PROVN OF CLOTH WASHING POINT (DHOBI GHAT) WITH OVERHEAD SHED AND WASHERMAN SHOP AND PROVN OF TILING, FALSE CEILING AND ALLIED SERVICES TO SHELTER NEAR BLDG NO-P/8/464 AT PMS UNDER GE(P) PANAGARH

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed.

Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5 m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 1.5 m in depth complete all as specified and as directed

Excavation in trenches in soft /loose soil, exc 1.5m wide but exc 1.50 m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 3.0m in depth complete all as specified and as directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L for anti termite treatment the soil under plinth protection at the rate of 5 litre of emulsion per sqm of surface area.

M&L for anti termite treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimetre wall

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.

Removing excavated material not exceed 50 m depositing where directed level n exc 1.5 mtr above the starting point.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel TMT bars 5 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc.

Formwork to chajjas, troughs and similar items including edges fair finished complete all as specified and directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide Rough finished surfaces of concrete complete all as specified and directed

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in foundation including raft footings, foundation beams, plinth beams, bases of columns and the like complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in Columns, pillars, piers,posts and struts complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for RCC M-25 design Mix using 20mm graded aggregate in slabs supported on wall and beams and column in floors,roofs landing etc

M&L for RCC -M-25 ( Design mix) using 20mm grades stone aggregate as in chajjas roof projection etc complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs- Make:- M/S STP Texas LTD Gurgoan / Hyper Plus by IWL India Ltd Chennai / Bengal / Acquaflux of M/S Bengal Bitumene New Delhi / Polyplus 310 by STPLTD. (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (d) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

Supply only integral water proofing compound Make:- Sika / Pidilite / CICO No 1 / ACCRO No 1 /FOSROC

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in cm 1:4 all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified .( Note:- WPC measured and paid saperately)

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint, first quality, over a coat of white cement primer, etc complete all as as specified and as directed. Make:-Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper, first quality, over 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed. Make:- Jotun India Pvt Ltd / Jadoo (Bergar) / elvet Acrylic / Distemper (Crimson Paint Pvt Ltd) / British Paint / Nerolac/ Asian.. Putty Make:- Berger / J&N / Birla Laval Plast / Shalimar Paints / Asian Paints.

M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed. Make:- M/s Rayalseema Chemical Industreis / Birla White / Swastik Chemical industries.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete. Make for Bitumeme:- STP / Tikitar / Choksy Chemicals.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm mm thick as in floor/vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured of existing, incl screed bed layer (backing coat) 1:6 CM 15 mm thick

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed. Make for Item Nos. 34 & 34:- Kajaria Ceramic Ltd / Asian Granito India Ltd / Nitco /Somany Ceramics Limited / Varmora Granito Pvt Ltd / H&R Johnson India / Orient Bell Ltd ( All first quality)

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

S&F for second class hardwood plain,solid,straight,chowkats and frames,wrought,framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints. Specie:- Species: - Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. .

S & F Flush shutters 35 mm thick, solid core construction, with block board core and plywood dace panels, commercial type on both sides incl provision of suitable blocks for taking mortice locks, latches or other fittings Make:- M/S Sylvan Plyboard( India) Pvt Ltd. / MP Wood Products / Doorking Kolkata / M/s Ambika Timber Works / Premier Wood Craft (P) Ltd./ M/s Jain Doors Pvt Ltd.

S&F extruded aluminium alloy handles bearing ISI mark,, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple , bearing ISI Mark,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21, bearing ISI mark, complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts, bearing ISI mark, of extruded section with length of bolt 200 mm and fixed complete all as specified and directed, Makr for Item Nos. 39 to 42:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag / Crown.

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer com all as specified. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) /Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame,bed block,hold fast etc complete all as specified and directed.

S&F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors, including testing.

S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors, including testing.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed. Make foer item Nos. 46 to 48:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd / /Surya Roshini LTD.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S& F 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises / Blue star Silver line.

M & L for plain cement concrete type-C2 1:3:6 (40mm garaded agg.) in surface channel and drains

M & L for applying a coat of blown type bitumen at the rate of 1.50 Kg per Sqm and binding with clean dry sand @ 0.05Cum per Sqm. Make:- STP / Tikitar / Choksy chemicals.

M & L for boring holes 3.0 m deep in soil for piles, 350mm dia without under reamed and getting out and disposal of spoil to a distance on n.exc 50m as specified and directed dy Engineer-in-charge.

M & L sand cusoning in filling under floors or in foundations including watering and consolidation all as specified and as directed by Engineer-in-charge.(Note-Lime will be paid as supply only)

Supply only fat lime,unslaked. Make:- M/s Rayalseema Chemical Industreis / Birla White / Swastik Chemical industries. Note:- The quantity brought at site shall be entered in MB ,as ( NOT TO BE ABSTRACED).

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, in hard soil/PCC bed.

S & F mild steel framed work such as roof trusses (framed) trussed purlin , crane gratting , runner etc and similar work conforming to Fe 290, Gde-E 165 etc complete all as specified and directed

M&L for pre painting galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding incl ridge hip etc fixed with tapping screws & L type or J type hooks etc complete. Make:- M/S Tata Blue scope steel ltd. (colorbond steel) / equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.

M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint, first quality, over a coat of Red oxide primer complete all as specifie. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) /Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd.

