Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹46.7 L+₹4.2 L (9.79%)Rejected-Finance 950 1 GF DEVRAJ BUILDING NAPIER TOWN NAVEEN VIDHYABHAWAN ROAD DAYANAND SARASWATI WARD JABALPUR M P 482001 | JABALPUR | MADHYA PRADESH | 482001 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹50.9 L+₹8.4 L (19.7%)Rejected-Finance 292 GROUND FLOOR D BLOCK SAI DHAM RAJ CITY LONI BANTHLA GHAZIABAD GHAZIABAD UTTAR PRADESH 201102 | GHAZIABAD | UTTAR PRADESH | 201102 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹50.9 L+₹8.4 L (19.7%)Rejected-Finance MANEGAON DIWAN BADA KHAMARIA JABALPUR M P PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹52.0 L+₹9.5 L (22.2%)Rejected-Finance | L5 | Rejected-Finance Highest amount quoted |
Tender Value
Refer Docs
EMD Value
₹93,900
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Dhiraj Kumar, IDSE, EE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
As per BOQ
2022_MES_530459_1
8440/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
D a(i) and b(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹93,900
Yes
12 Aug 2022
16 Jun 2022
29 Jul 2022
16 Jun 2022
27 Jul 2022
1 Jul 2022
16 Jun 2022 - 23 Jun 2022
60 days
Amount
Removal of existing detoriated decayed tarfelt or any other treatement incl PCC padding, loose surface and removing the debris to a distance n exc 500 mtr depositing where directed complete all as specified.
Grubbing up any size of tree trunk including cutting of trunk portion protruding over roof, digging out roots, filling holes with epoxy mortar/ concrete as applicable and matching with existing surface and removing of unserviceable material to a distance n exc. 50 m and clearing site ®.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles.
Demolition of PCC (unreinforced) below or above ground level n exc 15 cm thickness and removing rubbish to a distance exc 50m at low laying area complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L Rendering 15mm thick on brick work or concrete surfaces of wall in CM (1:6) finished even & smooth (without using extra cement).
Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar.
M&L for fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone agg) as in filling under undulation of hauching coping padding roof top/chajja/beam etc with and incl necessary formwork complete all as specified and directed.
Supplying only Integral waterproofing compound complete all as specified and directed (ISI Mark).
M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.
M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete.
Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.
Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.
Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.
Applying two coats of bituminous base aluminium paint including preparation complete.
M&L Rendering 15mm thick on brick work or concrete surfaces of wall in CM (1:4) in two coats of 10 mm first coat (incl dubbing coat finished even and smooth witout using extra cement and 5 mm final coat both coat mixed with WPC finished even & smooth (without using extra cement).
M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling.
M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and fair & smooth without using extra cement complete all as specified and directed.
M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’.
Taking down existing loose plaster & clean rusted reinforcement and exposed concrete surface by sandblasting mechanical devices or any other estabilis-hed methods and follwing stage complete. (a) Application of two coats of mineral based polymer modified corrosion inhibiting primer Colusal MK +Colusal 25. (b) Application of two component polymer based bond coat Zentrifix HB+Natufill BB2 or mortar low permeability or guinting with guniting aid. (c) Application Application of carbonation resistant ,polymer modified reeady to ise fine mortar, Nafuquick +natufill BB2 or Zen-trifix F82+Nafufill BB2 Over the whole surface (Make : MC or equivalent).
S&F GI Tubes, `medium grade' with all fitting; laid in trenches of 40mm bore with all fitting as in spout pipe 450mm long and embeded in PCC 1:2:4 as directed by Engr-in-Charge at bottom slab level all as specified.
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and directed.
S&F Coloured Glazed ceramic tiles in vertical surfaces 350 x 250mm x 7mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface.
S&F double charged Vetrified Ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.
Same all as Item Srl No 23 above but on vertical surface with 10mm thick plaster in CM(1:4).
M&L Mirror Polishing to existing kota stone slab flooring including jointing and pointing with grey cement slurry mixed with pigment to match the shade of the slab rubbing and polishing complete.
M&L Machine cut kota stone slab flooring 18-20 mm thick over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding rubbing & mirror polishing complete.
