CERTAIN BUILDING, WATER SUPPLY AND E/M MAINTENANCE WORKS AT ARMY CAMP JAMSHEDPUR UNDER GE RANCHI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site, complete all as sspecified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site, complete all as sspecified and directed.

Taking down shutters of any description n exc 1 sq. m each and removal from site. complete all as sspecified and directed.

All as per item No 3 above but area .exc 1 sqm but n exc 2 sqm each.

S&F for 2nd class hard wood (SAL) plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fitted to chowkats .

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004, complete all as specified and as directed.

S&F as in hold fasts; conforming to Fe -290 Gde E-165, complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate for fixing of hold fast and making good, complete all as sspecified and directed.

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24.

S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats.

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match, complete all as specified and directed.

S&F particle board core factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle Board Core supplying and fixing in frame at site as per specification and drawing.

S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S Tube.the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020) .

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel .

S&F 75 mm Butt hinges medium weight medium cold rolled mild steel .

S&F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section, omplete all as specified and directed.

S&F of 150 mm size aluminium handles cast type anodised.

S&F of 100 mm size aluminium handles cast type anodised.

S&F 100 mm Haps & staples safety type aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane

All as per item No 25 above, but figured glass pin headed type n.exc 0.50 sqm each.

S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod, complete all as specified and directed.

S&F brass chromium plated decorative bracket fixed to wall .

M&L in repairs 2nd class hard wood plain fillets, square, rectangular or triangular in section of sectional area exc 13 sqcm & n.exc 25 sq.cm wrought , secured with nails or brads, complete all as specified and directed.

All as per item No 29 above, but sectional area not exc 3 Sq.cm.

S&F floor door stopper 150 mm of brass body and tongue anodised with hard drawn steel spring fixed.

All as per item 31 above, but fixed in repairs.

Demolition of cement concrete (reinforcement) any description and positin not other wise specifically.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc, complete all as specified and directed.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) rough finished, complete all as specified and directed.

M&L mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

M&L Mild steel bars 6mm to 8mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to.

Demolition of brick wk masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:6) making finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work / Concrete /stone surfaces in cement mortar (1:4) making finished even & smooth without using extra cement using WPC (WPC will be measured separately).

Supply only integral water proofing compound.

S&F 18 mm thick Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screwes, solvent cement /adhesive to fabricate kitchen cabinet sides , top and bottom, door, shelf inside the cabinet and drawer including ,drawer chanel, magnetic ballcatch & other all fittings complete all as per manufacturers instructions incl taking out old existing wooden cabinate.

S&F auto closing hinges 35mm of crank(KH-001) or 8 crank (KH-002) openable at 110 degree of make as approved.

S&F stainless steel handles of 100mm size, complete all as specified and directed.

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing) removing serviciable tile to store & rubbish off the permisses.

M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes, complete all as specified and directed.

M&L 10mm thick rendering plastering in Cement Mortar 1:4 on fair faces of brick work orconcrete surface to receive wall finishes, complete all as specified and directed.

M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match, complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons.

M&L 18 to 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required, complete all as specified and directed..

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm, complete all as specified and directed.

S&F Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long, complete all as specified and directed.

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

S&F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position .

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site, complete all as specified and directed.

S&F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position .

Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store.

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule.

S&F in repair 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule.

S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors.

S&F PVC bends any radius 100 mm dia.

S&F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing, complete all as specified and directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F in repair vitreous china pedastal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.

S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S&F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union .

S&F Chromium plated toilet paper holder with flap of standard size, complete all as specified and directed.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F 32mm flexible pipe for urinals and wash basin.

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.

Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repair PVC cabinet looking mirror box type of size 355 x 455 mm, complete all as specified and directed.

S&F Chromium plated 600mm long towel rod with brakets, complete all as specified and directed.

S&F in repair white EWC sheet cover, complete all as specified and directed.

S&F CP Health fauset with 1 Meter PVC Tube and hook.

M&L in repairs of Cast iron Nahani trap , Diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4), complete all as specified and directed..

S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm, fixed on wall surface as per manufacturer's instruction and making good the surfaces.

S&F CP Towel ring, square type including CP screws, complete all as specified and directed. (Make : JAQUAR Code. ACN-1121BN)

S&F CP Hand Shower with rubit cleaning system, size 100 x 55mm and 130mm long arm including 1.5m long flexible stainless steel hose complete. (Make : CERA Cat No. CG-F7030101 Rain shower, Cat No. CG-104 shower arm).

