Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC OIL INDIA LTD GATE NO 02 PO UDAYAN VIHAR GUWAHATI ASSAM | KAMRUP METRO | ASSAM | 781001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹34.0 L+₹2.1 L (6.59%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹34.1 L+₹2.2 L (6.96%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
18 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Narangi
GE Narangi C/o 99 APO
CERTAIN MISC BR REPAIRS TO VARIOUS ACCN AND EXTERNAL SERVICES IN THE AOR OF AGE BR II UNDER GE NARANGI
2022_MES_532975_1
8762/B/E8
Open Tender
Civil Works
Item Rate
180 days
GE Narangi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Narangi
₹70,000
Yes
13 Sept 2022
23 Jun 2022
20 Jul 2022
23 Jun 2022
18 Jul 2022
4 Jul 2022
Amount
SCHEDULE 'A' PART-I
Dismantling of asbestos cement sheet (corrugated or semi corrugated etc) as in roof covering complete all as specified and as directed.
S&F 6 mm thick asbestos cement corrugated or semi corrugated sheet with side lap, fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers etc.complete all as specified and as directed.
Refixing only erviceable AC sheet as obtained from dismantling of old sheets here in before with side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 6 mm thick asbestos cement two piece adjustable serrated ridge, corrugated or semi corrugated sheet fixed with 'L' or 'J' type or cranked hook bolts, nuts & washers complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.
M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M & L mild steel flat iron hold fasts fixed to chowkats complete all as specified and as directed.
M & L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed.
S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etc conforming to Fe.-410-W ( Gde-E-250) quality B.
S&F in repair mild steel angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work confoRming to Fe-290 GdeE-165 completed all as specified and as directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and diameter of shank 5 to 10mm completed all as specified and as directed.
S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.
M/L in repair for 4mm thick Non asbestos fibre cement building boards fixed or laid /inserted to timber/aluminium framework with screws complete all as specified and as directed.
Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L in repair 35mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies in shape ( measured solid) as directed including wire reinforced and set in CM 1 :6 complete all as specified and directed.
M&L in repair 25mm thick 1:2:4 type B-0 precast cement concrete louvers and jallies ( measured solid) as directed including all mouldings but excluding frameset in CM 1 :6 complete all as specified and directed.
M&L for100mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for 75mm thick PCC 1:2:4, typeB-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
M & L PCC 1:3:6 Type C-2 ( Using 40mm graded stone aggregate) as in foundation , filling, and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.
M & L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in surface channel and drain including necessary form work complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.
M & L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, cills, hold fasts, fixing of post, water trough etc. including necessary formwork (straight or curved) complete all as specified and as directed.
M&L for reinforced cement concrete 1:2:4 type B-1 ( 20mm graded stone aggregate) as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, casnopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L Precast RCC1:2:4 Type B-1 ( Using 20mm graded stone aggregate) as in landings, cover slabs ( for manhole etc) chullah hoods, chajjas , water toughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick ( Horizontal or sloping) complete all as specified and directed.
M & L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.
Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.
Dismantling posts or struts embedded in ground (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directed.
Dismantling fencing wire mesh of any size and type complete all as specified and as directed.
Supply only chain link fencing wire mesh of size 75X75mm, made with 3.15 mm dia including 5mm dia line wire conforming to IS 2721 mild steel galvanised wire complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed
S & F in repair galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to RCC / steel post etc. including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc. (each line of wire to be measured separately) complete all as specified and as directed.
Restraining and resuring including making good staple of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing complete all as specified & as directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
All as per item No.45 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .
M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer including 1 mm thick (average) wall care putty complete all as specified and directed .
M&L for complete removal of existing treatment of wall surfaces, applying two coat of cement base paint over a coat of primer including 1 mm thick (average) wall care putty complete all as specified and directed .
M & L for preparing new surfaces of wood and wood based materials of any description exceeding 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M&Lpreparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.
Taking down shutter of any description area n.exc 1 sqm each and refixing in same opening complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Taking down eaves gutter and rain water pipe ( any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc. including cleaning and refixing or removal to store ( measured overall as fixed along the centre line over fittings and acessories complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section in frame work in any position complete all as specified and directed.
