NAHARANI DOLONI PATHAR WATER HARVESTING CUM WATER DISTRIBUTION PROJECT UNDER RIDF XXX

Amount

A. BRICK CANAL

Site preparation by manual means

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 (Manual method should be adopted where machines can not be deployed due to site condition)

Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412

Providing and laying parapet with PCC M 15 as per drawing & technical specifications Clauses 800 and 1208.4 including curing for 14 days.

Brick Masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and technical specifications.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Plastering with cement mortar (1:3) 15 mm thick on brickwork in parapet as per technical specifications Clauses 613.4 and 1208.4

Carryage of material locally by thella and head load from road side to the project site.

Installation of 4" PVC pipe (Suprime) of 2ft length as outlet to distribute the water to the paddy field including the cost of fitting with the wall.

B. SLUICE GATE

Earth work in excavation of foundation for structures as per drawing & technical specification, including setting out, construction of shoring & bracing, removal of stumps & other deleterious matter, dressing of sides & bottom and backfilling in trenches with approved material.

Sand Filling in Foundation Trenches as per Drawing and Technical Specification

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203.

RCC Works in in sub structure complete as per drawing & technical specification and steel shuttering form work, curing completed as per directed.

Supplying, fitting & placing TMT bar reinforcement in substructure complete as per drawing & technical specifications. TMT-IS 1786 (Fe500 D) Primary Producer (TATA/SAIL/Esser Steel/Jindal panther steel/Shyam steel or equivalent)

Plastering with cement mortar ( 1 : 3 ) on brick work in sub-structure as per technical specifications.

Providing, fitting and fixing of sluice gate of iron plate with 50mm dia. Shaft, handle, lock etc. fixed with RCC post as per direction & specification. (Size of sluice = 0.85m x 0.85m)

Providing RCC Sign Board (minimum size of board is 6' x 4')

PRAJIB DUTTA (BID ID -255533)

BIMAL ENTERPRISE (BID ID -255726)

ARNAB BURAGOHAIN (BID ID -255717)