COMPREHENSIVE REPAIR/MAINT AT KARAM SINGH ENCLAVE MD ACCN AND ADJOINING AREA UNDER GE PANAGARH

Amount

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Taking down the wooden shutter/window/garage iron gate and refixing in position after welding (exc 6mm but n exc 9mm) in repairs exc 1 sqm but n.exc 2 sqm in length complete

Taking down chowkat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed

Taking down chowkat or frame with shutters exc 1.50 Sqm and not 4 sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1 sqm each and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed

M&L for 1.25mm thick pressed steel frames of 125x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-06 Nos. & 75mm size-02 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be filled in door frame, complete all as specified and directed.

M&L for chowkat 2nd class hard wood plain, solid, straight, chowkats and frames wrought , framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge.

M&L for 1.25mm thick pressed steel frames of 105x60mm size suitable for doors with one or more rebates including necessary fixing lugs, hinges (125mm size-03 Nos. & 75mm size-01 in each door frame), lock strike plate etc. including one coat of red oxide primer & PCC 1:3:6 type C-0 be filled in door frame, complete all as specified and directed.

S&F 30 mm thick Flush shutters ,solid core construction ,with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-In-Charge .

S&F 25mm thick 2nd class hardwood Glazed and skeleton windows, ventilators shutters etc are provided with stiles and rails as specified in SSR Part I, Section 8, clause 8.24 (b); complete all as specified and directed by Engr-In-Charge .

S&F for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F Beads in doors/window, straight (any size) for glazed/wire mesh or gauzed joinery made of 1st class Hardwood, renewed, including mitres etc.. and removing old beads to Store .

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel Butt hinges100mm long medium weight, cold rolled complete all as specified and directed

S&F 75mm long butt hinges, extruded aluminium alloy/stain less steel with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed

S&F aluminium anodised 75 mm barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 75 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repair for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repair 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repair for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and directed

M&L for Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work for snake guard complete all as specified and directed

S&F Block boards 18/19 mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work for shelve and wardrobes etc complete all as specified and directed

S&F Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for shutter, fixed with screws to timber frame work complete all as specified and directed.

S&F in repair harrison curtain rails, mild steel, chromium plated with conical end balls suitable for fixing as end of curtain/drapery rods complete all as specified and directed

Repair to steel windows area exc 1 sqm but n.exc 2 sqm etc, replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Note: Cost of spare parts upto Rs 200/- deemed to be included in quoted rates).

Repairing aluminium windows area exc 1 sqm but n.exc 2 sqm etc, replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Note: Cost of spare parts upto Rs 250/- deem to be included in quoted rates).

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm of make Prayag Cat No P-440 complete all as specified and directed

S&F in repair steel window handles (fixed with bolt for left or right side, or to be fixed by welding as required at site) complete all as specified and directed

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ panelling, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan complete all as specified and directed

M&L for framed work such as grills etc with ends of bars shouldered and or rived or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan in wooden frame/steel frame complete as directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators complete as directed.

Welding in repairs exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm for windows and ventilators

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necessary formwork complete as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc

S&F in repair Framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F Mild Steel work as in framed roof trusses, purlins, rails and frosting incl distances pieces, cleats etc conforming to Fe 410 - O or Fe 310 -O complete all as specified and directed.

S&F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed.

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Glazed ceramic tiles Coloured 350 x 250mm / 450 x 350mm 7 to 8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Non Skid coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surface such as skirtings etc. set and jointed in cement slurry over 10 mm thick rendering in CM 1:4 complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

Renewing tiles in patches on vertical surfaces, area n.exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles with 10mm thick rendering in CM 1:4 complete all as specified and directed Notes : (i) New tiles required to supplement old ones shall be measured and paid for at ‘Supply only’ rates under relevant item of this Schedule. (ii) Colour of new tiles shall match with existing broken old tiles.

Supply only glazed ceramic coloured tiles of size 300mm x 200mm x 7mm thick complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) finished the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick chequered cement pre-polished coloured concrete tiles of size 30x30x25 mm, set, jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per specification.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed.

M&L for brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:4) complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster in CM (1:6) on fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed..

M&L for Rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound @ 3% by weight of cement content complete all as specified and directed. Note :- WPC will measured and paid separately under relevant item of schedule.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for welding mild steel wire mesh weighing not less than 1 kg sqm and primed with Nitco zinc primer , fixing to the prepared concrete surface through proper fixing arrangements and applying 40mm thick average cement mortar with guniting /shotgun at a pressure not less than 4 kg sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including lapping of new reinforcement to the rusted portion all as per manufacturer's instructions and carried out the work as per procedures complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for preparation of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of wood and wood based primer of any description not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n.exc 10cm girth complete all as specified and directed

S&F for 20 mm outer dia CPVC, SDR 11 & plain CPVC SDR 11 plain/brass treaded fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Item No 88.00 mentioned above but 25 mm outer dia complete all as specified and directed.

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve/angle valve , chromium plated concealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length 450 mm complete all as specified and directed

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

Supply & fix in repairs vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphon pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, commander (Sim Line) incl flush pipe of polyethene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

S&F PVC waste pipe 32mm dia for wash basin 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia for wash basin 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair PVC waste pipe 40mm dia for sink 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair 40 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for sink complete all as specified and directed.

S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair for toilet jet spray stainless steel grade-304 triangle nozzle with 2 feet tube including making connections and fixed in position complete all as specified and directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

M&L for releasing airlock, cleaning GI tubing 15/20mm for blockage of water and making water supply properly functional from OHT complete all as specified and directed.