S&F 15 mm bore two way long body bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.( make- Esscco cat no TQT 512A).

S&F CP soap tray fixed with rawl plugs, complete all as specified and directed.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe, complete all as specified and directed. (Make- Essco, cat no MQT-5178)

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe, complete all as specified and directed. (Make- Essco, Cat No SQT-516KN)

Supply and fix PVC connections 15 mm size with PTMT nuts of length 900mm.

S&F towel ring square with round flange.

M&L for preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty, complete all as specified and directed.

M&L for preparation of old decorated surfaces on walls and applying one coat of oil bound distemper of approved colour and shade, complete all as specified and directed.

All as per item No 102.above, but two coats of oil bound distemeper.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty, complete all as specified and directed.

All as per item No104.above but as on celling.

M&L for preparation of new plasterd wall surfaces and applying two coat of cement based paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old decorated surfaces on walls and applying one coat of cement based paint of approved colour and shade, complete all as specified and directed.

All as per item No 107 above, but two coats of cement based paint.

M&L for preparation on new wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coat of synthetic enamel paint of approved colour and shade over pink primer, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade, complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of weather proof exterior emulsion of approved colour and shade over 2 mm thick wall putty, complete all as specified and directed.

S&F PVC door bottom weather strip door brush sweep seal .

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, fillings and Mass concrete, complete all as specified and directed.

M&L for brick work using sub class B bricks straight of curved on plan exc 6m mean radius built in CM (1:4), complete all as specified and directed.

M&L for 100 mm PCC(1:3:6) type C-2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed.

Forming construction/expansion joints 40 mm deep x 10mm wide, filled with Grade 'A' sealing compound complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise privided for, complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W (Gde- E-250) quality- B incl structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication.

Dismantling posts or struts (wood steel or RCC) any section, including taking out embedded portion (post embedded in concrete) and making good disturbed ground.

Excavation in post holes( or similar holes) each n exc 0.5cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earh around , in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/ loose soil.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including and all necessary drilling, bolting and riveting etc and similar work conforming to Fe-290 or Gde E-165.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed with the other end each screwed end to be fitted with washers and one hexagonal or square nut n. exc 5 cm long of diameter of shanks 11 to 15 mm.

Dismantling fencing wire mesh,any type.

S&F for 3 mm Dia GI wire 100 x 100 mm mesh,(chain link fencing) made up into mattresses, or cages lapped wired and laid in position including closing and binded and tied with RCC posts properly, complete all as specified and directed.

S&F in repair of GI barbed wire 2 strands 3 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including sewing or tying with GI wire all as shown on drgs. (Each line wire to be measured), complete all as specified and directed.

M&L for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

M&L applying two coat of black japan paints over one coat of red oxide primer on steel surfaces n.exe 10cm in width or girth including preparation of surfaces, complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded aggregate as in benching of manholes and finishing even and smooth with extra cement, complete all as specified and directed.

M&L for forming fair finished drain or channel n.exc 30 Cm inner girth in cement concrete using extra cement including forms moulds mitered stopped ends etc, complete all as specified and directed.

Cutting into existing manholes for connecting new drains,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section in )cement concrete(1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm dia of pipe, complete all as specified and directed.

M&L Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radious built in CM (1:6), complete all as specified and directed.

M&L cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia 100 mm to 200 mm by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC, gully trap, Nahani trap up to the first manhole and from manhole to manholes including desludging and make it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt etc to a distance n.exc 500 m and burying it in pits and covered with earth and spreading lime @ 1 Kg per Sqm of covered area, complete all as specified and directed.

Cleaning maholes by desluding and getting out all silts and sludge Organic and inorganic materials by mannual/mechaniclally and removing the sludge to distance exceeding 400 mtr but not exceeding 500 m away from site and burying it into the pits and covered with earth including spreading lime 1 kg per Sqm, complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

Demolition and breaking up drain pipes SGSW/RCC pipe set in cement mortar of internal dia 100 mm, complete all as specified and directed.

All as per item No 138 above but 150mm.

Alll as per item No 138 above but 200mm.

M/L for PCC (1:3:6) type C-2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for internal dia of pipe 100 mm, complete all as specified and directed.

All as per item No 141 here-in-before but for 150mm dia of pipe, complete all as specified and directed.

All as per item No 141 but for 200mm dia of pipe, complete all as specified and directed.

