Water_Body_JUAN_disttSPT

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. HSR Item No 4.1

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m : All kind of soil HSR Item No 4.9.1

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil HSR Item No 4.12.1

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits, wall trenches basement excavation, top surface of plinth filling junction of wall and floor alongwith the external perimetre of building, expansion joints surrounding of pipes and conduite etc. complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/Lindane Embulsiflable concentrate of 20% HSR Item No 4.39 (a)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in - charge. In cement mortar HSR Item No 5.7.4

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 m lead as per direction of Enginner - in - charge. Nominal concrete 1:2:4 or leaner mix (i/c equivalent cum design mix) HSR Item No 5.23.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) HSR Item No 6.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size) HSR Item No 6.1.4

Providing & Laying damp proof couse with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone -III) : 4 graded stone aggregate 12.5mm nominal size . 40mm thick. HSR Item No 6.8.2

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for sqm mass concrete HSR Item No 6.30.1

Centering and shuttering including strutting, propping etc. and removal of form for :Walls ( any thickness) including attached pilasters, buttresses, plinth and string courses etc. HSR Item No 6.30.2

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landlings, balconies and HSR Item No 6.30.3

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers HSR Item No 6.30.5

Providing & laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelertae, retard setting of concrete, improve workability without imparing strength and durability as per direction of Engineer - in -charge ( Note : Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). All works up to Plinth level HSR Item No 6.25.1

Providing & laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelertae, retard setting of concrete, improve workability without imparing strength and durability as per direction of Engineer - in -charge ( Note : Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). All works above Plinth level up to floor IV level HSR Item No 6.25.2

Extra for providing richer mixes up to plinth and at all floor levels. (Note : - less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix). Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) HSR Item No 6.25.1

Steel reinforcement for RCC work, where no included in the complete rate of RCC including straightening, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays. Hangers and annealed steel wire etc. and placing in position complete in all respects below plinth level. Note : Reinfocement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and anealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in rates for reinforcement. Thermo- Mechanically Treated bars of grade Fe- 500D or more. HSR Item No 6.34.6

Providing, hoisting and fixing above plinth level upto floor four level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone III) : 3 graded stone aggregate 20mm niminal size) HSR Item No 6.43

Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) HSR Item No 7.21.1 (A&C issued slip )

Brickwork with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Item No 7.22.1

Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level upto florr IV level. Cement mortar 1:4 (1 cement : 4 coarse sand) HSR Item No 7.28.2

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes, 110mm diameter HSR Item No 9.57.2

Providing and fixing vitrified tiles in floor with different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved brand and manufactacturer , in all colours & shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS :15477, in average 6mm thickness, including frouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600 X 600mm HSR Item No 10.71.2

Providing and fixing vitrified tiles in different sizs (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments tc. complete. Size of Tile 600 X 600 mm HSR Item No 10.67.2

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in- charge. HSR Item No 10.76

12 mm cement plaster of mix : 1:4 ( 1 cement : 4 fine sand) HSR Item No 11.5.3

Providing and applying 12mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - I & II) 1976, applied on hacked/ uneven background such as bare brick/ RCC work on walls & ceiling at all floors and location, finished in smooth line and level etc. complete. HSR Item No 11.46

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. HSR Item No 11.63

For Outer : Finishing walls with Acrylic smooth exterior oaint of required shade : New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) HSR Item No 11.95.1

Providing and fixing wooden handrail of required shape and design, with necessary screws, including labour, for rounding, vertical and horizontal bends and curves complete fixed in position. commercial hard wood such as hollock, champ, chikrassy and chaplash etc. (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned) HSR Item No 12.113.2

25 mm thick PVC flush door shutters made out of a one piece multi chamber extruded PVC section of size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± .3 mm). PVC foam end cap of size 23 X 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. MS tube having dimensions 19 mm X 19mm and 1.0 mm (± .1 mm) is inserted along the hinges side of the door. core of the door shutter should be filled with high density Polyurethane foam. The top & bottom edges of the shutter are covered with an end- cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's speciication and direction of Engineer - in - charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate olaces HSR Item No 12.118.3

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, includinh ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick HSR Item No 12.10.2.2

Providing and fixing panelling or panelling and glazing in panelled or paneeled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneeled and glazed shutters 25 mm to 40 mm thick : Float Glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) HSR Item No 12.9.7.2

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer - in - charge . (Note :- Butt hinges and necessary screws shall be paid separately ) Kiln seasoned and chemically treated Hollock wood. 35 mm thick shutters HSR Item No 12.7.2.1

