WBPWDEE-ICKHEDNIT02WBMSCL17-18

Amount

Supply of Microprocessor based air cooled 8.5 TR ceiling suspended ductable type Split Air Conditioner having nominal cooling capacity of 102000 BTU/hr. at ISI condition with scroll compressor & R410A/R407C suitable for operation on 415 V, ± 5%, 50 Hz. three phase AC supply. (Make:Hitachi/Voltas/Blue-Star/Carrier /Mitsubishi)

Erection and commissioning charges for the above-said 8.5 TR ton Split Air Conditioner

Supply & charging Refrigerant-R-410A/407C

Supply, installation & commissioning hard/soft Copper refrigeration pipe line complete with fitting, elbows, bends, supporting arrangement on wall.

a) Liquid Line(5/8"OD with 0.8mm thick)

b) Suction line(1-1/8"OD with 1mm thick)

Supply & fixing nitrile rubber tube Insulation on suction line copper pipe of ductable split AC.

Control copper Cabling from Condensing to Unit and control panel

a) 4 core 1.5 sq.mm cable

b) 3 core 2.5 sq.mm cable

Supply and fixing flexible double canvass connection for package ductable air-conditioners

Supply & fixing of Fusible link mechanical type fire damper

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

b) 32 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

a) Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of 8.5 TR Ductable split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. Area of the platform is 3Mtr. x 1.2Mtr.

Supply, fabrication and installation of sheet metal duct in accordance with the approve ducting, laying,drawing, including accessories like anchor fasteners, MS angle /rod for support, dampers, turning vanes etc. ( Make-SAIL)

a) 24gauge galvanized sheet

b) 22gauge galvanized sheet

Supply & fixing 9mm thick fire-retardant nitrile rubber thermal insulation for Duct (Make-Accoflex)

Supply and fixing of acoustic lining with 12.5mm thick fiberglass rigid board using shalikote primer hot bitumen and mechanically fastened, covered with 30 guage Al perforated sheet on the inner side of the duct.

Supply and fixing of Al powder coated supply air square diffuser with VCD

Supply and fixing of Al powder coated return air square diffuser without VCD

Frame work for making hanging arrangement of Ductable Indoor Units

charges for trap door made of aluminium channel & ply wood for IDU maintenance.

SKY DECORATIONS PRIVATE LIMITED

REFRICON