Urinal toilet in Busstand Road

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton hard red earth, shales murram, graveI,stoney earth and earth mixed witf small size boulders SS.20B and Sand, silt or other loose soil, wet sand,o silt not under water, light black cotton soil, sandy loam ordinary soil and t‹ full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning anc levelling the site etc.,complete Earthwork Excavation

Supplying and filling in foundation and basement with Stone Dust in layers of not more than 15cm thick well rammed waterec and compacted etc., complete complying with standard specification.- M Sand filling

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eighj coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and induding for the mixing, laying anc labour charges and all incidential charges such as water providing etc. complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using III dass ground moulded bricks of size 9”X43/8"X 2 3/4" including finishing, curing, etc. complete complying with standard specification -

Basement

Ground floor

Plastenng with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S 1306)

Painting 2 coats with approved cement paint over cement plastered wal surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc complete

Finishing the top of floor wlth Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using III dass ground moulded bricks of size 9”X43/8"X 2 3/4" including finishing, curing, etc. complete complying with standard specification -

Supplying, fabncating, erecting structural steel work for Roofing welded o bolted type using MS channels, angles, plates and round bars etc conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabncating supplying and fixing of pre painted galvalume sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be pre painted hot dipped galvalume sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified pollster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangdore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamentd designs as per the site condition and as directed by the departmental officers.

Supplying and fixing in position best approved of BIS quality PVC Waste water pipes having a pressure of 6 kg. / sq.cm induding cost of special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be indusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complete complying with standard specification.

90mm dia pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia induding cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work

25mm Gun metal Gate Valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillai tap (heavy duty) of approved make conforming to BIS specifications anc quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading whereve necessary. (Taps should be got approved by the Executive Enginee before use on the works)

SD Tap

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but exduding cost of such specials) and fixing into wal with teak wood plugs, PVC clamps and screws making holes on the waJ (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

25mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in wate supply arrangements (both in internal and external water supply arrangements

Coupler 25 mm Dia

Elbow 25 mm Dia

BEND 25 mm Dia

Tee 25 mm Dia

End Cap 25 mm Dia

Reducer 20 mm x 15 mm

Reducer 25 mm x 20 mm

Reducer Tee 20 mm x 15 mm

Reducer Tee 25 mm x 20 mm

Reducer Elbow20 mm x 15 mm

Reducer Elbow25 mm x 20 mm

Jet Nipple 25 mm Dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints induding fixing to the walls and giving connection to the PVC soil stacks dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive En neer before use on works)

PVC Elbow 75mm dia

PVC Elbow with Door 75mm dia

PVC Tee 75mm dia

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost

Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost

K ASHOKKUMAR (BID ID -1085993)