M&L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding, rubbing & mirror polishing complete.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations including polishing.
M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 18-20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in CM 1:6.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., all as directed by Engineer-in-Charge.
Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., all as directed by Engineer-in-Charge.
Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F in repairs CP Pillar taps ( code OPP -15001 PM of Jaquar or eqv) complete all as specified and directed.
S & F in repairs for Bib taps ( Cat Part No FLR-5047 of Jaquar or Eqv), 15 mm fancy type complete all as specified and directed.
S&F in repairs Brass CP shower rose 125mm size.
S & F in repair CP wall mixer 3 in 1 system brass nuts 15 mm ( Cat Part NoFLR- 5273UPR of Jaquar or Eqv), complete all as specified and directed.
S & F in repairs CP hand shower ( Cat Part No HSH-1937 of Jaquar) with flexible tube in chrome finish (Cat Part No SHA-571 of Jaquar) and wall hook ( Cat Part No 573 of Jaquar) or Equivalent, complete all as specified and directed.
S & F in repairs for concealed Stop valves, ( Cat Part No FLR-5083NK of Jaquar or Eqv ) fixed, 15 mm complete all as specified and directed.
S & F in repairs for angle Stop valves, ( Cat Part No FLR-5053N of Jaquar or equivalent) fixed, 15 mm complete all as specified and directed.
S & F in repairs for Health faucet,( code ALD 577 of Jaquar or equivalent) complete all as specified and directed.
S & F in repairs for Toilet paper holder ( cat part No AQN -7753 of Jaquar or equivalent) complete all as specified and directed.
S & F in repairs for Towel Ring of ( cat part No CAN-1121BN of Jaquar or equivalent) complete all as specified and directed.
Towel Rack (Cat Part No AHS-1581H of Jaquar or equivalent) complete all as specified and directed.
S & F in repairs Soap Dish,( code AQN 7741 of Jaquar or equivalent) complete all as specified and directed.
S & F in repairs Glass Shelves 10mm thick & 600mm long,( code ACN 1171N of Jaquar or equivalent)) complete all as specified and directed.
S & F in repairs PVC Connection, ( code ALD805B of Jaquar or equivalent) complete all as specified and directed.
S & F in repairs Looking Mirror with PVC moulding, Jaquar or equivalent complete all as specified and directed.
S & F in repairs Decorative type pelmet rod / curtain rod 20mm dia incl finial rings, holders complete all as specified and directed. Make - Legent-3, Marble or equivalent).
S & F in repairs Bracket for Dropy Rod of decorative type of colour of PVC complete.
S & F in repairs Peg set of six Brass CP fixed to wall with PVC plugs and screw complete.
S&F in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc. incl plastic water closet seat cover and mild steel chromium plated or aluminised hinges device CP Jet complete.
S&F in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm excluding taps, waste chain & plug & porcelain stopper but including brackets.
S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets.
Cutting chases, pinning in, making good to facings for cancealed water tubing and pointing in CM(1:3) cutting not exc 10cm girth in brick wall.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Make - Nirali ModelOlympia or equivalent of Prayag.
Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make : Armstrong/Everest.
Same all as Item Srl No 60 above but fixing only.
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ®
Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises.
S&F PVC connections 15mm size with PTMT nuts of length 450mm.
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement.
S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms).
Dismantling water tanks & removing to store exc 250 & n exc 500 litres.
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity.
S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms).
Same all as Item Srl No 70 above but 25 mm bore.
Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face.
Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames).
Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames).
Taking down & Removing to Store Chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames)
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each
S & F in repair WPC double Door Frame 125x65 mm including all fitting making good after complete as directed as speicifed. Make - Rajshree or equivelent.
S & F in repair WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed. Make : Rajshree or equivelent.
S & F in repair 35 mm thick WPC Door including making good after complete as directed as speicifed . Make : Rajshree or equivelent.
S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated.
S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sash bar any numbers.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing.
S&F factory Made Solid PVC Moulded Door designer Shutter, 30mm thick solid particle board core in centre core with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the both face all as specified and directed by Engr-in-Charge.
S&F in repair Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.