M&L for 100 mm dia of reinforced concrete pipe ,class NP2, laid and jointed, complete all as specified and directed.

All as per item No 141 but 150mm dia pipe, complete all as specified and directed.

All as per item No 144 but 200mm dia pipe, complete all as specified and directed.

Demoltion of RCC in any description and in any position, complete all as specified and directed.

M&L for pre-cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab etc set in CM (1:4), complete all as specified and directed.

S&F 10mm dia and over MS round bar cut to length bent to shape required for manhole or rungs or like all over as directed at site.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L for dismantling the power supply of electric motor any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the rotor with super enameled copper wire as per the existing guage with necessary insulation, sticks and varnishing, including replacement of shaft bearing of shaft and replacement of bearing 02 Nos and motor terminals plate/cable ducts and minor repair of strater complete of capacity 60 HP including two coat of synthetic enamel painting complete all as directed including reassembling, testing and commissioning for satisfactory operation. All items to be of ISI standards with One Year Warranty by the contractor.

M&L dismantling complete Centrifugal Pump set of any type and overhauling the pump re-threading of wornout holes of studs and providing over size studs with nuts and washers. Remantlling and balancing of shaft, replacement of gunmental bush, all bearing type 6309/6307/6307C etc and gland packing (12/8 mm) of pump set and refitting the same after the repair all as specified capacity 60 HP including two coat of synthetic enamel painting, SM No writings etc complete with base etc all as directed. All items to be of ISI standards with One Year Warranty by the contractor.

S&F in replacement tubes, 'medium grade', galvanized, with all fittings; laid in trenches of following sizes :-

15 mm bore dia

20 mm bore dia

25 mm bore dia

40 mm bore dia

50 mm bore dia

80 mm bore dia

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore dia:Make-Shakti/Scud, for the following bore dia :-

50 mm dia

40 mm dia

25 mm dia

15 mm dia

M&L for Bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.)Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot), upto 100mm bore dia collars, caps and plugs, complete all as specified and directed.

M&L for rubber gasket joint for flange joint, complete all as specified and as directed, upto 100mm bore dia, complete all as specified and directed.

Supply and replace cast iron sluice valve with flanged ends, confirming to IS-780 type PN-1.6 cast iron body with CI wheel brass spindle, joints with rubber gaskets including bolts nuts and washers complete with ISI mark size 100 mm CI line in position, complete all as specified and directed.

All as per item No 158 above but size 80mm bore pipe.

M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specified and directed.

M&L for 1.00 mm Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; includinground headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed.

Ductile iron pipe S/S including tyton joint special class "k-7" supplied and laid complete 100 mm dia, complete all as specified and directed.

Taking down carefully aluminium point wiring any type including battens of any type except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose,lamp holder,pendants,bell, bell push, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface, complete all as specified.

M&L point wiring with FRLS 1.5 Sqmm multi strand PVC insulated and unsheathed copper conductor cable in and including surface caping and casing complete with 1.60mm thick Metal Boxes from 2 module to 12 module as required at site concealed in wall , painting boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including FRLS1.0 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following :-

One light/fan/exhaust fan point controlled by one switch.

One 5 pin 5 Amp switch socket out let point on an independent board.

One 5 pin 5 Amp socket out let point controlled by one switch on same board.

One bell point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq mm

All as per item 2 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.50 Sqmm FRLS including one run of 2.5 Sqmm copper conductor as earth continuity wire (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified. Note : (i) All wiring cable shall be multistranded FRLS copper conductor of approved make duly approved by accepting officer before incorporating in work. (ii) Colour Code as per IS to be followed for wiring

S&F switch piano flush type 5/6 Amp single pole one way

S & F Swtch Modular type 6 Amp single pole one way

S & F socket modular type 5 Amp 5 Pin, complete all as specified and directed.

S & F Modular Bell push 6A 1 module.

S&F bell push , flush type, 5 amp , all as specified and as directed.

S&F Bell multi music type, AC, 230 volts, single pole,complete all as specified and directed.

S&F in replacement Delux fan regulator ( Rotary step 100W) on the existing phenolic laminated sheet etc as required, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 amp multipurpose, flush type, complete all as specified and directed.

S&F Switch socket combinations 6 pin 15 Amp.

S&F socket Modular type 6 Pin 15 Amp.