Providing and fixing aluminium sliding door bolt , ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868), transparent or dyed to required color or shade, with nuts and screws etc. complete: Size 300 mm X 16 mm HSR Item No 12.98.1

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade with nuts and screws etc. complete HSR Item No 12.98.2

Providing aluminium jali of thickness 7mm thick with opening - 75mm X 75mm of including anodizing and fixing in frame with cost of screws etc. complete. HSR Item No 12.107

Steel work welded in built up section/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. HSR Item No 13.29.2

Double layer tile lining for water storage tanks, consisting of (i) 10mm thick cement plaster 1:5 in sub- grade (ii) first layer of 3.81 cm thick tiles of 22.86 cm X 11.43 cm laid in 1:5 cement mortar as mentained above (iii) sand- wiched plaster 1:3 cement 15mm thick. (iv) second layer of tiles laid in 1:3 cement mortar, with 6mm mortar over sand - wiched plaster including cost of dressing sub grade scaffolding and curing etc,. complete in all respect - In Bed HSR Item No 14.27.1

Excavation trenches of required width for pipes, cables, etc including excavation for socket and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavation soil and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc and disposing of surplus excavation soil as derected within a lead of 50 m. pipes cables etc. exceeding 80 mm metre dia. but not exceeding 300 mm dia. HSR item no.4.16.1.2

Water bound Macadam Grading I (without screenings for low volume roads (underdesignated)) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in unifrom thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications HSR Item No 17.22.1 @ 910 A&C issued slip No.01 dated 06.08.2021.

Providing and fixing panelling or panelling and glazing in panelled or panelled or glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick : Pre - laminated with decorative lamination on both side exterior Grade - I MDF Board 12mm thick confirming to IS : 14587 HSR Item No 18.10

Providing and fixing 3 layer PP-R (Poly propylene random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded stability for hot & cold water supply, including all PP - R pain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer - in - charge. PN - 16 Pipe, 25mm OD (SDR - 7.4) HSR Item No 18.30.2

Supplying GI pipes class B marked with IS 1239 IN 3.05m length, their threading and welding with flanges on both sides jointing with nuts and bolts rubber gaskets, marked with IS: 638 jointing with pumping machinary and lowering into Tubewells and testing including carriage, loading unloading etc complete in all respect. 50mm I/D HSR Item No 20.54.1

Providing and fixing fabricated PVC ( UNPLASTICISED POLY VINYL CHLORIDE COUPLERS) ( 4Kg./cm2) on PVC Pipes used for potable water supply IS- 4985 : 1988 including cost of adhesive, carriage , loading unloading etc. complete in the respects to the satisfaction of the engineer-in-charge. ( Excavation will be paid Separately) Size 110mm o/d HSR Item No 20.60.2

Providing & fixing DUCTILE IRON DOUBLE SEAL MANHOLE COVERS AND FRAMES OF 610mm X 610mm with locking arrangement on clear water tanks including cost of setting in cement concrete 1:2:4 to correct alignment and levels including carriage , loading , unloading etc. complete in all respects to the satisfaction of the Engineer - in - charge HSR Item No 20.61

Extra for fixing sluice valves/flap vales socketed or flanged including cartage from stores or nearest Railway station to site of works. 300 mm i/d HSR Item No 20.10.6

Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade S&S pipes as per IS: 8329-2000 ( amended upto date), with internal cement mortar lining for potablle water with rubber ring ( EPDM/SBR) joints as per IS: 5382-1985 ( excluding special accessories ) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note : E/W to be measured and paid separaely. 300 mm i/d HSR Item No 20.63.5

Ladder : Providing and fixing steel bar embedded plastic steps of size 263 mm X 165 mm of orange colour, conforming to specifications, in pump chamber, manholes etc., having minimum 3 mm thick polypropylene ploymer confirming to IS : 10910 encapsulated on 12 mm dia ribbed steel bars per IS: 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1:2:4 cement concrete including carriage, loading, unloading, stacking, handling, re- handling etc. complete in all respect to the satisfaction of Engineer - in - charge HSR Item No 21.28

Providing and fixing white vitreous chinaware pedestal type water closet ( Eupropean type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cristern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C pan with ISI marked white solid plastic seat and lid HSR Item No 22.23.1

Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with flushing cristern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10 litre white P.V.C automatic flushing cristern HSR Item No 22.25.4

Providing and fixing square- mouth S.W. gully trap class Sp- 1 complete with C.I. grating brick masonary chamber with water tight C.I cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100 X 100 mm size P type. with sewer bricks conforming to IS : 4885 HSR Item No 22.166.1.2