S&F in repair Europa cupboard locks as complete all as specified and directed.
Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side 1mm prefemlaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.
Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.
S&F precoated steel window Rolled formed GI Section ECO 4000 (Openable double rebate window) Providing and fixing of single rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS( stainless steel) heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square bars welded to 6 x 12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer-in-Charge. Make : NCL/ASHISH INDUSTRIES.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165.
S&F weld mess, cut to length, bent to shape required & tying with & including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied & fixed complete to wood or steel members Weight per square metre n. exc 4Kg
S&F MS for hold fast complete all as specified and directed. Note : The hold fast shall be treated in two coats of tar and the the cost for the same shall be included in the quoted rate.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane.
S&F Figured glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples.
S&F Aluminium handles 150mm size, cast type, anodised.
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.
S& F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,
S& F 75 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.
S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.
S&F in repair steel plate rack size 975x750x300mm as specified and directed.
S&F Hasp & staple, safety type, brass with mild steel hinge pin including bolt to hinge plate with screws 100mm size
Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer.
Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome.
Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.
S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete.
Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia.
S&F PVC (SWR) bends any radius 110mm dia.
S&F PVC (SWR) bends any radius 75mm dia.
S&F PVC (SWR) vent cowl 75mm dia.
M&L for preparation of new plastered surface of wall and aplying two coats of OBD over 2mm thick wall care putty on wall complete all as specified and directed.
M&L complete removal of existing surface of wall and applying two coat of oil bond distamper over 2mm thick wall care putty complete all as specified and directed.
M&L for applying two coats of cement base paint, over a coat of white cement on new wall surface including preparation of surface.
M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed.
M&L for applying three coats of white wash on new Ceiling surface including preparation of surface.
Dismantling of GI corrugated/semi corrugated sheets as in roof covering complete.
S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding and in ridge to wall, fixed with self tapping screws as specified.
S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.
Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.
S&F 12 mm dia and 100 mm length anchor fastner for fixing in wall and celling as specified and drirected
S&F MS wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0.
Mild steel screw bolts (machine made) 5 mm to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long.
M&L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats on old work etc complete all as specified and directed.
M&L for applying one coat of white wash on ceiling surface including preparation of surface.
M&L one coat of synthetic enamel pait on old steel surfaces of any description, n exc 10 cms in width or girth including preparation of surfaces, complete all as specified and directed.
Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches. Ceiling roses, pendents, Regulator Socket etc complete at site and making goods disturbed surfaces of walls, floors etc.
Point wiring PVC insulated and PVC sheathed multistranded FRLS copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth incl.Provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified. Note : Rate is inclusive of cutting/chases of wall/loor/ceiling.
One light/fan/bell point controlled by one way switch.
One 5 pin socket outlet 5 Amps on independent board.
One 5 pin socket outlet 5 amps on same board.
Same all as Item Srl No 130 above in item No 2 here-in-before but wiring with 2.5 Sqmm FRLS copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet.
M&L for sub main wiring with two run of 2.5 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and 25 mm wide & 1.5 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. Note- Two wires of 2.5 Sqmm and one wire of 1.2 Sqmm and one run of PVC conduit shall be measured as one unit.
Supply and fix 16 Amps rating 2P+E Industrial wall mounted plug socket suitable for IP44 degree of protection complete all as specified and directed.
S &F Modular Switch piano single pole one way 6 amps complete all as specified. Make : Havells/Indo Asian/Anchor.
S &F Modular Socket out let 2 in one, 5/3 pin flush type single pole one way 6 amps complete all as specified. Make : Havells/Indo Asian/Anchor.
S &F Modular Switch piano single pole one way 6/16 amps complete all as specified. Make : Havells/Indo Asian/Anchor.
S &F Modular Socket out let 2 in one, 5/3 pin flush type single pole one way 6/16 amps complete all as specified. Make : Havells/Indo Asian/Anchor.
S &F Modular Electronic regulator 100/120 Watt step type complete all as specified. Make : Havells/Indo Asian/Anchor.
