Special repair with certain Addn/Altn to JCOs/OR Md Accn at RT line, Bhim road and Single offr Accn under GE (West) Jalandhar Cantt.

Amount

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

Roughning old concrete surface/floor by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc. complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate)as in roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.25kg per sqm incl cleaning surfaces over and including bitumen primer @0.30kg/sqm complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for 40mm thick brick tiles laid in cement mortar 1:6, 15mm thick and joints grouted flush with cement mortar 1:3 mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified

All as per item No. 7 above but except tiles complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

M&L for cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

All as per item No. 11 above but area exc 1.5 Sqm and not exc 4 Sqm each.

Taking down Shutters of any description area exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

All as per item No. 13 above but refixing in same opeining after repairing complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, as per specification & drawing. complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel with wood free EPS design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face in frame at site as per specification & drawing

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., of size 125x 60 mm complete all as specified and directed.

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock strike plate of size 105 x60mm complete all as specified and directed.

M&L for PCC type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles complete all as specified and directed.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brick complete all as specified and directed.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 35mm thick 2nd class hardwood plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 24 here in before but of gauged shutter. Note for item No. 24 & 25 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F mild steel framed work such as door/cupboard frame, guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe 290 Gde E 165 complete all as specified.

M&L for 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified and directed.

M&L for 25mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 40m dia mild steel cup board knobs fixed with nut , screw and washer of brass polished complete all as specified and directed.

M&L for Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified .

S&F continuous piano hinges mild steel bright finish of flap width 40mm complete all as specified and directed.

M & L for preparation of new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

M & L for preparation of old wood and wood based surfaces of any description over 10CM width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including removal of existing finish complete all as specified.

S&F 3mm thick ordinary quality glass sheet and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S & F Figured glass pin head type glazed with oil putty in square n exc 0.5 Sqm in each pane, 4mm thick complete all as specified and directed.

M&L for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1:18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F mild steel barrel tower bolts, 300 mm long, ISI marked stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F mild steel pressed handles of size 150mm, oval type, stove enamelled black complete all as specified and as directed.

S&F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

Supply & fix extruded aluminium alloy handles, cast type, anodised, oval type, 150mm size, all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminum alloy anodised sliding door bolt 300mm long with hasp, staple (bolt tupe and fixing of clips of sheet, fixing bolts etc. complete all as specified and as directed.

S&F floor door stopper 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Demolition of reinforced cement concrete above ground level n.exc 15 cm thick complete all as specified and as directed.

M&L for cement concrete nominal mix type A1-1:1.5:3 (20mm graded aggregate) as in slab supproted on walls, beam and columns in floor, roof, manhole cover etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exc 200mm thick (Horz or sloping) flat rough finished surface of concrete complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken portion complete all as specified and as directed.

M & L for PCC 1:3:6, type C-2, using 40mm graded stone aggregate, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring complete all as specified and as directed.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of cement complete all as specified.

M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and as directed.

S&F 32mm dia GI pipe bevelled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for 100mm thick cement concrete type D2, 1:4:8 using 40mm graded aggregate as in subbase complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and directed.

All as per description of serial item No 62 here in before but except bricks complete all as specified (old bricks dismantled under respective item shall be reused with cleaning of old brick) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1 : 4 complete all as specified and directed.

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: The rate quoted by the contractor shall be included for scaffolding, welded mesh etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)

M& L for machine cut kota stone slab flooring 18-20mm thick over and incl 15mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

All as per item No. 66 above but in skirting/risers over and including 15mm thick screed bed in CM 1:4 and taking down cement mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in benching or similar articles complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove incl brushing neat cement slurry with 3.00kg of cement per sqm. complete all as specified and directed.

S&F 20mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as per directed by EIC.

M&L for Baroda green marble (of any type) work 20 mm thick (table rubbed and polished) as in steps, cooking plat forms and the like, in cement mortar1 : 4 including painting in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite etc, incl roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (squre/rectagular) area of each tiles exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with surrounding surfaces over and including 15 mm thick screed bed in cement mortar 1:6 incl dismantling tiling, cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic jointless colour tiles 7 to 8mm thick joint free edge cut area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry in floor and pointed in colour cement to match the shade including sceed bed or bedding layer of mortar 15 mm thick 1:4 complete all as specified and directed.

All as per ser item No 74 above but as in skirting/dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed.

S & F light shade coloured vitrified ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

All as per ser item No 76 above but in skirting and dado over and including rendering/screeding including cement mortar 1:4 , 15mm thick complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick set and jointed in neat cement slurry and pointed with grey cement and pigment including cement mortar screed bed 1:4, 15mm thick complete all as specified and directed.

Dismantling of CI/RCC/PVCpipes of any description & in any position complete all as specified and directed.

Material and labour for 100mm bore sand cast iron soil, waste and vent pipe , any length with or without ears ,with cement joints fixed to walls or in floors complete all as specified and directed.

Material and labour for 75 mm bore sand cast iron soil, waste and vent pipe , any length with or without ears ,with cement joints fixed to walls or in floors complete all as specified and directed.

Material and labour for 75 mm bore CI bends complete all as specified and directed.

Material and labour for 100 mm bore C I bends ( any radious ) diminishing pieces or tapers complete all as specified and directed.

S&F traps 'P' or 'S' 100mm bore complete all as specified and directed.

S&F CI cowl of size 75mm complete all as specified and directed.

S&F CI cowl of size 100 mm complete all as specified and directed.

M & L for 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Material and labour for branch pieces 100 mm ,single( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches including inspection eye (Tikki) complete all as specified and directed.

Material and labour for branch pieces 100 mm ,double( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches including inspection eye (Tikki) complete all as specified and directed.

Material and labour for Branch pieces 75 mm ,single( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches including inspection eye (Tikki). complete all as specified and directed.

Material and labour for Branch pieces 75 mm ,double( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches including inspection eye (Tikki) complete all as specified and directed.

Material and labour for Salt- glazed stoneware gully traps , square or round mouthed type 'P' size of gully traps 150 x150mm complete all as specified and directed.

Material and labour for 100 mm CI socket (double ) collars complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes 1st quality single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S & F PVC (SWR) floor traps 75 mm size, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

S&F steel tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15mm bore complete all as specified and directed.

S&F steel tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20mm bore complete all as specified and directed.

Refixing old 15 mm bore steel tubing and connections in new or old position (walls , ceiling, roof, floors , etc.) complete all as specified and directed.

Refixing old 20 mm bore steel tubing and connections in new or old position (walls , ceiling, roof, floors , etc.) complete all as specified and directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity incl dismantling water tanks and removing to store complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks double layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 ltr capacity incl dismantling water tanks and removing to store complete all as specified and directed.

S & F ball brass valve, high pressure, with polythene float and fly nut complete, screwed iron pipe with brass ferrule and fixed 20mm bore dia of pipe complete all as specified and directed.

S&F in repair stop valve cast copper alloy fancy type CP, screwed down high pressure with capstan head, screwed both ends for iron pipes or for union & fixed in 20 mm bore pipe complete all as specified and directed.

S & F Stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore fixed in repair complete all as specified and directed.

S & F Stop cock/angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore complete all as specified and directed.

S&F in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed with iron pipe 15mm bore complete all as specified and directed.

S&F as in repairs Pillar mixer, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore complete all as specified and directed.

S&F 15mm dia pillar taps fancy type cast copper alloy with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes and fixed in repairs complete all as specified and directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets. 10 ltr capacity in repair complete all as specified and directed.

S & F plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aluminised hinging device fixed in repair complete all as specified and directed.

S & F in repairs Viterous china wash down water closet pan(pedestal pattern) white (excluding fixing bolts, flushing cistern and floor pipe) complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket complete all as specified and directed.

S&F as in repair brass chromium plated shower rose 125mm complete all as specified and directed.

S&F 4mm thick superior quality straight shelve, made of transparent toughened glass, size 60cm long complete all as specified and as directed.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed.

S&F CP/Brass peg set of six fancy type complete all as specified and directed.

S&F 32mm dia waste pipe for WHB complete all as specified and directed.

S & F in repairs brass chromium plated health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing surface complete all as specified and directed.

Supply in fixing in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plugs, washer and wastes pipe , cast iron cantilever brackets and connecting union over all size 915 x 460 mm with bowl size 410 mmx 330 mmx 160 mm complete all as specified and directed.

S & F waste coupling 32mm size of PTMT (half or full threaded) (Minimum weight 32mm - 45 gms/40mm-60gms) complete all as specified and directed.

S&F in repairs chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.

S & F as in repair pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed.

S&F bib taps chromium plated fancy type long body, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and directed.

S& F 1mm thick Stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.

M&L for 25 mm dia mild steel pipe curtain rod, powder coated fixed with & incl MS powder coated hooks/brackets and decorative finials (at both side), curtain rings (Min 5 Nos rings per running mtr of curtain road) complete all as specified and as directed.

S&F 4mm thick superior quality shelves (corner), made of transparent acrylic sheet, set of three, size 30x30cm, 25x25cm, 20x20cm complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied

S&F stainless steel soap dish complete all as specified

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing out with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note for item No. 138 & 414 : The rate quoted by the contractor shall be including of scaffolding and any other necessary arrangement for work upto triple storey.

M&L for preparing new plastered surfaces of wall and applying 2 coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of new surface of wall with birla putty filling/chalk whiting on plastered surface and applying two coat of oil emulsion distemper white or printed on walls complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall and applying two coats of cement base paint on one coat of putty filling over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coat of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.

