REPAIR/REPLACEMENT TO JOINERY, LEAKAGE SEEPAGE AND ALLIED WORKS FOR ANUJ VIHAR UDNER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkhats or frames with shutter n exc 1.5 sqm each but without taking off shutters from the frame complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm nexc 2.00 sqm each complete all as specified and as directed.

M&L 35mm thick 2nd class hardwood glazed and skelton shutter open rabated and prepare to receive gauge etc divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etc complete all as specified and as directed.

S&F 35mm thick flush shutters solid core construction with block board core and plywood face panels,commercial type on both side complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading. And jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage s&f in opening as per specification & drg in SSR 2004 Part II complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded aggregate as in hold fasts incl necessary form work complete all as specified and as directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F steel windows with side hung shutters incl projecting type/box type hinges with steel handle and steel peg stay, complete with glazing bars complete all as specified and as directed.

Cutting of trees including cutting of trunk n.exc 15cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete of one block (irrespective of storied or quarter). Note :- Any nos of trees/shrubs in one entire block shall be considered as one unit complete all as specified and as directed.

S&F 100mm long butt hinges stainless steel complete all as specified and as directed.

S&F 100mm long butt hinges medium wt cold rold mild steel complete all as specified and as directed.

S&F 100mm long mild steel self closing hinges welded to pressed steel frame as per sample complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt extruded section complete all as specified and as directed.

S&F 125mm long extruded aluminium alloy handle complete all as specified and as directed.

S&F MS sliding door bolt 250mm long clip type stove enameled black with bright bolt not less than 12mm dia with incl min of 6 bolt and nuts four on bolt plate and two on stapple plate complete all as specified and as directed.

S&F in repair for mild steel handle for steel window left or right as per sample complete all as specified and as directed.

Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beadsin squares not exec 0.5 sqm each pane complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares exc 0.5 sqm each pane complete all as specified and as directed.

All as per Srl item No. 22 aboe but figured glass pin headed type

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avg aparture 1.18mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing of new steel surfaces of any description not otherwise described, over 10 cm width or girth & applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs 75mm long brass handles cast type as per approved sample complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed.

S&F in repairs for telescopy channels 22" long fixed in cupboards complete all as specified and as directed. Make-Hettick.

S&F in repairs 18 / 19 mm thick prelaminatd partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cubboard incl taking down old complete all as specified and as directed.

S&F in repairs 6mm thick plywood grade BWP, type BB fixed with screw to timber frame work or with adhesive in Cup board incl taking down old complete all as specified and as directed.

S&F timber frame and fixed Second class soft wood Plain fillets. square, rectangular or triangular in section clean sawn, secured with nails or brads as in frame for mosquito proofing, cub board frame and similar work ect, fixed as in repairs complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avg aparture 1.18mm and fitted with tinned tacks or galvanised wire stapple complete all as specified and as directed.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F in repairs, 25 mm bore mild steel 0.8mm thick conduit pipe with PVC ribbed lamination of required length for curtain rods including two fixing mild steel powder coated matching colour full round or half round with fixing nuts (bracket holders),& PVC golden finish end knobs(Two number for each curtain rod of any length) and PVC gold finish curtain ring @ 3 nos/feet complete all as specified and as directed.

M&L for welding in repairs in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors, ladders/ iron staircase and grills etc for upto four stoery building complete all as specified and as directed.

S&F in repairs ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

Dismantling Brick tiles or terracing tiles single layer on roofs and removal from site complete all as specified and as directed.

Demolition mud in roofs any thickness including plastering and leaping and removal from site exc 250 m but not exc 500 m and deposited complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in roof padding for providing rqd slop finishing surface even and smooth with out using extra cement complete all as specified and as directed.

M&L for screed bedding 15 mm thick plaster in CM 1:4 on roof finished even and fair using extra cement on roof with water proofing compound up to four stories bldgs WPC shall be measured and paid seperately complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

Make of APP: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.

Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

M&L for preparation of new surface of APP memebrane sheet and applying two coats of aluminium paint over a coat of primer complete all as specified and as directed.

M&L in repair cement concrete tiles 30cmx30cmx22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3 complete all as specified and as directed.

Supply only water proofing compound. Make : ISI Marked.Sika or equivalent

Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick cement plaster with redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified as directed. Notes:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.

M&L for preparation of newly plastered surfaces on external wall/ ceiling, applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon adhesive @ 1.43 litre/ 10 Sqm over and including one coat of priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and as directed.

M&L for of new plastered surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on wall surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of old treted surface and applying two coats of distemper oil emulsion over water based primer with 3 mm thick JK wall putty on wall surfaces complete all as specified and as directed. .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and as directed.

Dismantling water tanks exc.250 lit & nexc.500 Ltr complete all as specified and as directed.

Dismantling water tanks exc.500 lit & nexc.1000 Ltr complete all as specified and as directed..

Disconnecting existing tanks of capacity exc 250 ltr n.exc 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Cleaning repairing etc. measured separately).

Disconnecting existing tanks of capacity exc 500 ltr n.exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Cleaning repairing etc. measured separately).

Cleaning and removing all scale and dirt, etc. from tanks of capacity exc 250 ltr & n. exc 500 ltr and form mouths of circulating pipes, etc. complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc. from tanks of capacity exc 500 ltr & n. exc 1000 ltr and form mouths of circulating pipes, etc. complete all as specified and as directed.

S&F of 500 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F of 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed.

S&F in repairs 15mm Gun metal gate with iron wheel head screwed for iron pipe complete all as specified and as directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

Dismantling Cast iron pipe 100 dia incl all fittings of any description and in any position complete all as specified and as directed.

Dismantling Cast iron pipe 75mm dia incl all fittings of any description and in any position complete all as specified and as directed.

S&F 100 mm dia sand cast iron soil waste and vent pipe in any length with or with out ear with cement joint fixed to walls complete all as specified and as directed.

S&F 75 mm dia sand cast iron soil waste and vent pipe in any length with or with out ear with cement joint fixed to walls complete all as specified and as directed.

Refixing of 100mm dia sand cast iron soil waste & vent pipe in any position complete all as specified and as directed.

Refixing of 75mm dia sand cast iron soil waste & vent pipe in any position complete all as specified and as directed.

S&F in repair 75mm dia CI Bends or diminishing pieces or tapers complete all as specified and as directed.

All as per Srl item No. 74 above but 75mm dia with oval assess door complete all as specified and as directed.

S&F in repair Branch pieces,Tee junction with bore of pipe 100 mm, single (equal or unequal), ordinary or inverted, spigot or socket type or with parallel branches with Ovel Access door complete all as specified and as directed.

S&F in repair Branch pieces, Tee junction with bore of pipe 75 mm, single (equal or unequal), ordinary or inverted, spigot or socket type or with parallel branches with ovel Access door complete all as specified and as directed.

S&F in repair 16 mm outer dia PE-AL-PE pipe of approved make complete all as specified and as directed.

S&F in repair 32mm outer dia PE-AL-PE pipe of approved make complete all as specified and as directed.

S&F in repair 40mm outer dia PE-AL-PE pipe of approved make complete all as specified and as directed.

S&F in repair brass L-bow / Socket / T of size12x16mm fixed to PE-AL-PE pipe of approved make complete all as specified and as directed.

S&F in repair brass reducer of size12x16mm to 16x20mm fixed to PE-AL-PE pipe of approved make complete all as specified and as directed.

S& F in repairs U shaped double aluminium chaneel of size 10 mm x 20 mm x 1.5mm fixed to wooden frame including suitable rail/ rolled etc complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed complete all as specified and as directed.

S&F in repairs aluminium handles, 150 mm size, Fabricated type, complete all as specified and as directed.

S&F in repairs aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed complete all as specified and as directed.

S&F in repairs door closer aliminium (die cast) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repairs brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle including taking down old mortice lock complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and as directed.

S&F in repairs powder coated aluminium frame for partitions, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing incl (a) 150mm handle - 02 Nos (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all as specified and as directed. Note: Glass & particle board shall be paid measured and separately.

S&F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and as directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and as directed.

S&F fabricated aluminum window/ Ventilators with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminum snap beads complete all as specified and as directed. Note:- (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

M&L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note:- (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

M&L for factory made PVC cupboard frame of size 75mmx40mm with 4 mm wall thickness made out of extruded 4 mm thick plain/prelam PVC sheet of density 600/cum manufactured by an ISO 9001-2015 certified company, reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 02 Nos of 150 mm long brackets of 10 mm x 10mm MS square tubes. The door frame shall be fixed to wall using 65/100 mm long MS screws to be provided for each vertical member and minimum of 02 Nos of screw to be provided horizontal member etc complete all as specified and as directed.

M&L for factory made PVC flush type shutter of 18mm thickness consisting of panel of Hollow PVC profile of 12 mm thickness consisting of MS frame made out of MS tube of 16 gauge and size of 10 mmx 10mm metred all around the hollow profile section and lipped with 8 mm (4mmx2mm) thick and 12 mm wide on styles and rails using solvent cement. The inner panel shall consist of 4 mm plain/prelam PVC sheet of density 600 Kg/cum manufactured by an ISO 9001-2015 certified company on the front side and 2 mm plain/prelam PVC sheet using solvent cement on both side of the panel. The thickness of the shutter is edge lipped by 18 mm width x 1mm thick PVC sheet using solvent cement etc including necessary fittings, locking and fixing arranmgement ie piano hinges, locking and fixing arrangement etc as per manufacturer's specification and drawing and complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc ccomplete all as specified and as directed. Note :- (a) Pattern & design of WPC board to be decided by GE. (b) Fittings like cupboard knobs, stainless steel channel, CP plate clip hinges shall be measured and paid seperately under respective items of this schedule. (c) Locking arrangement shall be provided in cupboard shutters. The rate quoted by the tenderer shall be included for the same

S&F CP clip on hinges (Inset) complete all as specified and as directed.

S&F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.

S&F in repairs stainless steel telescopic channel of size300mm to 500mm long complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and as directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable to store and rabbish off the premises complete all as specified and as directed.

Demolition Cement concrete (unreinforced)Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 100mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and as directed.

M&L for non Skid ceramic tiles 7 to 8mm thick coloured & joint free (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed coloured ,joint free ceramic tiles in vertical surface of size 450X300X7mm thick over and including 10 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed coloured, joint free ceramic tiles in vertical surface of size 300X200X7mm thick, over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling of ceiling board/false ceiling/wall paneling any Size and thickness complete all as specified and as directed.

S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed. (Note : ceiling board shall be measured and paid seperately)

M&L 4mm thick non asbestos fibre cement building boards (E-boards) fixed or laid/inserted to aluminium frame work with screw in ceiling complete all as specified and as directed.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

SABHARWAL CONSTRUCTION CO.

A N BUILDERS

Shiv Shakti Builders

Chaudhary Constructions

M/S.M.S.Devi.Const.Co