M&L for Machine cut kota stone slab flooring /dados 40-50 mm thcik over 20 mm cement screed bade in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Material & Labour for mixixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting complete as directed

M&L for Plain cement concrete 1:3:6 mix, type -C1 (using 20mm graded stone aggregate) as in coping,cills,other similar bands etc., including use and waste of formwork, complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L for Screed bed or bedding layer of mortar 15mm thick (1:6) for laying floor finishes

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make:- Kajaria Ceramic Ltd / Asian Granito India Ltd / Nitco /Somany Ceramics Limited / Varmora Granito Pvt Ltd / H&R Johnson India / Orient Bell Ltd ( All first quality)

S& F Anodised aluminium snap grid frame of size 605 x605 work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats/ 2 mm dia wire made out of G.I. flat 40 x 3 mm size 60mm complete all as specifiedall as specified and as directed. Make:- Indalco / Hindalco / Jindal

S&F for 12mm th perforated particle board / tiles for insulation and accoustic purposes 60x60cm in size suitably placed in false ceiling grid made of aluminium as specification, Make:- Everest / LLOyd / Any reputed make conforming to IS as approved by the GE.

M & L for Point wiring in concealed conduit with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conducto FRLS,r ISI marked 1100 volts grade drawn through PVC conduit through walls (CONCEALED) for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable FRLS, for earth continuity and connecting to common earth dolly complete all as specified and directed for For one light point controlled by one switch.

All as per Item No.70, but for one socket point 5 Amps on the independent board

All as per Item No.70, but for one socket point 5 Amps on same board

All as per item no 70 here in before but for One 6 pin multi, socket outlet, 5/15 Amps , independent, with cables 4.0 Sq mm of size, FRLS, including 4.0 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed :- Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd./ Universal / Gloster/ MES CAB. / Bentec ( Benlo). Make for PVC Conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd. / Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.

S&F Socket outlet 2 in 1, 5 pin, 6A,flush type Universal .

S & F Switch socket combination 2 in 1, 6 pin 5 /15 A 2 in 1 flush type Universal

S & F Switch socket combination 2 in 1, 5 pin 5 A 2 in 1 flush type Universal

S &F ceiling rose 3 pole/PVC/polycarbonate isoloted body

S &F switch piano flush type single pole, one way 6 Amps. Make for item Nos. 74 to 78:- Havells/ A/nchor / Crabtree / Cona / Bajaj / Gold medal Electricals / HPL / C&S / Indoasian / ABB. (iv) Schnieder / BENLO..

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complet.

Supply and fixing LED SECURITY light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make for item Nos.79 & 80:- Havells India Ltd. / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / M/S Crompton Graves Consumer Electricals Ltd / Gold medal Electricals Pvt Ltd./ Panasonic. / HPL / Halonix / Bentec( Benlo)./ Haiger.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make:- Orient / Crompton / Bajaj/ Havells..

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, Make:- Havells/ A/nchor / Crabtree / Cona / Bajaj / Gold medal Electricals / HPL / C&S / Indoasian / ABB./ Schnieder / BENLO..

S & F MCB, DB, S P & N, 240 Volt 8 way with double double door

S&F MCB SPN 6 to 32 Amp, 240 Volt

S&F MCB SP 6 to 32 Amp, 240 Volt. Make for item Nos. 83 to 85:-Legrand / L&T / Siemens / ) ABB / GE / Schnieder / Indo Asian (Brand :-OPTI POWER) / ) Havells India Ltd / / Bentec ( Benlo).

Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.

EXTERNAL ELECTRIFICATION: M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable for 1100 Volts grade cross Sectional area 16 Sqmm 2 Core. Make:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd / MES CAB.

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230 mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for).

S&F fly ash burnt brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L GI 'Light Grade' pipe of 40 mm Bore (dia) ‘Light Grade’ for protection of cable under road. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd / /Surya Roshini LTD.

Labour only for Horizontal Boring by Passing Protection Pipe up to 80 mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed.

EXTERNAL WATER SUPPLY: Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (2”) dia., including testing, etc complete. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd / /Surya Roshini LTD.

S&F valve stop valve GM gate screwed complete for size 50 mm, dia, etc complete Make:- Upadhayay,/ Veenus/ Prayag / Shakti Entp/ Zoloto

S&F valve stop valve GM gate screwed complete for size 25 mm, dia, etc complete. Make:- Upadhayay,/ Veenus/ Prayag / Shakti Entp/ Zoloto /

M & L Construction of brick masonry chamber of 60 cm x 60 cmx 60 cm [internal dimensions] suitable for 25mm/50mm bore stop valve with PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation, brick wall with sub class ‘B’ brick, old size built in CM 1:6, PCC [1:2:4] type B1 [using 20 mm graded stone aggregate for coping, including use and waste of formwork, rendering in CM [1.4] 15 MM thick including provision of MS sheet cover 3 mm thick, angle iron frame of required size, preparing os steel surface and Providing with two coats of synthetic enamel paint, first quality, over a coat of red oxide primer to steel surfaces and locking arrangement, hinges, holdfast of required size, including necessary excavation and earth work in any type of soil complete all as specified.

Ferrul the existing main water supply pipe line 100 mm bore CI/DI/GI line for branch connection of the internal dia 25 mm

Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

M/S GLOBE ENTERPRISE

ROY ENTERPRISE

INDIAN CONSTRUCTION

ANSH CONSTRUCTION