M & L for applying white wash of two coats as in wall incl preparation of old plastered surfaces all as specified and directed.

S&F stack clamps made out of 50mmx 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall and roof all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 10 mm thick PVC decorative type colour insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I. / M.S. as per manufacturer's instruction or as site requirement complete all as specified and directed by Engr-in-charge.

S&F Stainless steel pipes of Grade SS 304, as railings 60 mm dia supplied and fixed including stainless steel seemless welding as directed.

S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

S&F powder coated, any colour, aluminum door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F powder coated, any colour, aluminum window and ventilator shutters, (minimum thickness of powder coating 50 micron),side hung type with sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F sheet glass 6.4 mm thick of any size and glazing fixed with aluminiam frame .( Exc 1.00 but n exc 1.5 sq m ) complete all as specified and directed.

S&F aluminiam hydraulic door closer rectangular design No1 universal type fixed to aluminiam doors all as specified.

S&F wicket gate including 4 lever mild steel safety lock ,lockable from outside (area of wicket gate to be only measured) complete all as specified and directed.

Material and labour for cleaning and removing sludge/soil mud, etc at blockage of sewage pipe ling of 150mm bore by rodding manually from both side at manhole/gully trap of any depth/size and flushing with water till clear flow of water is observed at the lines, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semicorrugated etc) sheet in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

Supply and fix mild steel framed work as in doors, chowkats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

S&F roof trusses (framed), trussed, as purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe-410 W (Gde-E-250) Quality B complete all as specified and directed.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down U/S submain wiring of two single core PVC cable, PVC insulated 4/6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc as directed by Engr-in-charge.

Taking down main switch/DB of any size and making good distrub surface of wall/floor complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 169 here-in-before but 3 pin socket outlet, 5 Amp on same board complete all as specified and as directed

All as per srl item No 169 here-in-before but for 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed

All as per srl item No 169 here-in-before but two way point controlled by one way switch complete all as specified and as directed

All as per item No. 169 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

All as per item No. 169 above but with 4 sqmm cable for AC on independent board, complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, two way complete all as specified and directed.

Supply and fix socket out let multi purpose 5 Amps 5 pin flush type complete all as specified.

Supply and fix switch socket combination multi purpose flush type, 6 pin 15 Amp 230/250 volts, AC with ISI marked multi pin complete all as specified.

S&F bell push flush piano type 5 amps complete all as specified and directed.

Supply and fixing single pole and neutral enclouser with two pin and earth plug and socket with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

Supply and fix city 1 new decorative wall light fixture made up of polycarbonate having base B-22 suitable for lamp type 1N x 9 watt LED lamp of same make as fittings complete all as specified and directed. Make Havells Cat part No LHDL02160099 or equivalant in makes specified in group 1 of Appendix 'B'

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

S & F stepped socketed type electronic fan regulator flush type five steps all as specified and directed

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit length.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 4.00 Sqmm cable and one run of 4.00 earth wire & 20 mm PVC conduit shall be measured as one unit length.

Supply and fix DB SPN 8 way double door for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix Isolator 63 amps DP 240 volts complete all as specified and directed.

Supply & fix MCCB TPN, 100 Amps 415 volts complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Supply & fix LED light fitting 22W (double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMILINEPLUSBS22WLED865SPCSS or equivalent of group 1 as mentioned in appendix 'B'

Supply & fix in repair 34 watt 2 x 2 LED PLUTO NEO ceiling fitting ultra modern designed, LED luminaire which provides soft light and glare free symmetrical illumination suitable for armstrong/Grid ceiling including bracket nuts, bolts, washers as required for fixing complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors complete all as specified and directed.

Supply & fixing in replacement LED street light fitting 60 W Endura pearl plus including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core incl bracket and fixing complete all as specified and directed by Engr-in-Charge Make: Havells Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent of group 1 as in Appx 'B'

S&F ding dong bell, AC 230 volts single phase complete all as specified and directed.

Supply and fix exhaust Fan 300mm sweep, 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

Taking down and refixing of serviceable fittings complete all as specified and directed.

Taking down UG cables of any size complete all as specified and directed.

Supply and laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 4 core 25 sqmm on floor/wall including lugs & fitting for fixingcomplete all as specified and directed.

Excavation in trenches in soft/loose soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for taking out/laying underground cable etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed. Note : Punned down thickness shall be measured

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm aboe the cable all as specified and directed

Removing excavated material n not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply and lay burnt bricks sub Class 'B' standard size laid across the cable in trenches as protection to the cable all as specified and directed

NATIONAL BUILDERS

M/S Kuldip Construction Co.

M/S Vinod Kumar

M/S RAJESH CONSTRUCTION COMPANY

Barmotra Infrastructures

JAGDISH KUMAR SEHGAL