Providing & fixing 40mm i/d chromium plated brass trap with chromium plated brass pipe to wall with wall flange, complete for use with sinks. With C.P. Brass 'P' or 'S' Trap HSR Item No 22.17.2

Providing and fixing Brass Bib cock of approved quality. 15mm nominal bore HSR Item No 22.96.1

Providing and fixing brass bin cock of approved quality : 20 mm nominal bore HSR Item No 22.96.2

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 453 x 357 mm HSR Item No 22.210.2

Providing and fixing in position vitreous chinaware white lavatory suites of approved make ( to the approval of Engineer - in - charge) including Rack Bolt screw pair 115 mm long without CP fittings complete in all respect. Size 630 mm X 500mm (above counter oval) HSR Item No 22.221.8

Providing and placing on terrace (at all flooor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 litre capacity HSR Item No 22.181

Wiring for light/Fan/call bell point with modular type switch/socket and Gibox, modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6mm thick PVC conduit pipe. Group A HSR Item No 23.4.1.1

Supply and erection of modular case circuit breaker single pole/ 4 pole on existing wall / pedestal / Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer - in - charge of the work. Double pole MCCB 16 to 63 amp, 25 Ka HSR Item No 23.22.1.1

Erection of exhaust fan in existing opening, complete with necessary earthing of fan including carriage from PWD store to the site of work. HSR Item No 23.9

Supplying at site good earth /soil-less media and/ or organic matter, preparation of top dressing mixture or pot media: Supplying at site of work well decayed farm-yard manure from any available source, approved by the Engineer-incharge including screening through sieve of I.S.designation 16 mm with 5 km lead and supply of good earth making mixture in ratio of 1:2 HSR Item No 26.3.1

Supplying at site good earth /soil-less media and/ or organic matter, preparation of top dressing mixture or pot media: Spreading of sludge, farm-yard manure or/and good earth in required thickness (Cost of sludge, farm-yard manure or/and good earth to be paid for separately) HSR Item No 26.3.6

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) : Hole 1.2 metre dia and 1.2 metre deep HSR Item No 26.13.1

Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) : Hole 0.60 metre dia and 0.6 metre deep HSR Item No 26.13.4

MS circular tree guard with wire mesh, having 4 No. legs each of angle iron size 25x25x3mm, 1.80 metre. height, 3 No rings of M.S Flats of 25 x 6 mm, 60cm dia and fixing of wire mesh size 50x75mm. Tree guard in two halves bolted together with 8mm dia & 30 mm long bolts, and fixing 250 mm X 100 mm iron plate, fixed in ground with 1 :2:4 cement concrete, complete in all respects. Minimum weight should be 23 kgs HSR Item No 26.63.2

Providing and laying four coarses of water proofing treatment with bitumin felt over roofs consisting of first and third course of blown type bitumin grade 85/25 or 90/15 conforming to IS : 702 applied hot at 1.45 kg/ sqm for each coarse and second coarse of roofing felt type 3 grade- I (hessian based self finished bitumin felt ) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square meter, including preparation of surface but excluding grading complete with : Bitumen felt ( hessian base) type 3 grade I conforming to IS :1322 HSR Item No 28.1.1

G.I Barbed wire fencing 1.2 meter high Providing and fixing 1.2 metres high GI barbed wire fencing, with 1.8 metres angle iron pasts 40 mm X 6mm placed every 3 meters center to centre founded in M15 grade cement concrete, 0.6 meter below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only one provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckeles etc complete as per clause 807 HSR Item No 34.29.1

Stone Boulder 50 mm to 200 mm HSR Item No B2015

C.I. Sluice valve (with caps) class I:300mm dia HSR Item No 22.162.6.1

PVC Bend 100 dia HSR Item No B0239

Demarcation of waterbody revenue record : Juan Waterbody N.S. Item

DWC Double Wall Corrugated High-density polyethylene Pipe of ID 0.3 meter (SN 8 Material Grade) N.S. Item.Providing and fixing. IS-16098(part-II) ISI Marked Pipe.

Water Quality Sensor (Sensor-BOD,COD,TSS, Powerful wireless data logger, metal box, power adaptor, online monitoring subscription 1 yr.) (1 year warranty) N.S. Item. Providing & Fixing.

Water level sensor (1 year warranty) N.S. Item. Providing & Fixing.

Piezometer ( For 30 meter & 60 meter Combined)Piezometer with complete in all respect ( including drilling, uPVC pipe , MS Clamps, PVC End cap ). Piezometer (1a & 1b = 60 & 30 meter length = 1 set) N.S. Item. Providing & Fixing.

