NOTICE INVITING TENDER FOR EXECUTION OF WORK OW TO UPGRADATION OF SUB CIRCLE OFFICE BUILDING, THANJAVUR-2022-23

Amount

Carefully dismantling and removing dead plaster from the terrace of sub circle office building at a height of 3.5mtrs collecting, conveying etc. complete

Attending Surface treatment to the terrace by laying two course of flat tiles set in lime surkhi mortar 1:1:1 using water proof compound and plastering the top surface with lime surkhi mortar 1:1:1 curing etc. Complete

Carefully removing the dislodged and decayed Mangalore tiles roof bringing them down at the height of 4mtrs stacking them properly for reuse, including removing them another and damaged wooden reepers and etc. complete

Providing and supplying of 80% of old and 20% of new mangalore tiles upper & Inner course tiles for laying over the wooden reapers etc., complete

Making the opening the brick masonry for create entrance including dismantling the floor or walls by cutting masonry and making good the damages to walls, flooring the jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.

Earthwork excavation for construction of new brick masonry wall to bifurcation of lean to roof building, collecting conveying the debris to a far off place etc complete

Laying 40mm stone jelly concrete 100m thick in Cement mortar 1:3:6 consolidating, curing etc., complete

Construction of new brick masonry wall to bifurcation of lean to roof building for creation of new room with country brick in cement mortar 1:6, curing etc. complete

Plastering the walls with cement mortar 1:6, curing etc., complete

Making and supplying and fixing of country wood panelled door & Ventilator for replacing to the damaged old doors including finishing all necessary fittings applying of primary coat etc., complete.

Provision for readymade ventilator including loading, unloading, fixing charges etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of tile 600x600mm

Provision for all plumbing, & PVC Door for creating New toilet at partially the bifurcated lean to the roof building for the exits guest room material and labour charges etc. complete

Provision for all electrical works for creating new toilet at partially the bifurcated lean to roof building for the exits guest room materials and labour charges etc. complete

Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) Conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all completed as per direction of Engineer-in-Charge.

Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks size1900mm x 44mm, wherever required. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. With Eco friendly UV coating. All complete as per direction of the Engineer-in-Charge.

Applying with two coats of OBD after cleaning the surface etc. complete.

YOGAA MANPOWER AGENCY