mm for earthing

Road Restoration Chages priced at UPPCL standard rate (1123.60 Rs /m) for 100 m per crossing (without GST)

Railway crossing documentation, land charges and approval fee etc. priced at Rs 1000000 per job. (without GST)

Sch-A5 - 21 No.s of New 11 KV Feeder at substation Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11 KV Outgoing VCB indoor type with CTR 400/200/5A 350 MVA (Compatible with existing VCB at 33/11 KV Sub-station )

Rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears (Adopter Panel)

11 KV 3 core Al / XLPE Insulated cable, 3x185 sq. mm

Heat Shrinkable jointing / termination kits outdoor for 11 kV 3x185 Sq. mm. XLPE Cable

Heat Shrinkable jointing kit suitable for 11 KV XLPE 3x185 sq. mm cable size (indoor)

Annex-08 - Following items for 11 KV Feeder Double Pole structure on 11 KV STP (01 No / Fdr) :

S.T.P. IS 410 SP-55 11 Mtr. long.

Top channel 100x50 mm 2240 mm (7.9 kg/M) with clamp, nuts & bolts.

Stone Pad (300x300x75 mm)

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

PG Clamps for ACSR Rabbit/Weasel

`E' Bracket

11 kV SMC Danger board with clamp with N&B

SMC Number Plate with clamp, bolts & nuts

GI Channel 125x65x2028 mm long

Holding clamps for top channel & Fuse set etc. with bolts & nuts

11 KV TPMO

11 kV Fuse Set

11 kV Lightning Arrestor

G.I Barbed wire

Aluminium binding wire-6 SWG

Aluminium Paint

Red Oxide paint

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

G.I. pipe 50 mm dia

GI Strip 25x3 mm for earthing

Sch B-1 - 20 kM of 3 phase 4 wire LT Line ACSR Rabbit conductor on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

ACSR Rabbit Conductor

LT Clamp with N & B for PCC Pole with Neutral

LT Shakle Insulator 100x115 mm

Bolts and nuts for shackle insulators

Loop Guard complete, 3-Phase

Aluminium jointing sleeves

Aluminium binding wire-6 SWG

Earth wire clamp

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Sch B-2 - 10 kM of LT Line ABC Cable (3*95+1*70+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (95 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x95+1x70+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch-B3 - 10 kM of LT Line ABC Cable (3*50+1*35+1*16 sq mm) on 8.5 mtr PCC Pole Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Dead End (Insulated) clamps with I-Hook

Suspension (Insulated) clamps with I-Hook

95/50 sq. mm - 70/35 sq. mm PG Clamp (For line to line to line jumpering & energizing DB neutral)

Pole clamps

LT Insulation Piercing Connectors of 120-50 sq. mm -50-35 sq. mm size for energizing distribution kiosk/box

LT Insulation Piercing connectors (16 sq. mm -16 sq. mm) suitable for street light connection

Mid span jointing sleeves (50 sq. mm)

LT SMC distribution boxes 3 phase on the LT Poles including all clamps & material required for mounting connections & sealing

Insulated ABC of 3x50+1x35+1x16 sq. mm

On/Off swith for street light connections

1x35 mm2 XLPE/PVC insulated AL. cable for energising the distribution boxes/kiosks.

2x6 mm2 XLPE/PVC insulated Al. cable for energising the street light

Sch - C1 - 118 No.s of 100 KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 100 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for channel with N&B

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 200 A, 4 Pole ,MCCB for 3 ph, 100 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x150/70 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 150 sq.mm.

Al. crimping lugs 70 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch - C2 - 111 No.s of 63 KVA, 11/0.433 KV Distribution Transformer Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 63 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 150 A, 4 Pole ,MCCB for 3 ph, 63 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Sch-C3 - 66 No.s of 25KVA, 11/0.433 KV Distribution Transformer S/S Prices for supply of following sub-items relating to this item to be quoted and added to the sub-total provided below ;

11/0.44 kV 25 KVA Transformer (Four Star Rating, Level-II)

8.5 Mtr. Long PCC Pole

Stone Pad (300x300x75 mm)

Top channel 125x65 mm 2240 mm (10.7 kg/M) with clamp, nuts & bolts.

GI Channel 100x50x6, 2028 mm (for Dropper Fuse set)

Holding clamps for top channel & Fuse set etc. with bolts & nuts

GI Angle 75x75x6 mm, 2028 mm long with clamp for T/F base

GI Channel 125x65x6, 1300 mm (Tee-off)

Clamp with nuts & bolts for 1300 mm long MS Channel

11KV Polymer Disc Insulator T&C type 45 KN with fittings

11 KV Composite Polymer Pin Insulator with Nut and washers

11 kV Fuse Set

G.I Barbed wire

11 kV SMC Danger board with clamp with N&B

SMC Distribution box having 70 A, 4 Pole ,MCCB for 3 ph, 25 KVA Transformer

Stay Set ( Galvanised) with 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles,1.8 m long 16 mm dia. Solid GS Stay Rod, & 7/3.15 mm dia. GI stranded wire complete as per technical specification, approved drawings, schedules and scope of work.

Chemical Pipe Earthing (80 mm dia, 3 m long Pipe) as per specification

LT PVC 3.5 x70/35 sqmm Cable

ACSR Weasel conductor for jumpering

MS earthing rod of 20x2500 mm. With accessories and 6 SWG earthing wire for pole earthing

Al. crimping lugs 70 sq.mm.

Al. crimping lugs 35 sq.mm.

Extra for Al. tape , binding wire, jointing sleeves, PG clamps etc.

11 KV TPMO

11 KV Lightning Arrestor

GI Strip 25x3 mm for earthing

Description of Work / Item(s)

Amount

Extension of substation control room building (if required) to provide additional space for new outgoing feeder panel/s. This includes all works indicated in Sch-CW1 in Volume III (Refer notes 1-10). Each extension shall be approximately 36 sqm (6x6 m).

Description of Work / Item(s)

Amount

Sch-A1 - 250 kM of 11 KV Line on 8.5 m PCC pole with rabbit conductor Erection including all works and installation materials as per technical specifications and drawings ;

Route survey and pole spotting for 11kV line

Erection of SINGLE POLE STUCTURE 8.5 m PCC pole including excavation of pits in all type of soil, stone pad & concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accessories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of SINGLE POLE STUCTURE 9 m PCC pole including excavation of pits in all type of soil, stone pad & concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accessories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of SECTION DOUBLE POLE STUCTURE 8.5 m PCC pole including excavation of pits in all type of soil, stone pad & concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of SECTION SINGLE POLE STUCTURE 8.5 m PCC pole including excavation of pits in all type of soil, stone pad & concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accessories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of T-OFF POLE STUCTURE on existing & installed single pole structure with 8.5 m PCC pole including fixing of all materials including MS galvanised fabricated items, insulators, clamps & other accessories as per technical specifications & drawings (excluding installation of 8.5 m PCC pole)

Stringing of 3- ph, 3-wire, 11 kV line with ACSR Rabbit conductor as per specification and drawings including all activities and installation materials including stringing of conductor at proper tension/ sag, binding of conductor with insulators, mid span jointing, jumpering etc. complete in all respect

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Provision of Guarding for 11 kV line including installation of all materials as per Schdule Annex-07

Installation of Extra guarding for Road crossing/ Communication Lines /11kv line crossing including erection of 13 Mtr. STP and installation of all materials as per Schedule Annex-11.

Sch- A2 - 9 kM of 11 KV New Line on 8.5 m PCC pole with AB Cable (3*120 sq mm) Erection including all works and installation materials as per technical specifications and drawings ;

Route survey and pole spotting for 11kV line

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Stringing of three Phase 11 KV 3x120 sq. mm AB Cable (with bare messenger wire) including all accessories and installation materials including stringing of conductor at proper tension/ sag, mid-span joints etc. and connection to overhead lines as per specifications and approved drawings complete in all respect

Termination of 11 kV 3x120 Sq. mm. AB cable using outdoor type 1-ph heat shrinkable termination kit

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch-A3 - 6 kM of 11 KV New UG Line with 3x185 Sq. mm. XLPE cable double circuit Erection including all works and installation materials as per technical specifications and drawings ;

Laying of HDD pipe at Road Crossing by HDD Method.

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 sq. mm. in double ckt including cost of bricks, sand, clamps, etc.

Laying of 3x185 Sq. mm. 11 KV XLPE insulated cable underground in trenches OR HDPE Pipe

Drilling & laying of Cable using HDD method without using HDPE Pipe.

Joining / termination of 11 kV 3x185 Sq. mm. XLPE Cable using outdoor heat shrinkable jointing / termination kits

Erection of SECTION /END DOUBLE POLE STUCTURE with ST Pole 11 Mtr. SP-55 including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials including MS galvanised fabricated items, insulators, clamps & other accesories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch A4 - 3 Nos. of 11 KV line at Railway Crossing with 3x185 sq. mm. XLPE cable double circuit 150 m Erection including all works and installation materials as per technical specifications and drawings ;

Laying of 160 mm dia HDPE Pipes underground by HDD Method for laying of 11 kV cables

Digging of trench by excavation of earth, laying of bricks to cover the vable and filling of sand & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 sq. mm. in double ckt including cost of bricks, sand, clamps, etc.

Laying of 3x185 Sq. mm. 11 KV XLPE insulated cable underground in trenches OR HDPE Pipe

Termination of 11 KV XLPE 3x185 sq. mm cable with heat shrinkable termination kit (outdoor) at double pole structure

Erection of SECTION /END DOUBLE POLE STUCTURE with ST Pole 11 Mtr. SP-55 including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials including MS galvanised fabricated items, insulators, clamps & other accesories, danger plate & anti-climbing device etc. as per technical specifications & drawings

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch-A5 - 21 No.s of New 11 KV Feeder at substation Erection including all works and installation materials as per technical specifications and drawings ;

Installation testing and commissioning of 11 KV Outgoing VCB indoor type with CTR 400/200/5A 350 MVA (Compatible with existing VCB at 33/11 KV Sub-station ) including rearrangement for connecting New 11 KV Switchgear with existing 11 KV Switchgears

Laying of 11 KV 3x185 sqmm XLPE Insulated cable underground including cost of sand & bricks as per specifications and drawings

Erection of 11 kV FEEDER DOUBLE POLE STUCTURE with ST Pole 11 Mtr. SP-55 including excavation of pits in all type of soil, stone pad, concreting and fixing & installation of all materials and equipment including MS galvanised fabricated items, insulators, clamps & other accesories, danger and number plates & anti-climbing devices, 11 kV fuse set, 11 kV Lightning Arrestors, 11 kV TPMO as per technical specifications & drawings

Termination of 11 KV XLPE 3x185 sq. mm cable with heat shrinkable termination kit (outdoor) at double pole structure

Termination of 11 KV XLPE 3x185 sqmm cable with heat shrinkable termination kit (indoor) at substation switchgear room

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch B-1 - 20 kM of 3 phase 4 wire LT Line ACSR Rabbit conductor on 8.5 mtr PCC Pole Erection including all works and installation materials as per technical specifications and drawings ;

Route survey and pole spotting for 11kV line

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Stringing of 3- ph, 4-wire, LT kV line with ACSR Rabbit conductor as per specification and drawings including all activities and installation materials including stringing of conductor at proper tension/ sag, binding of conductor with insulators, mid span jointing, jumpering etc. and re-connection of any existing services, complete in all respect

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch B-2 - 10 kM of LT Line ABC Cable (3*95+1*70+1*16 sq mm) on 8.5 mtr PCC Pole Erection including all works and installation materials as per technical specifications and drawings ;

Route survey and pole spotting for 11kV line

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Stringing of three Phase LT Aerial Bunched Cable (3*95+1*70+1*16 sq mm) with bare messenger wire including all accessories and installation materials including stringing of conductor at proper tension/ sag, mid-span joints etc. as per approved drawings.

Fixing of LT distribution boxes/kiosk, 3 phase on the LT Poles including installation of all clamps, sealing & cables and connection to ABC lines via IPC and connection of any existing services to the box

Connection of street lights to AB cable via IPC including connection of cables and installation of ON/OFF switches

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch-B3 - 10 KM of LT Line ABC Cable (3*50+1*35+1*16 sq mm) on 8.5 mtr PCC Pole Erection including all works and installation materials as per technical specifications and drawings ;

Route survey and pole spotting for 11kV line

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Stringing of three Phase LT Aerial Bunched Cable (3*50+1*35+1*16 sq mm) with bare messenger wire including all accessories and installation materials including stringing of conductor at proper tension/ sag, mid-span joints etc. as per approved drawings.

Fixing of LT distribution boxes/kiosk, 3 phase on the LT Poles including installation of all clamps, sealing & cables and connection to ABC lines via IPC and connection of any existing services to the box

Connection of street lights to AB cable via IPC including connection of cables and installation of ON/OFF switches

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Sch - C1 - 118 Nos. of 100 KVA, 11/0.433 KV Distribution Transformer S/S Erection including all works and installation materials as per technical specifications and drawings ;

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Installation of 3-Phase 11/0.44 kV, 100 kVA Distribution Transformer alongwith all associated equipment & accessories. This includes fixing of MS galavanised items, LA, 11 kV fuse set, TPMO, LT Distribution Board , danger board, cables, anticlimbing device and making all connections to make the DT ready in all respect as per specifications and drawings.

Pipe Earthing using GI pipe (80 mm dia, 3 m long ), installation of GI Strips, Chemical bonding and treating with charcoal & salt to obtin required earth resistance as per specifications and approved drawings.

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Sch - C2 - 111 Nos. of 63 KVA, 11/0.433 KV Distribution Transformer Erection including all works and installation materials as per technical specifications and drawings ;

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Installation of 3-Phase 11/0.44 kV, 63 kVA Distribution Transformer alongwith all associated equipment & accessories. This includes fixing of MS galavanised items, LA, 11 kV fuse set, TPMO, LT Distribution Board , danger board, cables, anticlimbing device and making all connections to make the DT ready in all respect as per specifications and drawings.

