CERTAIN REPAIRS TO JOINERY, FLOORING AND SANITARY FITTINGS IN SECTOR 24, 37, 38, 42 AND RCMA BLDG 3BRD AT CHANDIGARH UNDER GE I R AND D CHANDIGARH

Amount

Taking down shutters of any description area exc 1.00 Sqm and n. exc 2.00 Sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Supply and fixing for pressed steel frames of size 105 x60mm for doors with one rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Supply and fixing for pressed steel frames of size 125 x60mm for doors with bouble rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Supply and fixing for in opening complete solid PVC door frame of size 50mm x 47mm made outt of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and plain colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site all as specified and directed.

Supply and fixing for mild steel, plain black sheet in hearths; covering to door shutters; cupboard shutters; covering to door chowkats (frame)including godrej pattern locking arrangement cut to size edges beaded if directed holes punched; including rounded headed screws, clout nails or revets and fixed to wood or steel members etc with plam 40mm lap joints or welded riveted seams including bending turning up mitred angles stopped ends outlets etc 0.80mm thk incl spray painting both side all as specified and directed by Engr-in-Charge

Supply and fixing for of factory made panelled shutter 35mm thick (two number of panels) with panels, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers all as specified and directed.

Supply and fixing for glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain chamfered or rounded fittedwith cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) 35mm thk IInd class hard wood all as specified and directed.

Supply and fixing for galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and directed.

Supply and fixing for 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing for mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and directed.

Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

Supply and fixing for 150mm aluminum handles cast type anodized complete all as specified and directed.

Supply and fixing for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plates including fixing with welding complete to iron frame

Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reiforced complete all as specified and directed.

Material and labour for PCC 75mm thick Type C-2, 1:3:6 using 40mm gradded aggregate as in plinth protection all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bedding layer for laying floor finishes complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for glazed ceramic coloured tile in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7mm thk set and sointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick rendering in cement mortar (1:4) finished even and fair all as specified and directed.

Material and labour for non skid coloured ceramic tiles of size 7-8 mm thick area of each tiles exceeding 0.06 Sqm bur not exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles including 15mm thk screed bed in CM (1:6) complete all as specified and directed.

Material and labour for non skid coloured ceramic tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles including 15mm thk screed bed in Cement mortar in cement mortar (1:6) complete all as specified and as directed.

Material and labour for vitrified Ceramic tiles 10mm thick light shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 SQm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match all as specified and directed.

All as per serial item no 24.00 above but in vertical surface such as skirting, dado and risers including 15mm thk rendering in CM (1:4) finished even and fair all as specified and directed.

Material and labour for machine cut kota stone slab floorig 20-25mm thick over cement screed base laid and inted with rey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 15mm thk screed bed in in CM (1:6) complete all as specified and directed.

Kota stone slab 20-25mm thk in riser of steps skirting dado and pillar laid over cement screed and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thk rendering in CM (1:4) finished even and fair complete all as specified and directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing including screed bed 15mm thk in cement mortar (1:6) all as specified and directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut,as in skirting or dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigmernt to match the shade of granite stone incl grinding and polishing including 15mm thk rendering in CM 1:4 finished even and fair complete all as specified and directed.

Supply and fixing for chequered cement concrete tile 20cm x 20cm x 25mm thk ultra finish set and jointed and pointed in neat cement slurry with mixture of white cement and pigment including screed bed 15mm thk in CM (1:6) all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:6 to brick/Concrete wall surfaces finished even and smooth w/o using extra Cement all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:4 to brick/Concrete wall surfaces finished even and smooth w/o using extra Cement all as specified and directed.

Demolition of brick masonary built in CM including all quoins, arches pillars etc but exceluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for sub class B brick straight or curved on plan exc 6m mean radius in CM 1:6 all as specified and directed.

All as per serial item no 34.00 above but except Brick all as specified and directed.

Material and labour for keyed pointing to brick masonary, uncoursed or brought upto courses incl preparation of surface complete in CM 1:4 all as specified and directed.

Material and labour for two coats of oil distemper over one coat of priming incl necessary preparation all as specified and directed.

Material and labour for two coats of cement base paint over a coat of white wash on new surfaces of walls incl preparation of surfaces complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint ordinary tint on new steel surface over one coat of red oxide over 10 cm width or girth not otherwise described incl preparation all as specified and directed.

Material and labour for two coats of synthetic enamel paint ordinary tint on new Wood surface over one coat of pink primer over 10 cm width or girth not otherwise described incl preparation all as specified and directed.

Supply and fixing for 10 liters capacity PVC valveless syphonic action type flushing cistern low level White with inlet ball valve & float, and handle including flush pipe of polythylene of low or high density of PVC, 32mm dia for low level cistern including bracket fixed in repairs complete all as specified and directed.

Supply and fixing for brass CP basin mixer for mixing hot and cold water screwed down for iron pipe 15mm all as specified and directed.

Supply and fixing for pillar taps cast copper alloy with capstan heads, CP, 15mm bore, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Supply and fixing for 15mm bore CP brass fancy type bib tap with crutch or butterfly handle with long shunk/neck screwed down, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Supply and fixing for in repair vitreous china ware W.C squatt pan, orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding fixed in repairs complete all as specified and directed.

