REPAIRS TO KITCHEN, BATH, WC AND CONNECTED WORKS INCLUDING SERVICE WATER TANKS AT MADGAON UNDER GE PANAJI, GOA.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off the rubbish material complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) including floor finishes complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 40mm thick plain cement concrete 1:2:4, type B0, (12.5mm graded crushed stone aggregate) in sub floor surface finished even and fair with out using extra cement complete all as specified and as directed.

Material and labour for coloured nonskid ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles 300mmx 200mm x 6-7mm on vertical surface of walls set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles over and including 10mm thick rendering in cement mortar 1:4 as a backing coat complete all as specified and as directed.

Material and labour for 20-25mm thick machine cut cudappa stone slab, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) stone, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing type over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Supply and fix kitchen sink made of stainless steel lmm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with and including waste fitting brass CP 32 mm with long shanks and fly nuts with 32mm dia PVC waste pipe fixed in repair complete all as specified and directed.

Supply and fix kitchen sink with drainage board made of stainless steel lmm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with and including waste fitting brass CP 32 mm with long shanks and fly nuts with 32mm dia PVC waste pipe fixed in repair complete all as specified and directed.

Supply and fix wash hand basin of size 550mm x 400mm white flat back with and including 32mm brass chromium plated waste fittings with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with 32mm dia PVC waste pipe, PVC connections 15mm size with PTMT nuts of length 450mm, 15mm dia brass chromium plated Pillar tap with capstan heads including cutting for and pinning in ends of brackets with and including provision of brackets fixed in repairs complete all as specified and directed.

Fixing only wash hand basin of size 550mm x 400mm white flat back with and including 32mm brass chromium plated waste fittings, flange end bedded in red lead cement and other end fixed with 32mm dia PVC waste pipe, PVC connections 15mm size with PTMT nuts of length 450mm, 15mm dia brass chromium plated Pillar tap with capstan heads including brackets fixed in repairs complete all as specified and directed.

Supply and fix brass chromium plated mixer for mixing hot & cold water with long screwed shanks and fly-nuts, screwed down for iron pipe and fixed in repairs complete all as specified and directed.

Supply and fix grating square 150 mm size of PTMT (Minimum weight 100gms) fixed in repairs complete all as specified and directed.

Supply and fix white vitreous china squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest with and including 110mm PVC (SWR) ‘P’ or ‘S’ trap, 110mm PVC (SWR) WC connector with lip ring, connection to trap and to flushing pipe front or back inlet including trap and taking out old WC and connections etc. complete all as specified and as directed.

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement with outer dia of 75mm complete all as specified and as directed.

Supply and fix brass chromium plated shower rose 125mm size with shower arm 15mm dia, 195mm long with bend, with or without swivel joints, fixing in repairs to steel pipe or union with wall flange complete all as specified and as directed.

Supply and fix 15mm bore brass chromium plated, fancy type bib taps with capstan heads, screwed down screwed for iron pipe or for brass ferule and fixed in repairs complete all as specified and as directed.

Supply and fix 15mm bore brass chromium plated, fancy type stop valves with capstan heads, screwed down high pressure iron pipe or for union and fixed in repairs complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail 20mm dia, 60cm long between flanges fixed in repairs to walls with brackets complete all as specified and as directed.

Supply and fix PVC valve less, syphonic action type, flushing cistern, high level, white, with inlet, ball valve, float and handle including brackets and PVC high density flush pipe of 32mm dia with rubber cones for high level cistern fixed in repairs complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts, 600mm long fixed in repairs complete all as specified and as directed.

Supply and fix 20mm dia aluminium anodized curtain rod complete all as specified and directed.

Supply and fix aluminium anodized brackets for securing curtain rod complete all as specified and directed.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/ walls/ ceilings complete all as specified and as directed.

Taking up or down GI steel water tubing 20mm bore and connections including fittings from floor/ walls/ ceilings complete all as specified and as directed.

Supply and fix 15mm bore galvanized iron steel water tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore galvanized iron steel water tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Material and labour for asbestos cement two piece adjustable plain wing ridge 6mm thick c fixed with L-type or J-type or cranked hook bolts omplete all as specified and as directed.

Laying only existing asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed. Note: Old serviceable sheets retrieved from serial item No 32 shall be used.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10sqm on plan and not exceeding 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced cement concrete) set in cement mortar of 100/ 110mm dia complete all as specified and as directed.

Material and labour for concrete bed to drain pipes of 110mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in plain cement concrete 1:4:8, type D-2 using 40 mm graded aggregate complete all as specified and directed. Note: (i) Thickness of bed below the barrel of pipes shall be 10cm. (ii) Width of bed shall be outer diameter of drain pipes (not of sockets/ collars) plus 30 cm.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

Material and labour for laterite stone masonry of squared ruble, regular coursed well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Extra over laterite stone walling of squared rubble masonry, regular coursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specified and directed.

Material and labour for cement concrete type E2, 1:5:10 using 40mm graded crushed trap stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded crushed trap stone aggregate as in plinth protection, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B-1 using 20mm graded crushed trap stone aggregate as in beams, columns, chajjas, etc. complete all as specified and directed.

Material and labour for form work to foundations, footings, sides and soffits of beams, columns, chajjas, shelves, etc. for rough finished, flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15mm thick plastering in cement mortar 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10mm thick plastering in cement mortar 1:3 on fair faces of concrete surfaces of ceiling, soffit of chajja and roof projection or other similar work finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying two coat of oil emulsion distemper white or tinted over a coat of chalk whiting as preparatory to distemper including preparation of new plastered surfaces of wall complete all as specified and directed.

Material and labour for applying three coats of white wash including preparation of new plastered surface of ceiling complete all as specified and directed.

Material and labour for repairing to cracks on roof by cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 by weight complete all as specified and directed.

Material and labour for bitumastic gola, with VG-30 bitumen and coarse sand mixture. 1:3 by weight, 8cm x 8cm at the junction and side of parapet and between sheet and wall junction of roofing complete all as specified and directed.

Material and labour for cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc. with wire brushing, and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered complete all as specified and directed.

Material and labour for water proofing treatment using 3mm thick APP modified membrane consisting five layer membrane with features as specified weighing not less than 3kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4liters per sqm on surface to provide a layer of APP membrane by torching applications including sealing the overlap while torching with 150mm on length side and 100mm wide side as per manufacturer’s instructions including joints and change in directions be curved with cement mortar 1:3 mixed with SBR latex @ 200ml/bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1kg per sqm including taking down existing water proofing treatment, any type from top surface of roof slab and remove the material obtained to low lying area complete all as specified and as directed.

Material and labour for closing bolt holes or other similar holes of any size in old asbestos cement sheets by sealing with one bitumen and one plain G.I. washer on either side and 8mm dia bolt and nut, bolt not exceeding 25mm in length complete all as specified and directed.

Material and labour for applying one coat synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed.

Material and labour for applying one coat synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, not exceeding 10cm width or girth including preparation of surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, over 10cm width or girth including preparation surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, not exceeding 10cm width or girth including preparation surfaces complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing sheets complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with cross steel screws or self tapping screws as specified including taking down existing sheets complete all as specified and directed.

Supply and fix structural mild steel work in posts, roof framing for cladding, glazing and the like including special shaped washer etc. using ERW or induction butt welded tubes fixed with angle cleats and connecting plates, etc. purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, nut bolts, etc. conforming to Fe-290 (Gde E165) complete all as specified and directed.

Sagar Constructions