REPAIR TO CHAJJA, FACIA, PARAPET, PLINTH, PLASTER, CATTLE FENCING IN VARIOUS ZONE IN TALBEHAT MIL STN

Amount

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L15 mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 10mm thick as in ceiling surfaces finished even and smooth complete all as specified and directed.

Dubbing out average 15mm thick in CM 1:4 on irregular faces of walls or concrete chajjas (at any height of building) etc. including necessary scaffolding complete all as specified and directed by Engineer-in-Charge.

M&L for cutting groves in brick wall 75 mm wide and 100 mm deep and shaping horizontal face of grove and finally finished with cement mortar (1:3) with using WPC 3% of cement including all necessary scaffolding at any height complete all as directed.

M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.

M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed

M&L for preparing plastered or unplastered old surfaces on ceiling applying one coat of white wash complete all as specified and directed.

M&L for preparing of surfaces of walls, pilasters, cornices etc. by washing, rubbing down & stopping etc. and applying one coat of oil bound distemper in any color complete all as specified and directed.

Description same as per above item but applying subsequent coat of oil bound distemper on walls complete all as specified and directed.

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying one coat of cement base paint, in any color complete all as specified and as directed.

Description same as per above item but applying subsequent coat of cement base paint on walls complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying Subsequent coat of weather proof exterior emulsion paint all as specified and directed.

M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enameled complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for 15mm thick plastering in cement mortar 1:3 on the faces of brick work or concrete surfaces with out using extra cement and mixed with liquid water proofing compound in vertical and bottom surface complete all as specified and directed. Note:- Liquid water proofing solution should be provided in 150ml in 50Kg cement by weight and the water proofing solution supplied and paid separate items complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with water proofing compound as per manufactures instruction on bottom up sunken portion with proper slope towards spout/spouts. Complete all as specified and as directed.

M&L of water proofing treatment to sunken floor complete all as specified and as directed with following course of description below: (a) Applying one layer of cement slurry @ 0.688kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.253Kg/Sqm of make of approved in manufactures instruction and the allowed as cure for 4 Hours. (b) Second layer of cement slurry @0.240Kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.120Kg/Sqm and be allowed to a cure for 4 Hours. to following with max curing and testing for leak proof by ponding for 72 hours.

M&L for PCC 1:5:10 type E-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate.

M&L for 50mm dia GI pipe as in spout to drain out if any leakage occurs in the sunken portion complete all as specified and as directed

Supply only liquid water proofing compound

S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc. complete all as specified and directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair Chromium plated jet spray plated, with one meter long flexible pipe complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

S&F in repairs Fancy type chromium plated stop valve 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as spd & directed

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete al as spd & directed.

S&F in repair Stainless steel 20mm dia curtain rod including fixing brackets complete all as specified and directed.

S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete al as spd & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc. complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L Brushing neat cement slurry with 3.0kg of cement per sq. meter complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M&L for coloured Glazed ceramic tiles 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

M&L for machine cut Kota stone slab of size 550mm x 550mm flooring 20-25mm thick over and incl 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting , grinding rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) plaster & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

Demolition (carefully w/o damaging the other part of building) of RCC concrete as in chajjas, fins, parapet etc. including cutting of reinforcement to facilitate the provision of new with all necessary scaffolding at any height complete all as specified and directed .

M&L for RCC type B-1 mix (1:2:4) using 20 mm graded stone aggregate for facia, louvers, parapet , railing, chajja including all necessary scaffolding at any height complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for form work to soffits of chajja/facia/parapet for weather shade flat portion, etc. at any height complete all as specified and directed.

M&L for form work to sides of fins, facia louvers and sun breakers, chajjas, etc. at any height complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, including slightly rounded or chamfered angles and other similar work complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

M&L for Brickwork with old size sub class B bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleaning, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.

All as per srl item above but 20 mm bore

Dismantling of Barbed wire fencing or any type and size

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, benching of drain, coping, slightly rounded or chamfered angles and throating, and similar work as directed etc. complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, or beam horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

S&F MS hand rails, half round or other stock section or core for wooden hand rail, straight portion drilled and countersunk for balusters, running bars, door frame, balusters, nosing to steps including embedding in concrete land screwing etc. frame of wiremesh wind tiles for roof including securing bolts, posts, struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc., flat iron, fillets(for securing wire mesh etc. including all necessary drilling bolting welding or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F expanded metal welded steel wire fabric, made of GI hard drawn wire mesh of size 25mmX25mm, plain steel wire with hot Zinc coating , fixed to MS frame work complete all as specified and as directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

HARNAM SINGH ANIL SINGH