Pipe Earthing using GI pipe (80 mm dia, 3 m long ), installation of GI Strips, Chemical bonding and treating with charcoal & salt to obtin required earth resistance as per specifications and approved drawings.

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

Sch-C3 - 66 Nos. of 25KVA, 11/0.433 KV Distribution Transformer S/S Erection including all works and installation materials as per technical specifications and drawings ;

Erection of 8.5 m PCC pole including excavation of pits in all type of soil, stone pad, concreting and fixing of all materials (fully dressed) including MS galvanised fabricated items, insulators, clamps & other accesories etc. as per technical specifications & drawings.

Earthing of pole as per specification and drawing including installation of MS earthing rod of 20x2500 mm with all accessories and 6 SWG earthing wire.

Installation of 3-Phase 11/0.44 kV, 25 kVA Distribution Transformer alongwith all associated equipment & accessories. This includes fixing of MS galavanised items, LA, 11 kV fuse set, TPMO, LT Distribution Board , danger board, cables, anticlimbing device and making all connections to make the DT ready in all respect as per specifications and drawings.

Pipe Earthing using GI pipe (80 mm dia, 3 m long ), installation of GI Strips, Chemical bonding and treating with charcoal & salt to obtin required earth resistance as per specifications and approved drawings.

Erection of complete Stay Set with GI stay wire including excavation of stay pit, concreting, installation of all accesories including 50x8 mm stay clamp, stay insulator, anchor plate (200x200x6), nut bolts, turn buckles, 1.8 m long 16 mm dia. Solid GS Stay Rod & 7/3.15 mm dia. GI stranded wire complete as per technical specifications and approved drawings.

MAYASHEEL CONSTRUCTION

Jakson Limited

Gupta Power Infrastructure Limited

RP INFRAPOWER PRIVATE LIMITED

Fabrico India Pvt. Ltd,

VIKRAN Engineering and Exim Pvt Ltd

TATA Projects Limited

Feedback energy distribution company ltd.

Jakson Limited

MAYASHEEL CONSTRUCTION

Fabrico India Pvt. Ltd,

Gupta Power Infrastructure Limited

Feedback energy distribution company ltd.

VIKRAN Engineering and Exim Pvt Ltd

TATA Projects Limited

STERLING AND WILSON PRIVATE LIMITED

Jakson Limited

Gupta Power Infrastructure Limited

MAYASHEEL CONSTRUCTION

VIKRAN Engineering and Exim Pvt Ltd

TATA Projects Limited

RP INFRAPOWER PRIVATE LIMITED

Feedback energy distribution company ltd.

Fabrico India Pvt. Ltd,

MAYASHEEL CONSTRUCTION

RP INFRAPOWER PRIVATE LIMITED

Gupta Power Infrastructure Limited

VIKRAN Engineering and Exim Pvt Ltd

STERLING AND WILSON PRIVATE LIMITED

Fabrico India Pvt. Ltd,

TATA Projects Limited

Feedback energy distribution company ltd.

Gupta Power Infrastructure Limited

Jakson Limited

STERLING AND WILSON PRIVATE LIMITED

Fabrico India Pvt. Ltd,

MAYASHEEL CONSTRUCTION

VIKRAN Engineering and Exim Pvt Ltd

TATA Projects Limited

Feedback energy distribution company ltd.

Fabrico India Pvt. Ltd,

RP INFRAPOWER PRIVATE LIMITED

STERLING AND WILSON PRIVATE LIMITED

Gupta Power Infrastructure Limited

TATA Projects Limited

Feedback energy distribution company ltd.

VIKRAN Engineering and Exim Pvt Ltd

Jakson Limited

US Dollar

European Euro

Japanese yen

US Dollar

European Euro

Japanese yen

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

Japanese yen

Japanese yen

Japanese yen

Japanese yen

Japanese yen

Japanese yen

Japanese yen

Japanese yen

European Euro

European Euro

European Euro

European Euro

European Euro

European Euro

European Euro

European Euro

US Dollar

US Dollar

US Dollar

US Dollar

European Euro

European Euro

US Dollar

European Euro

Japanese yen

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)

A07-X1A (RI-1)

A07-C1A (RI-1)

LTAB01 (RI-1)

LTAB02 (RI-1)

LTAB03 (RI-1)

LTAB04 (RI-1)

LTAB05 (RI-1)

LTAB06 (RI-1)

LTAB08 (RI-1)

LTAB10 (RI-1)

LTAB11 (RI-1)

LTAB12 (RI-1)

A07-C1A (RI-2)