S&F modular white cover plate with frame,2 module

S&F modular white cover plate with frame,3 module

S&F modular white cover plate with frame,4 module

S&F modular white cover plate with frame,6 module

S & F modular white cover plate with frame,8 module

S&F modular white cover plate with frame,12 module

M&L for lamp holder, insulated body with back plate batten/angle type for batten fittings complete all as spcd & directed.

S&F switch modular type 16 Amp SP one way . (Make:Anchor/ Legrand/Havells (Crabtree)

S&F ceiling rose surface bakelite 65x50mm three terminal AC 230 volts, complete all as specified and directed

S&F for LED Tube light (Single side connection) ) with very high effiency suited for installation in existing tubelight G13 lamp holders to give glare free cool day light 20W LED 0 with Regal batten for LED tube (single side connection) upto 1x22W LED tube including pre-wired equivalent Philips/Surya/ CG/Jaquar/Havells ,230 V Energy efficient with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F in replacement for LED light fittings, 9/10 W bulk head luminaires, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V , 50 Hz Make: Philips/Wipro/Bajaj/CG/GE/Havells/Anchor/C&S/ Jaquar)

S&F in replacement for Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. .

S&F in replacement decorative wall mounting luminaries light suitable for LED lamp 9 watts sprially type with all accessories like lamp holders, etc complete with pre-wired, complete all as specified and directed. Make: Philips/Wipro/Bajaj/CG/GE/Havells Cat part LHFOAJE1TZ1I060

Taking down MCB DB single pole and neutral upto 12 way with MCBs and keeping aside in safe custody for taking it as schedule of credit, complete all as specified and directed.

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 4 Way double door with 200 amp rated bus bar 240 V, complete all as specified and directed. Make : HPL/ Legrand/havells/ C&S/ABB/Indoasian/ Hager/Anchor

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 8 Way double door with 200 amp rated bus bar 240 V, complete all as specified and directed. Make : HPL/ Legrand/havells/ C&S/ABB/Indoasian/ Hager/Anchor

S&F sheet metal enclosure single door DBs for using MCBs single pole and neutral 12 Way double door with 200 amp rated bus bar 240 V all as specified. Make : HPL/ Legrand/havells/ C&S/ABB/Indoasian/ Hager/Anchor

S&F isolator Single pole and neutral 40 A, 240 V

S&F isolator Single pole and neutral 63 A, 240 V

S&F MCB single pole 6 - 32 Amp. Make : HPL/ Legrand/havells/ C&S/ABB/Indoasian/ Hager/Anchor

M&L Earthing complete with galvanized GI earth plate electrode of size 600 x 600 x 6.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level)with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts of galvanized iron or steel including excavation and earth work in any type of soil, charcoal salt filling 15 cm around the earth plate as shown in electrical plate no 3 of SSR part-I 2004, 20 mm bore, GI watering pipe medium grade 1.50 mtr long & GI protection pipe light grade 15 mm dia from earth pit to main board including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40 mm thick, reinforced with 8mm dia deformed bars @ 100 mm c/c both ways with lifting handles and funnel etc including testing as directed.

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi-strand, complete all as specified and directed.

All as per item No198 above but size 6 sqmm twin core cable.

All as per item No 198 above but size 4 sqmm twin core cable.

S & F in replacement Garden spike light and mini flood luminaires black powder coated pressure die cast alluminium housing with mounting bracket Make : Bajaj/HPL/Crompton cat part LBTW-10-CDL

S&F in replacement of sub main wiring alongwith earth wire with the folowing sizes of FRLS PVC insulated copper 100V grade conductor, single core cable in surface/recessed as required drawn in and including PVC conduit with all accessores such as saddles, screws etc, all as specifed and as directed of the following :-

2 x 6.0 sq. mm + 1 x 4 Sq. mm earth wire

2 x 4.0 sq. mm + 1 x 2.5 Sq. mm earth wire

M & L for replacement of unserviceable Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 4"x4" and 40 mm deep, ISI marked, complete all as specified and directed.

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 8"x4" and 40 mm deep, ISI marked, complete all as specified and directed.

S&F PVC/ Polycarbonate PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size10"x12" and 40 mm deep, ISI marked, complete all as specified and directed.

Taking down old burnt electric single/three phase meter of any type and Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 3779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH, complete all as specified and directed.

S&F in replacement of electronic chock 36/40 Watt ISI marked. Make - Philips/ Bajaj/Havells

S&F in replacement of 5 Amp socket out let 5 pin ISI marked.

S&F in replacement of switch socket combinations flush 5 Amp 5 pin competeI ,ISI marked

S&F in replacement of switch socket combination 15 Amp, ISI marked

S&F switch piano flush type 5 Amp single pole one way.

