Construction of BT Road at Vijayraje Sindhia Nagar, Ajmer

Clearing and grubbing road land including uprooting rank, vegetation ,grass,bush,shrubs,saplings and trees of girth upto 300mm,removal of stumps,disposal of unserviceable material and stacking of serviceable material upto1000m from road boundry as per MoRTH Specification : 201 By Mechanical Means In area of light jungle

Providing, laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in mechanical mixer (Pug mill), carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401] with all lead

Providing, laying, spreading and compacting crushed graded stone aggregate of as per table 400-10 and 400-11 to Wet Mix Macadam specification including premixing the material with water to OMC in mechnical mixer as per approved design mix, carriage of mixed material by Tipper to site, laying in uniform layers with motor grader/F.E. Loader/paver finisher in sub base / base course on a well prepared under base and compacting with vibratory roller to achieve the desired density including lighting, guarding, barricading and maintance of diversion etc. (MoRTH specification : Clause 406) by mechanical means with all lead

Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS:8887 & manufacturer’s specifications @ 7kg/10 sqm with a self propelled or to wed bitumen pressure spraye requipped for spraying the material uniformly at specified rates and temperatures including cleaning of road surface as per MoRTH specification CIause-502,112

Providing and applying tackcoat with bitumen emulsion on the prepared surface including cleaning as per IS:8887 & manufacturer’sspecifications@2kg/10sqm with a self propelled or to wed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification CI.503,112.-------do ------------- @ 2 .75 kg /10sqm ------------------ do --------------

Providing and laying bituminous macadam on prepared surface with specified graded crushed aggregate as per table 500- 4, for base/binder course including loading of aggregates with F.E. loader and heating and mixing of stone aggregate and bitumen (including cost of antistripping compound wherever required) in hot mix plant, transporting the mixed material in tipper to paver and laying mixed material with sensor paver finisher to the required level and grade, rolling by power roller & vibratory compactor to achieve the desired density (as per job mix formula approved by the department )excluding cost of primer /tack coat [MoRTH Specification : Clause 504,112] with 3.30% bitumen with all lead. with bitumen grade VG 30 For grading-2 (layer thickness 50-75mm)

Providing and laying 20mm thick Mix Seal Surfacing on a prepared surface in a single course composed of specified crushed aggregates as per table (500-26) premixed with bituminous binder (including cost of anti-stripping compound , wherever required) with all lead of mixed material (MoRTH Specification: Clause 512,112) in a hot mix plant 40-60 TPH F.E. loader, laying with sensor paver finisher, transporting the mixed material by tipper and rolling with power roller 8-10 tonne to achieve density approved by the department, but excluding cost of tack coat. with all lead Type "A" (22 kg binder per 10 sqm) with bitumen grade VG 30

Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code)