CERTAIN REPAIRS TO CHAIN LINK FENCING, BARBED WIRE FENCING AND OTHER MISC WORKS AT FATEHGARH CANTT

Amount

Dismantling posts or struts ( wood, steel or RCC) any section including taking out embedded position and making good disturbed ground, posts embedded in concrete , brick work, masonary work complete all as specified and directed

Dismantling of galvanized mild steel barbed wire of any description complete all as specified and directed

Dismantling fencing wire mesh any type fixed to angle post complete all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone agg) as in bencing, coping , rounded or chamfered on edges etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 Type C2( using 40mm graded stone aggregate) as in foundation for filling and mass concrete to fixed post or struts in position complete all as specified and directed

M&L Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long etc complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, fixed with chain link fencing including cranking , bending, welding all as required at site complete all as and as directed.

Supply only chain link fencing of mesh of size 75x75mm & 4mm dia mild steel galvanised wire including line wires, binding wire fixed to any type of standards, rails, straining bolts, etc complete all as specified & directed.

Fixing only chain link fencing including line wires ,any mesh and any type of standrads rails ,straining bolts etc including provisioning of binding wire complete all as specified and directed.

S & F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of new surfaces complete all as specified and directed.

Taking down Cement Plaster on brick work or concrete surfaces incl racking out joints etc complete all as specified and directed.

M&L 15mm thick cement plastering in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel section in framed work as in doors or gates of angles or other section with gussset plates ,rails ,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging ,of grade Fe -290 (E-165) complete all as specifeid and direcetd.

M/S WASEEM KHAN CONTRACTOR

M/S S P CONSTRUCTION

M/S Shree Gopal Engineers & Contractor