S & F LED light fitting 1 x 9W / 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as per specified and directed by Engineer-in-Charge. Make-Bajaj/Wipro/Crompton/Jaquar.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete as specified and directed. Make-Bajaj/Wipro/Crompton/Jaquar.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified Make BAJAJ / WIPRO / HAVELLS / CROMPTON
Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make- Havells 20 Watt LED cool day light spectra batten (White LHEXARP7IN1W020-PK1), Or Bajaj 36 w Lvora LED Batten 830337, or Philips -61018 20 W 4ft cool day light Astra line LED tube light.
Taking down carefully Ceiling fan/ Ex Fans, complete fittings at site removing Fans are diposited to E&M store for keeping in safe custody for re-use at site.
Hanging only ceiling fan (M.D supply) and connecting up including provision of cable from ceiling rose or connector to fan.
Supply & fix Ceiling fans complete with electronic type regulator and accessories 230 V, 1200 mm sweep. BEE 5 star rated. Make- Bajaj/Orient/Havells/Crompton
Supply and fixing Exhaust fan AC single phase 230 Volts of size 300mm sweep with louvre and making hole in the wall /grounting bolts and plastering work all as specified and directed. Make Havells Ventil Air DB 300 Exhaust fan (Pista Green), or Usha 300 mm aeroclean plus metal exhaust, double ball bearing, (grey) or Bajaj Bahar 300 mm exhaust fan (Metallic grey).
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. connecting up with twin core twisted flexible copper conductor cable all as directed. Make - Philips 35 Watt Cat Part No BRP030 LED35 CW MRPSU GR DX or equavalent.
S&F electric bell 230 volts Ding Dong.
S&F switch bell push modular single pole one way 5 amp.
Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings with 9 watt LED bulb glass type complete.
M&L ceiling rose, surface bakelite three terminal.
Supplying and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed.
S& F in repair MCB single pole 6 amps to 32 amps, C series complete all as specified and directed.
S& F in repair MCB single pole & Neutral 6 amps to 32 amps, C series complete all as specified and directed.
Material and labour for distribution board made out of CRCA sheet including fixing in the wall, cutting chasesgrounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings:-
MCCB 4 Pole 100 Amps 16 KA breaking capacity with thermal release 01 No (In coming).
Bus bar 300 Amp rated made out of Aluminium insulated with adhesive tape RYB & black (4 Nos).
Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire, armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 50 Sqmm 3.5 core.
Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.
Returning filling including spreading and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.
Removal of surplus/spoil on a distance n.exc 25 cm thick in soft loose soil all as specified.
Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm laid in trenches for under ground cable all as specified.
M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified.
M&L for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 50 mm bore with necessary clamps all as directed.
M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part - I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.
Supply and laying pipe galvanised, "Meddium class'', including fittings 20 mm (3/4'') bore complete all as specified and directed by Engineer-in-Charge.
Supply and laying pipe galvanised, ''Meddium class'', including fittings 25 mm (1.0'') bore complete all as specified and directed by Engineer-in-Charge.
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid in trenches for under ground cable all as specified.
Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire, armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 16 Sqmm 4 core. Make: Havells/Gloster/RR Kabel/Kalinga.
S & F new generation energy saving IP 66 street light luminiaries withlong life versatile pressure die-cast aluminium road way luminaire with high power LED 45 watt all as specified. Make- Wipro/Havells/Bajaj/ Crompton/Jaquar
S&F with fabrication street light bracket made of 40mm bore GI light grade pipe including bent to shape, cutting, hole etc required as per site complete all as specified and directed by Engr-in-Charge.
Supply and fixed Sub main wiring two single core PVC insulated cable with stranded copper conductor of size 6 sqmm fixed in and incl concealed non matalic PVC conduit including copper earth wire 6 sqmm complete as specified.
S&F switch piano flush type single pole one way 5 amps( Make:- SSK /Plaza/ Kinjal.
S&F socket outlet 3 pin 5 amps flush type.
S&F switch flush type 15 amps single pole type one way.
S&F socket outlet 3 pin 15 amps flush type.
Schedule of credit amount of Rs. 1,07,797.00 to be deducted during AOC
DOBARIA BUILDCON
Goodluck Enterprises
M/S BHATIA CONSTRUCTIONS
MAYANK CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .