REPAIR REPLACEMENT OF ROOF SHEET, FALSE CEILING, COMPOUND WALL, BARBED WIRE FENCING AND PERIODICAL SERVICE FOR MES INSTALLATION AND MAINTENANCE FOR VARIOUS B AND R NATURE WORK AT 162 MH UNDER GE DINJAN

Amount

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar in (1:4) complete all as specified and as directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for plain cement concrete (1:3:6), type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 75 mm thick cement concrete type B2, 1:2:4, using 40mm graded aggregate in floors finishing surfaces even and fair (without using extra cement) complete all as specified and as directed.

M&L for 75 mm thick PCC type C2 (1:3:6) using 20mm graded crushed stone aggregate as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar susptnded work complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding / levelling course with WPC @ 100ml per 50 Kg cement complete all as specified and as directed. Note : WPC shall be measured and paid separately under relevant item of Sch 'A').

M&L for 20mm thick rendering in CM (1:3) on fair face of brick work mixed with water proofing liquid compound on walls and roof surfaces finished even and smooth using extra cement all as specified & directed. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately complete all as specified and directed

M&L for providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, top of chajjas, coping, basement for water tank etc rounded or chamferred on edges finishing the surface even and smooth complete all as specified and as directed.

Demolition of reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work complete all as specified and as directed.

M&L for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F Mild steel TMT bars 5 To 8 mm dia., cut to length, bent to shape required, including cranking, stirrups ,bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed

Dismantling timber scantlings 40 Sqcm and over in section, in any position, unframed work complete all as specified and as directed.

Dismantling timber works in fillets, rail, post, rafter, purlins etc under 40 Sq.cm in section (unframed work), in any position complete all as specified and as directed.

Dismantling of structural steel work including doors, window, gates but excluding framed truss etc complete all as specified and as directed

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde (E-165) complete all as specified and as directed.

M&L for second class hardwood, scantlings, wrought, timber framed and fixed complete all as specified and as directed.

Taking down the chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed

Taking down the chowkhats or frames exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed

Taking down the shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed

Taking down the shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed

Refixing Shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed

Refixing Shutter of any description n exc1 sqm each complete all as specified and as directed

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F for factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame, made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

S&F 2nd class hard wood plain solid, straight chowkats and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fix complete all as specified and as directed

S&F 35mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete as specified and directed.

S&F 30mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S & F in repair for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.00 mm and fixed with stainless steel wire staples / wooden bit which ever is required at site window and door as fixed in repair as old door/window complete all as specified and as directed.

M&L for preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

S & F in repair for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.00 mm and fixed with stainless steel wire staples / wooden bit which ever is required at site window and door as in new door/window complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.00mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and as directed.

S&F aluminium anodised window and ventilator shutter of aluminium section, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary jointing cleats and aluminium snap beading complete all as specified and directed. (Thickness of aluminium section shall not be less than 1.5 mm) .Note : Glass will be measured and paid separately complete all as specified and as directed.

S&F aluminium anodised frame for door, window and ventilator with one or more rebates including joining cleat for fixing etc with power coating complete all as specified and as directed.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane in new windows complete all as specified and as directed.

S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 (Gde E-165) complete all as specified and directed

S&F for 100mm long butt hinges, medium weight, cold rolled mild steel fixed to chowkats complete all as specified and directed

S&F for 75 mm long, butt hinges, medium weight, cold rolled mild steel fixed to chowkats complete all as specified and directed

S&F for 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolts of extruded section 125 mm long complete all as specified and directed.

S&F in repairs aluminium handle 125 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F in repairs aluminium handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F for 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 2nd class hardwood small fittins such as brackets of any type, latch and hinge blocks, shapes door and window stops and the like including all necessary labours, articles n exc 200 Cu. cm each complete all as specified and as directed.

S&F 100 mm long hasp and staple, aluminum anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonry etc, including taking out embedded portion concrete, brick work, masonry work, etc and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wiremesh, any type, any size complete all as specified and as directed.