Supply and fixing for in repair vitreous china ware white wash down water closet (pedestal pattern) including connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified and directed.

Supply and fixing for repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

Material and labour for vitreous china ware wash hand basin, flat back of size 550mmx400mm, white including brackets, fixed in repairs. complete all as specified and directed.

Supply and fixing for repair vitreous china semi pedestal pattern water closet (anglo Indian) type white (excluding fixing bolts flusing cistern and flush pipe all as specified and directed.

Supply and fixing for PVC connection 15mm size with PTMT nuts 450mm length all as specified and directed.

Supply and fixing for sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fixing for repair brass chromium plated shower Rose 75mm size with long arm and swiveval neck all as specified and directed.

Supply and fixing for stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe cast iron cantilever brackets connection incl waste coupling and waste pipe union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm all as specified and directed.

Supply and fixing for 0.80mm thk stainless steel plate Rack of size 75cm x 70cm x 25cm having different section all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store all as specified and directed.

Supply and fixing for 15mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

All as per serial item no 56.00 above but fixing only all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store all as specified and directed.

Supply and fixing for 20mm bore steel water tubing galvanised , medium grade fixed to walls and ceiling or in floor complete all as specified and directed.

All as per serial item no 58.00 above but fixing only all as specified and directed.

Supply and fixing for grating dome 100mm dia of PTMT all as specified and directed.

Supply and fixing for stop valve/angle valve size 15mm bore, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle srewed both ends for iron pipe & fixed in repairs complete all as specified and directed.

Supply and fixing for ball valve high pressure PTMT with epoxy coated aluminium rod & high density pastic ball screwed for iron pipe and fixed 20mm all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge and thickness including Nainiital or similar pattern roof coveriong complete all as specified and directed.

Supply and fixing for pre painted galvalume alumiium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed.

Supply and fixing for fibre glass reinforced translucenet corrugated sheeting 0.50 mm thick with two corrugations side lap fixed with L-type or J-type or cranked hook boltsin lieu of screws all as specified and directed.

Dismantling existing Wall and ceiling boards of gypsum/perforated particle board including wooden framed work/GI frame /Aluminium frame work of any size & specifications all as specified and directed.

Supply and fixing for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. all as specified and directed.

Supply and fixing in repairs venition blinds , sheer demount blinds with aluminium roller tuber, cassette colour white fabric weight 140gms, light control 70% fabric composition 100 % polyester complete alll as specified and as directed. Make :- Vista or equivalent as approved by GE.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling of unframed timber scantling 40sqm ad over in section in any position all as specified and directed.

Supply and fixing for steel work in tubular truses including special shaped washer etc, complete using ERW or induction butt welded tubes condorming to IS1161-1979 grade St-240 all as specified and directed.

Supply and fixing for sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane 4mm thick all as specified and directed.

Supply and fixing for in repairs waste fittings 32mm dia brass CP for glazedware sinks basins etc with long screwed shanks and fly nuts flange end bedded in red lead complete all as specified and directed.

Supply and fixing for aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80Kg complete all as specified and directed.

Disconnecting and taking down, water storage tanks of any description of capacity exceeding 250 ltrs but not exceeding 500 ltrs and setting aside for refixing or removing to store etc. complete all as specified

Supply and fixing for replacement of 500 ltrs capacity, double layered polyethylene water storage tanks (Cylindrical vertical with closed top) incl hoisted and fixed in position making connections incl wash out pipe of 20mm dia GI medium grade with plug 25cm long complete all as specified

Material and labour for 19mm thick block board grade-I quality exterior grade commercial type fixed with screw to timber frame work all as specified.

Material and labour for veneered decorative 6mm thick ply wood grade-I (with BWR resin) with one side decorative face fixed with screw all as specified.

Supply and fixing for harrison rails mild steel PVC Coated 20mm curtain rod with brackets stops all as specified and directed.

Supply and fixing for tublar towel rail brass chromium plated 20mm dia D type 60mm long between flanges all as specified and directed.

Material and labour for pre laminated particle bd 18mm interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fitted with all around timber beading of 18 x 18mm all as specified and directed.

Supply and fixing for continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps all as specified and directed.

Supply and fixing for stop valve (Concelled type) cast copper alloy screwed down high pressure with crutch or butterfy handle with long shank and cup 15mm all as specified and directed.

Supply and fixing for hasp and staple safety type aluminium with hinge pin including bolt to hinge plate and fixed wit screws 100mm all as specified and directed.

Supply and fixing for bath room mirror cabinet of size 400 x 500mm with looking miror all as specified and directed.

Supply and fixing for ball catches with 8mm dia steel ball & brass body & striking plate including letting in as fixed complete all as specified and directed

Demolition of stone slab and tiles of any description or thickness laid beddeb and pointed in any mortar as in floor,apron etc all as specified and directed.

Supply and fix in repair steel almirah lock with double locking security system with full length lock of heavy nickle plated with full accessories completed all as specified and directed by Engr-in-charge.

Maint and repair of existing almirah lock of any type upto serviceable condition all as specified and directed by Engr-in-charge.

ALPHA ENGINEERS AND BUILDERS

jaswant singh

M/s Matloob Ahmed