S&F regulator step type 450 watt 230 Volt 50 C/S

S&F call bell ding-dong type AC 230 Volt

S&F Lamp holder, PVC/Polycarbonate ype with cord grip cap suitable for pendant fitting, complete all as specified and directed.

M&L XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, in trenches/fixed on wall with supporting insulators/saddles etc for following size, complete all as specified and directed.

70 Sq mm 3.5 Core

50 Sq mm 3.5 Core

16 Sq mm 4 Core

10 Sq mm 4 Core

Supply and lay in trenches/fixed on wall GI tubing Medium grade with necessary fittings such as bend, tee,elbow etc complete for the following sizes for protection of LT UG cable :-

80 mm bore

50 mm bore

Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in Soft/loose soil soil complete all as specified.Note: Any damage (due to JCB if employed) on existing installations will be reapaired by the contractor at his expense.

Returning filling incl leveling watering and well ramming in layer not exceeding 25 cm thick, complete all as specified and directed.

Removal of surface soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point, complete all as specified and directed.

S&F quarry sand for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable, complete all as specified and directed. (Note: Punned thickness shall be taken for measurement)

M&L for laying Bricks, common burnt clay building sub-class 'B' old size bricks for protection of cable in trenches, complete all as specified and directed.

M&L for road cutting /removing the hard Standing/Cutting floor inside the Substaion /E/M Installtions / Path for laying of cablesof any size, complete all as specified and directed.

S&F MCB 63 Amp , 3 Pole ,10 KA, complete all as specified and directed. Make: Indo Asian /Legrand /L & T /Standard/Havell's

S&F MCB 100 Amp 3 Pole ,10 KA, complete all as specified and directed. Make: Indo Asian /Legrand /L & T /Standard/Havell's

S&F MCCB 4 pole 125 Amp 16 KA, complete all as specified and as directed. Make: Indo Asian /Legrand /L & T /Standard/Havell's

S&F LT OH lines on existing poles with ACSR conductors size 3 of 6/1x3mm(Ferret), 1 of 6/1x2.59mm(weasel).

S&F LT OH lines on existing poles with ACSR conductors size 2 of 6/1x2.11mm(Squirrel).

Taking down window/split type AC capacity 1.5 ton for dismantling / taking out cut /uncut compressor unit and taking out the same for replacement, complete all as specified and directed.

Supply and fixing of sealed compressor any type/Make of 1.5 ton capacity (As taken out vide srl item No. 1 above) fixed with all accessories etc, complete all as specified and directed. (Make-Existing Brand/ LG/ Voltas/Bluestar)

S&F of sealed compressor any type/Make of 2 ton capacity (As taken out vide srl item No. 1 above ) fixed with all accessories etc. complete including testing all as specified and directed for AC & Deep Freezer. Make-Existing Brand/ LG/ Voltas/Bluestar

Supply and charging of refrigerant gas R-22/R-12 ecofreindly for air conditioner, complete all as specified and directed.

Supply and charging of refrigerant gas R-134a for refigerator, deep freezer and water cooler

S&F starting capacitor of capacity 100 -150 MFD (Make-Existing Brand/ LG/ Voltas/Bluestar)

S&F running capacitor of capacity 6-36 MFD Make- (Make-Existing Brand/ LG/ Voltas/Bluestar)

S&F running capacitor of capacity 45 MFD. Make-As per sample

S&F relay for window type AC/Split type AC of capacity 1.5 TR (Make-Existing Brand/ LG/ Voltas/Bluestar)

S&F of over load protection assembly, type 1622 for window type AC/Split type AC Make-Existing Brand/ LG/ Voltas/Bluestar)

M&L for Air filter suitable for split type AC, complete all as specified and directed. Make-Existing Brand/ LG/ Voltas/Bluestar

S&F thermostat for window type AC /Split type AC of capacity 1.5 TR Make- Make-Existing Brand/ LG/ Voltas/Bluestar

M&L for Evaporator unit for split type AC of capacity 1.5/2 TR Make-Existing Brand/ LG/ Voltas/Bluestar

S&F codeless control unit with PCB Kit suitable for split type AC 1.5/2TR capacity. Make-Existing Brand/ LG/ Voltas/Bluestar

S&F PVC insulated and sheathed cable 3 core, 4 sq mm copper conducter 1100 V grade. Make- Anchor/Havells/Polycab

Servicing of window/split type air conditioners 1.5/2 ton including checking all parts, cleaning the filters, tightining any loose parts and replacement of defective wiring kit, split pins, nuts bolts and washers, brazing, valve replacement, leak testing, temprature setting etc complete all as specified and directed at site Note- Servicing will be attended at site only

S&F for replacement of fan motor of required make and size of following capacity to suit the existing window/ split type AC including dismantling the unserviceable fan motor . Make-Existing Brand/ LG/ Voltas/Bluestar

M&L for rewinding fan motor of following capacity of any make and size to suit the existing window / split type AC.

