REPAIR TO JOINERY, FLOORING, PLASTERING, DOOR, WINDOWS, INTERNAL WATER SUPPLY SANITARY FITTING AND ROOFS OF CERTAIN BLDGS AT FAD BHARATPUR

Amount

Dismantling of asbestos cement corrugated sheets in roof covering of any thickness and description complete all as specified and as directed by Engineer-in-Charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezodial profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge

Fixing of pre- painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezodial profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws but except sheets complete all as specified and as directed by Engineer-in-Charge Note :- Pre-painted galvalume aluminum sheets re-used, obtained from ser item No 1 above.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type of 'J' type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge.

Fixing of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' type of 'J' type or cranked hook bolts but except sheets complete all as specified and as directed by Engineer-in-Charge. Note :- Asbestos cement corrugated sheets reused, obtained from ser item No 1 above.

M&L 6mm thick asbestos cement, serrated ridge for corrugated or semi corugated sheets in roofs fixed with 'L' type of 'J' type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E-250) quality A complete all as specified and as directed by Engineer-in-Charge.

S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed by Engineer-in-Charge.

Dismantling of posts or struts (wood, steel or RCC) embedded in concrete/brick work of any section, including taking out embedded portion and making good disturbed ground.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge..

M&L 4 mm thick high pressure steam cured non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete. (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed by Engineer-in-Charge..

S&F anodised aluminium snap grid frame work for false ceiling suspended and fixed with 2 mm dia ms wire complete all as specified and as directed by Engineer-in-Charge.

S&F for PVC wall panelling with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF-146 or equivalent, fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/window/opnings etc to be covered with PVC angle fixed with solvent cement complete all as specified as manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge.

M & L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 metre mean radius as wall built in cement & sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.

Rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Rendering 10 mm thick in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair complete all as specified and as directed by Engineer-in-Charge. (Note :- water proofing compound shall be measured and paid separately under appropriate item of this schedule)

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, over wall Surface including all necessary arrangement for execution of work Make NEROLAC/DULUX/BERGER.

Preparation of new plastered/ un-plastered surface of wall including cornices, pilasters etc and applying two coat of cement based paint using hand roller, over one coat of water based white pigmented alkali resistant priming paint conforming to IS:109-1968, of approved colour/camouflaging pattern complete all as specified and as directed by Engineer-in-Charge.Make NEROLAC/DULUX/BERGER

Demolition of cement concrete (un-reinforced) in ground floors and pavings laid in any description and any position n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the remises complete all as specified and as directed by Engineer-in-Charge.

25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base, laid and finishing surface of concrete topping even and rough to receving of screed for tiling complete all as specified and as directed by Engineer-in -Charge.

M&L for 18 to 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in cookin platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

20-25 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

15 mm thick machine cut kota stone slabas on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of marble over and including laid over 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive wall, tiles complete all as specified and as directed by Engineer-in-Charge.

Sheet glass clad polycorbonate 60.30 mm thick bullet/blast - resistant, manufacture's certified protection level UL 752 Level 8 (05 Shot) and glazing with oil putty in squares not exceeding 0.5 Sqm each all as specified in particular specifications. Make : M/s Thermosol Glass India (Pvt) Ltd, Natural Bullet Proof Glass, SK TUFF Transparent Bullet Proof Glass or equivelent.

M&L Vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 Complete all as specified

M&L coloured joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the floor laid over and including 15 mm thick screed bed in CM 1:6 Complete all as specified

Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 liters including taking down old ball valves complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks of capacity exceeding 250 and not exceeding 500 liters including taking down old ball valves complete all as specified and as directed by Engineer-in-Charge.

S&F Rotational moulded polyethylene water storage tanks, white with treaded type cover lid of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge.(Notes: (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water.(ii) The tanks shall be with two layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I.(iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “D”.)

All as per Seiral item No 37 here in before but capacity 1000 Litres complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

M&L disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 250 ltr but not exc 500 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 250 lts but not exc 500 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed by Engineer-in-Charge.

M&L disconnectiong existing tanks, setting aside (or lowering ir required) for repairs, cleaning etc and hoisting if required re-connecting and re-fixing in position of capacity exc. 500 ltr but not exc 1000 ltr (cleaning repairing etc measured and paid separately) complete all as specified and as directed by Engineer-in-Charge.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters and refixing in the same opening, of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description n exc 1 sqm each.

Labour only for Resecuring or easing & adjusting, without taking down of shutters of any description exc 1 sqm and n exc 2 sqm each.

M & L for powder coated anodised aluminium framed for doors, windows, ventilators with one or more rebates including aluminium channels for sliding shutters, jointing cleats for fixing etc complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised Aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, rubber neoprene packing as per peg stay 150 mm long (1 No) suitable , type B-21 hinge 100mm long (2 No), handle (1 No) etc each leaf complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised Aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 02 Nos aluminium handle each door, hinges, beading clips etc complete all as specified and directed by Engineer-in-Charge.

S&F aluminium grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.

S&f for 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,odinary qulity and glazing with neosprene beading exc 0.5 Sqm in each pane

S&F Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 410-W (Gde-E-250) quality -A) complete all as specified and as directed by Engineer-in-Charge.

35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

35 mm thick, IInd class hard wood (Bonsum/Hollock), glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed scres, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required.