DWLR (Telemetric Piezometer (Battery type) along with Data Server and Connectivity. (Online ground water recorder, continues data logging, data transfer to server every 1 hour & uploaded on cloud server, imported pressure transducer, factory calibrated, wall/ pipe mounting, IP 65 grade rated, Battery and 1 time installation) (1 year warranty) N.S. Item

Vetiver grass ( slip Hybrid CIMAP Approved ) N.S. Item. Providing & Fixing.

SIGNAGE for waterbody N.S. Item. Providing & Fixing. Board size 4' X 2' material ACP 3mm thick aluminium plate.

Solar Street Light (Semi Integrated street light details, 30watt led light , Solar module 75 watt poly crystalline, 5 meter GI Tubular pole) (2 year warranty) N.S. Item. Providing & Fixing.

Water Sprinkler 1.5" Size Raingun, Working Pressure: (1.5 to 4)Kg/cm², Water Requirement : (6.5 to 16.5)m³/h, (Make : YUZUAK) N.S. Item. Providing & Fixing.

5 HP Solar Pump for each Sprinkler (Solar module 320Wp, pump controller, GI module structure, Cable, Pipe, Rope, installation including bolt & civil works) (1 year warranty for pump & 25 year for panels) (including 5 year maintenance) (N.S. Item) Providing & Fixing. ISI Mark.

Complete set of Floating aerators (Float, Nozzle, Sub light, module controller, pump, outdoor control panel) N.S. Item. Providing & Fixing.

Providing and fixing elbow, Tee required in utility : Elbow N.S. Item

Providing and fixing elbow,Tee required in utility : Tee N.S. Item

Exhaust Fan (24" Exhaust fan (600mm), Power: 550 Watt, Speed 900 RPM, Air Delivery 10400 CMH, Phase: 3 Phase, Brand Herculean ) @ HSR no. 20.72.

Ceiling Fan (Sunline ceiling fan 48 inch) @ HSR no. 20.71.1

LED Batten Tube Light 20 Watt. N.S. Item. Providing & Fixing.

Design, supply, Installation, testing & commissioning of 5 KWp off grid Solar roof power plant System EPC with 4 batteries ( solar module, civil foundation & electrical wiring) (1 year service maintenance) (N.S. Item) ISI Marked.

Supplying, filling, spreading &leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (Stone Boulder 50 mm to 200 mm) @ HSR No.33.12(Complete Nomenclature HSR)

MS Cover size 1.2 Mtr. X 1.2 Mtr x 50 MM thickness. N.S. Item

G.I. PIPE-Supply of GI Pipe As per IS:1239, ISI Marked Size - 300 mm NB/ 305 mm OD, Wall thickness 5.0 mm (+/-) tolerance) N.S. Item

Screen mesh ( 1m X 1m ) N.S. Item

Providing and sprinkling Bio-Culture (Bioneer- Propriety items) in proportion 1 litre per 10 KLD (Capacity of STP) N.S. Item. NEERI approved.

Supplying and placing plants of approved species ( in arrangement format - 6 Nos. per square meter) on the top surface of Phytorid bed N.S. Item. ( As per NEERI)

Providing and setting up Hypo-Chloride Dozing System(HDPE make) of tank capacity 500ltr with dozing pump of capacity 0-10 lph in two numbers with agitator of any make ISI or DJB approved. N.S. Item

Dozing of Hypo-chloride solution (12%) at dozing rate of 5ppm. (0.9 kg per day) = (0.9 x 365 Kg / year), Considering for 3 years N.S. Item. (As per NEERI )

Supply of Prefabricated Portable office of (size 20'x10'x8.5') as per drawing and Work Station as per drawing (Portable platform, Wall, roof, door, window) N.S. Item

BIG TREE ( Neem ) N.S. Item

MEDIUM TREE (Gulmohar) N.S. Item

SHRUBS (Kaner) N.S. Item

SHRUBS (Nagfani) N.S. Item

SHRUBS ( Bougainvelle) N.S. Item

Dashboard charges for Data in PiezometerN.S. Item

Farmyard : Supplying and stacking at site of work well decayed farm-yard manure from any available source, approved by the Engineer-incharge including screening through sieve of I.S.designation 16 mm with 5 km lead. HSR Item No 26.1

Providing and laying readymix plain cement concerte M-15 design mix (complete Nomn.) HSR No.6.22.2.2

Operartion and maintance under water bodies & coverage system for 1 year @ 2.86 % of total Civil Cost