Supply and fixing of sealed compressor for 40 Ltr /hr capacity water cooler fixed all as specified and directed. Make Existing Brand/ LG/ Voltas/Bluestar

All as per item No 247 above but for 150 Ltr/hrs

S&F in replacement of electric blower motor ,single phase,230 volts of water cooler, 40Ltrs /hr including testing, complete all as specified and directed. Make-Existing Brand/ LG/ Voltas/Bluestar

S&F relay for water cooler of capacity 40 ltrs/hr type 412L. Make-Existing Brand/ LG/ Voltas/Bluestar

S&F relay for water cooler of capacity 150 ltrs/hr type 412L Make-Existing Brand/ LG/ Voltas/Bluestar

M&L for rewinding fan motor of existing water cooler of capacity 40/80 Ltr.

S&F thermostat for water cooler of capacity 40/80 ltrs/hr Make-Existing Brand/ LG/ Voltas/Bluestar

S&F door rubber inner liner (magnetic)suitable for water cooler capacity 40 Ltrs

S&F door rubber inner liner suitable for water cooler capacity 40/80 Ltrs/hrs.

Servicing of water cooler any capacity including checking all parts, cleaning the water tank, tightining any loose parts and replacement of defective wiring kit, split pins, nuts bolts and washers etc, complete all as specified and directed. Note- All facility water cooler for repair will be attended at site only

Taking down cut/uncut unserviceable compressor unit from Refrigerator capacity 120 to 320 Ltr capacity and taking out the same for replacement, complete all as specified and directed. Make-Existing Brand/Kelvin/LG/Whirpool

S&F sealed compressor for 120 to 320 Ltr /hr capacity Refrigerator (as taken out vide srl item No. 257 above) fixed complete all as specified and directed. Make-Existing Brand/Kelvin/LG/Whirpool

S&F starting capacitor of capacity 40/60 MFD Make-Usha/Asian/EPCOS

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with P 65/66 protection complete. including taking down existing unserviceble IHPSV/MH fitting from from Steel /PCC pole up to 13.00 Mtrs height or from wall complete all as specified and as directed by Engineer in charge. Note: Height of new fitting should adjusted to achive better illumination level so as to match with LED fittings as directed.

S&F in replacement driver for out door type LED fitting 60 Watt of following watt, complete all as specified and directed.

S&F in replacement 2 pole Power contactors 40 Amp coil voltage 415 Volt AC for street light after dismatling existing contactors from panel and connecting new contactors and making connection with incoming and outgoing MCCB/MCB, complete all as specified and as directed for following ratings . Make: L & T /Havells/Legrand

M&L for disconnecting the electric supply, disconnecting the water pipe (cold and hot water) from the geyser of any make and any capacity, taking down the geyser by unscrewing nuts, bolts & washer from its existing place, cleaning geysers tank body properly, removing scaling with the help of brush, cleaning material etc. and re-fixing the geyser at its original place by screwing nuts, bolts & washer, connecting the water pipe (hot and cold water) and the electric supply including testing of geyser for proper working to the entire satisfaction, complete all as specified and directed.

M&L for taking out the unserviceable heating element of capacity 1.5 KW of any make and S&F new heating element of capacity 1.5 KW, complete all as specified and directed. Make-Existing Brand/Bajaj/Havells/CG

All as per item No 264 above but of 2 KW for geyser upto 50 ltrs capacity. (Make-Existing Brand/Bajaj/Havells/CG)

S&F thermostat switch suitable for fitting to geyser upto 25 ltrs capacity. Make-Existing Brand/Bajaj/Havells/CG

All as per item No 266 above but for 50 ltrs.

Replacement of bottom plate cover of MS sheet to suit the geyser capacity 25 ltrs including painting to the cover plate with 02 coat of white synthetic enameled paint over a coat of red oxide primer.

All as per item No 268 above but for 50 ltrs.

UPENDRA KUMAR SINGH