S&F for 0.56 mm thick aluminium alloy sheeting fixed with screw on door shutter complete all as specified and as directed by Engineer-in-Charge.

S & F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with 2 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face in the frame at site, as per specifications and drawing.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube etc complete.

S & F of Butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200 mm long complete all as specified and as directed by Engineer-in-Charge.

S&F MS sliding door bolt, plate type, stove enamelled, black with bright bolt not less than 12mm dia, length of bolt 300 mm, including a minimum of 6 bolts, nuts and washers, four on bolt plate and two on staple plate complete all as specified and as directed by Engineer-in-Charge.

Mild steel pressed handles, 150 mm long, oval type, stove enamelled, black, ISI marked complete all as specified and as directed by Engineer-in-Charge

S & F of Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium, anodised, 150mm long barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium, anodised handle 100mm size cast type anodised complete all as specified and directed.

Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body) suitable for door shutters of 851 to 1000 mm in width and of weght between 61 to 80 kg and fixed complete all as specified and directed.

S&F in replacement Factory made steel windows with side hung shutters including box type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including with one shop coat of red oxide Zinc-Chromate primer complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No 70 here in before but Without Glazing bar, complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made Steel ventilator, ISI marked, with top hung shutters including hinges and steel peg stay complete including making good disturbed surfaces of walls, complete all as specified. Note:-Steel ventilators shall confirm with IS-1038-1983 (Note for srl item No 70 to 72 here-in-above :- (a) Steel windows/ventilator shall be of sizes to suit the size of opening at site and as ordered/directed by GE. (b) Steel windows /ventilator shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘D’. (c) Steel windows/ventilator shall be conforming to IS-1038 and all as specified in these tender documents and MES Schedule Part-I. (d). The lugs of the steel windows/ventilator shall be fixed in P.C.C. blocks made of PCC 1:3:6 type C-2 using 40mm graded stone aggregate. Size of PCC blocks shall be 23cm x 10 cm x 15 cm. (e) Cost of providing all the above aspects including the cost of lugs & P.C.C. blocks shall be deemed to be included in unit rate quoted for above item. Cost of making good the jambs to match with the adjoining surfaces shall be deemed to be included in the rates quoted for taking down items.

S & F window guard bars, plain and fixed independently in steel window frames, conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or from metal frame or stone or concrete or bricks surrounds glazesd with putty, taking out old pins punching or drilling out, complete all as specified and as directed by Engineer-in-Charge.

S & F Sheet glass 4 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including provision of glazing pins/spring clips, complete all as specified and as directed by Engineer-in-Charge.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. (Note: Cost of supplying wooden beads/ MS flat (as applicable) for fixing wire gauze in panels shall be deemed to be included in respective items of joinery /steel windows. However, fixing wire gauze with beads/ flat supplied with joinery/ steel window shall be deemed to be included in this item and nothing extra shall be admissible on this account.)

Ditto all as per Srl Item No 76 here in before but fixed in repair complete all as specified and as directed by Engineer-in-Charge.

Painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with pink primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to old wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces,finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to new primed steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to new steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Painting to old steel or steel based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge.

Refixing old steel GI tubing and connections in new or old position with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge.

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs tower bolt Aluminum anodised of 200 mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair mild steel sliding bolt of any description and type of size 300mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair mild steel sliding bolt of any description and type of size 600mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MS butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Aluminium anodised with galvanised mild steel hinge pin butt hinges of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S & F repair 150mm mild steel (Helical door spring) ordinary spring including with necessary welding work complete all as specified and as directed by Engineer-in-Charge.

Repairing of existing aluminium door single leaf exc 1.00 Sqm but n exc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item).

Ditto all as per Srl item No 97 above but door shutter but n exc 1.00 sqm complete all as specified and as directed by Engineer-in-Charge.

Supply Only neosprene rubber beading suitable for aluminium door / window panels complete all as specified and as directed by Engineer-in-Charge.

Supply Only Aluminium alloy Hinges 100 mm complete all as specified and as directed by Engineer-in-Charge.

Supply only 125 mm Aluminium alloy Handle complete all as specified and as directed by Engineer-in-Charge.

S&F EPDM rubber strip of width 2 cm suitable for 1mm to 2 mm gap , fixed with adhesive like Fevicol pasting alongwith blue tag type nails complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters

S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed by Engineer-in-Charge.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge.

M&L for electric welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded n exc 6mm thick complete all as specified and as directed by Engineer-in-Charge.

M&L for electric welding in repairs exc 2.5 cm but n exc 5.0 cm in length over metal to be welded exc 9mm but n exc 20 mm thick complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Bib tap, cast copper alloy Chromium Plated fancy type/ long body with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement 15 mm bore stop angle valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

S&F in replacement 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

S&F in replacement 25 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.

Supply only liquid water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge

Supply & Fix stainless steel hollow section (square/rectengular), electro-polished with identy mark including cutting, jointing, bending, welding as per manufacturer instructions, surface of welded to be done with brush finish complete all as specified and directed by Engr-in-Charge. Make - TATA structure or equivalent.

Supply & Fix 18 to 19 mm thick prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber/metal frame work.

S&F for external teak wood lipping 6mm thick and 18/19mm wide, fixed with nails complete all as specified and directed.

Pioneer Enterprises