S&F Repair to flushing cistern by providing siphon washer set and providing ‘M’ seal in flush outlet pipe and making it fully functional complete all as specified and directed.

S&F Brass spindle suitable for 15 mm dia CP bib tap, CP stop cock short body / long body and C P pillar cocks, fixed in repairs complete .

S&F in repair 15mm bore CP brass mixer for sink for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. (Make: Parryware/Prayag/Cera)

Fixing only of any type of cock / valves i.e. stop valve, bib cock, pillar cock etc including forming necessary threading etc and including provision of necessary small GI fittings like socket / union / nipple / reducer etc of suitable dia complete all as specified and directed

S&F in repair for Gun metal gate valve,15 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating @150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wall and ceiling board of any description complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

S&F powder coated aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws, complete all as specified and directed.

M&L for 18mm to 20mm thick green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed CM(1:6) complete all as specified and directed.

S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with PVC clamps for rain water pipes complete all as specified and directed. Make : Supreme/ Finolex.

S&F PVC SWR bends of 150 mm bore complete all as specified and directed.

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps complete all as specified and directed. Make : Supreme/ Finolex.

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint, laid in trenches or in floors complete all as specified and directed.

S&F PVC SWR bends of 110 mm bore complete all as specified and directed.

S&F PVC SWR bends of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F as in repair grating square 150mm size of PTMT (minimum 100 gms) complete all as specified and directed.

S&F as in repair grating square with waste hole 150mm size of PTMT (minimum 100 gms) complete all as specified and directed.

M&L for (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitious composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment.

E/M Portion Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed

All as per item No 135.00 above but 5 Amp socket on same board with other switches complete all as specified and directed

All as per item No.135.00 above but 5 Amp socket on Independent board with other switches complete all as specified and directed

All as per item No.135.00 above but one bell point with other switches complete all as specified and directed .

M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5.0 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified.

S&F socket outlet 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch duly marked complete all as specified and directed.

S&F socket combination outlet 2 in 1 multipurpose 5 pin, (6 Amps) flush type 230/240 V controlled by one switch duly marked complete all as specified and directed.

S&F switch 16 Amps, 230/240 V complete all as specified and as directed

S&F socket outlet 2 in 1, 6 pin, (16 Amps) flush type controlled by one switch complete all as specified and as directed

S&F ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and as directed

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and as directed

S&F in Bell push, flush type, 5 amp duly marked complete all as specified and as directed

S&F bell, AC 230 Volts, single pole 230 volts complete all as specified and as directed

S&F lamp holder, polycarbonate body with back plate straight or angular suitable for batten fittings complete all as specified and as directed

S&F wall security light fittings 35 watts 230v, minimum lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as directed.

S&F submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

Supplying and fixing submain two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing and caping (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified

S&F in repair 12 watt surface mounted round LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclosures, with separate replaceable constant current driver for grid ceiling including electrical connection all as directed by EIC.

S&F wall security light fittings 35 watts 230v, minimum lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and as directed

S&F in repair 10 W LED light fitting mirror type 2',220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and as directed

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable.

S&F lumiline Plus Mini surface mounting special application length LED battens in Extruded aluminium housing batten size (LxWxH) 550x23x33)mm18 W LED light fitting mirror type 220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed.

S&F lumiline Pro Batten Mini surface mounting gernal purpose ultra-slim economical LED battens in Extruded PC housing and square shaped diffuser with wide range of wattages to suit variety of application areas size (LxWxH) 1100x24x33)mm 20 W LED light fitting mirror type 220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and as directed

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. Note: All wire connection with suitable size copper lugs complete all as specified and as directed Make :Havells/ABB/Legrand.

S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed Make :Havells/ABB/Legrand.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed Make :Havells/ABB/Legrand.

S&F in MCB SP 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider

S&F in MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider

S&F in MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider

S&F in MCCB 4 pole, 3 phase, 415 volt of capacity 63 Amp, 16 KA complete with proper copper thimbles, copper reducer etc all as directed. Make : ABB/Legrand/Hager/Schneider

S&F in repair epoxy powder coated sheet metal enclosure for DBs double door (when MCBs to be used ) single pole and neutral 415 V (VTPN) 4 Ways with mounting fitted with bus bar DIN channel neutral link and incoming contract complete all as directed by Engr-in-Charge Make : ABB/Legrand/Hager/Schneider Note : DB, MCB and MCCB will be same Make.

Taking down and Repair/checking and fixing only and connecting electric meters up to 25 Amp including checking neutral phase, earth wire etc all as directed by Engr-in-Charge

S&F in repair bell, AC 230 Volts, single pole 230 volts all as specified and directed

S&F in repair switch piano flush type, single pole, 5/6 Amps, one way complete all as specified.

S&F in repair socket outlet 2 in 1 multipurpose 3 pin, (6 Amps) flush type controlled by one switch duly marked complete all as specified and directed.

S&F in repair switch socket Combination 6 A/16A, 5 in 1 flush type with fuse & neon indicator controlled by one switch two hole type complete all as specified and as directed

M/S S M ENTERPRISE

KAZI SAHABUL ALAM

SANJAY KUMAR SUPAN

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

M/S JOYGURU ENTERPRISE

S.P.S. SUPPLIERS

N B CONSTRUCTION

SINGH CONSTRUCTION