S&F for mild steel angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

Supply only chain link mild steel galvanised fencing any size or type 4 mm dia galvanized wire (100x100) mm mesh made upto matress lapped wire and laid on position / fixed on poles complete all as specified and as directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

S&F for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L for mild steel round bars of Fe 290 (Gde -E-165) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F for mild steel screw bolts of 11 to 15mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5cm long complete all as specified and as directed.

Dismantling of asbestos cement (corrugated or semi corrugated) sheets in roof coverings including ridges complete all as specified and as directed.

S&F for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts, complete all as specified and as directed.

S&F for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with 'L' type or 'J' type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed.

M&L for anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed.

S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws including two coats of distemper oil emulsion on surface of ceiling/boards etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall with cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) with WPC @ 200 ml per 50 kg of cement or all as per manufacturing instruction complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar (1:3) finished even & smooth without using extra cement complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for coloured glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square /rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in cement mortar (1:6) complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed

M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall with cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) with WPC @ 200 ml per 50 kg of cement or all as per manufacturing instruction complete all as specified and directed.

M&L for rendering 5 mm thick on ceiling in cement mortar (1:3) finished even & smooth without using extra cement complete all as specified and directed

S&F in repairs for bib taps, cast copper alloy fancy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed.

S&F for 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete as in repair (Minimum weight 15mm-90 gms) complete all as specified and as directed.

S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F for 15 mm stop valve, cast iron, screwed down high pressure with crutch or butterfly, handle screwed both ends for iron pipe of 15mm bore of pipe fixed as in repair complete all as specified and as directed.

S&F in repair for tubular towel rail, 20mm dia, D type, 60cm long brass chromium plated between flanges complete all as specified and as directed

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair pillar taps of size 15mm, chromium plated, fancy type, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for brass chromium plated shower rose, 125 mm size fixing to steel pipe or union complete all as specified and as directed

S&F in repairs PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed

S&F in repairs white vitreous china squatting pan Orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap and flushing pipe and taking out old WC & connections complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F for plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair for Vitreous China Urinals, bowl type white (excluding flushing cistern but including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete as in repair all as specified and directed complete all as specified and directed.

Supply and fixed PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sink complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed

S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm60 gms) complete all as specified and as directed.

Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 100mm bore pipe complete all as specified and as directed.

Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 75mm bore pipe complete all as specified and as directed.

S&F in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) Shoes all as specified and as directed.

S&F for 110mm bore PVC(SWR) Vent cowl all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for hardcore of broken stone or boulders guage not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8), type D2, (using 40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for 75 mm thick plain cement concrete (1:2:4), type B1, (using 20mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for chequered cement concrete tiles of size 20cmx20cmx25mm thick, as in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc) including cleaning, re-fixing the old screw threads etc complete all as specified and directed.

S&F 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed

Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-fixing the old screw threads complete all as specified and as directed.

S&F 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

S&F 500 Ltrs , 1000 Ltr & 2000 Ltr rotational moulded polythelene water storage tanks covers in repair complete all as specified and directed.

Dismantling of water tank Capacity exceeding 500 not exceeding 1000 Ltrs and removing to store complete all as specified and as directed

S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 2 0mm-210gms) complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion after preparation of new plastered surfaces of wall over a coat of clearcholle primar complete all as specified and as directed.

M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over a coat of alkali resistant priming paint including complete all as specified and directed

M&L for preparation of new plastered surface of walls etc applying two coat of oil bound distemper over a coat of clearcolle primer with 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not exceeding 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and greases spots and applying two coat of cement base paint (white or tinted) complete all as specified and as directed

M&L for preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded aggregate) as in brick or concrete wall complete all as specified and as directed.

S&F for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.

Disconnecting existing water tank of capacity 500 ltr not exc 1000ltr , recoonecting and refixing in postion including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting existing water tank of capacity 1000 ltr not exc 2000ltr , recoonecting and refixing in postion including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

M/S Karen Enterprises

M/S AUTOMOTIVE WORLD

M/S CHANDAN ENTERPRISE

R.D.CONSTRUCTION

M/S BORAH BROTHERS

R D Enterprises

M/S A K BROTHERS