M&L second class hard wood in scantlings clean sawn timber in framed work complete all as specified and directed.
M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.
S&F aluminium anodised sliding glazed window partition shutter ( double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodised aluminium shutter of section 40mmX20mmX1.10mm thick and window chowkat of section 92.00mmX29.50mmX1.20mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading , screws, handle, tower bolts and locking arrangements etc including 4mm thick sheet glass tinted quality on panel and stainless steel wirecloth or aluminium anodised wire cloth for mosquitto proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good disturbed surfaces complete all as specified and as directed.
S & F anodized aluminium push pull type glazed door shutter single leaf including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, 5 mm thick float glass tinted quality on both panels complete all as specified and as directed. (Refer Jindal Cat M-2016) Aluminium sections : 'A' series (i) Shutter top, bottom & middle rails :- 85.00 mm x 44.45 mm x 1.40 mm thick (19600) (ii) Shutter vertical rail : 47.62 mm x 44.45 mm x 1.35 mm thick ( (iii) Frame top and sides :- 63.50 mm x 38.10 mm x 1.31 mm thick (20027) Note: Door closer shall be measured and paid separately
S&F in repair solid PVC wall lining consisting of 5mm thick single sidwe prelam wood grain printed PVC sheet inclusive of solvent cement and fixed on PVC frame complete all as specified and as directed.
S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.
S&Fbox type steel window with side hung shutter both mosquito prooof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.
S&F stainless steel butt hinges 100 mm long complete all as specified and as directed.
S&F stainless steel butt hinges 75 mm long complete all as specified and as directed.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm size extruded aluminium handles, febricated type, anodised complete all as specified and directed.
S&F 100 mm size aluminium alloy handles, febricated type, anodised complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed
S&F in repair brass locking arrangement with two levers morice lock of approved make, vertical type complete all as specified and directed.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .
S&F in repair Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
S&F in repair stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
M&L in repair for seccond class hard wood weather boarding , clean sawn, plain 19/20mm thick or feather edged 15/20mm thick and fixed with 30mm laps complete all as specified and as directed.
M&L in repair 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.
S & F in repairs, mild steel PVC coated coloured 25 mm dia drapery rods for curtains including decorative end holders and brackets (wall to wall or flush to wall) for securing curtain rod,complete all as specified and directed .
Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
S & F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, as in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, dado etc. etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed light coloured/printed ceramic tiles 300x200x7mm/350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
M&L heavy duty parking tiles of size 300mmX300mmX10 to 12mm thick/ 400mmX400mmX10 to 12 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. complete all as specified & as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade including 30mm thick sand cushioning and joints filling with sand complete all as specified & as directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade including 30mm thick sand cushioning and joints filling with sand complete all as specified & as directed.
M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L for 18 to 20 mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old serviceable 20 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.
Cleaning and removing all scale and dirt etc from tanks of capacity upto 1000 litres and from mouth of circulating pipes and writing the date of cleaning on water tank with white paint complete all as specified and as directed.
S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repair, 15mm dia stop valves stop cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) complete all as specified and as directed.
S & F in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.
S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.
S&F in repair Vitreous china wash down one piece water closet pan ( EWC) Italian collection ( RENE STARWHITE) of size 59cmX 36cm X 71cm ( Pedestal pattern) complete series, white including vitreous china flushing cistern ( inbuilt with EWC) and plastic water closet seat white closed pattern with flat bottom, and cover mild steel chromium plated or aluminium hinging device including connection to drain and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make : Hindware Cat No. 92088 ( S-30).
S & F in repairs, vitreous china wash hand basin, coloured flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed
S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.
S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.
S&F in repair vitreous china urinal half stall type white ( excluding flushing cistern) including urinal spreader, PVC connection, 40mm PVC waste pipe with CP waste coupling 40mm providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc complete all as specified and directed.
S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.
S & F in repairs, health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.
S&F PVC connections 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,900mmX900mmX250mm fixed to wall with screws complete all as specified and as directed.
S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed.
S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed.
M/S MANOJ PAUL
Pusphas Construction Pvt Ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .