RFX 5002004054. Construction of Open Store at 765 KV Narela GIS Substation.

To be entered on portal "etender.powergrid.in"

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work

Painting with aluminium paint of approved brand and manufacture to give an even shade .Two or more coats on new work

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. 16.18.1 With G.I. barbed wire

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:

Providing and fixing in position pre-moulded joint filler in expansion joints.

Specification No.: NR1/NT/W-MISC/DOM/I00/24/15494 (Rfx: 5002004054)

Authorised Dealer/Sub dealer

Authorised Representative

Any other document, authenticated by the client

Two Work

Authorised Dealer/Sub dealer

Authorised Representative

Any other document, authenticated by the client

Two Work

Turnover (in Rs. Lakh)

Any Other (Please Specify)

Company incorporated & registered in [Name of countries]

[Name of Countries]

[Name of Countries],

Item Description

Quantity proposed to be bought/ sub-contracted

Quantity Proposed to be bought / sub-contracted

Deviation

Deviation

Period in months from the effective date of Contract

Shall be as per Delivery Schedule (Completion Period) given in SCC. Hence Not Required to be Filled here.

Date of Retirement/ resignation from POWERGRID

Provident Fund Code Number

Details of Contract and date

Details of Transgression of Integrity Pact by the bidder

Estimated completion date

Projection for next five years

Description of item on which applicable

Power Grid Corporation of India Ltd.,

Northern Region–I, Regional Headquarter,

Date of Retirement/ resignation from POWERGRID

Printed Name :

Designation :

Date of Retirement/ resignation from POWERGRID

Printed Name :

Designation :

thirteen

...[Enter the Amendment]…

Bank Draft

Pay Order

Bank Guarantee

Please note that if bid validity is less than 07 (seven) months, your bid may be rejected

Applicable

The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable)

Manufacturer’s Authorisation Forms.

Bid Security

Governing Law

Terms of Payment

Performance Security

Taxes and Duties

Liquidated Damages for Delay by Contractor

Guarantee

Defect Liability

Patents and Royalties

Limitation of Liability

Settlement of Disputes

Arbitration

Purpose of Commission or gratuity

Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Duly Filled Excel Sheet of Bid Form to be uploaded in Soft Copy along with Bid.

Duly notarized (on Stamp Paper of requisite value), indicating that the person(s) signing the bid has(ve) the authority to sign the bid. In case of bid submitted by a Joint Venture of two or more firms as partners, if allowed as per stipulated Qualification Requirements in Annexure-A (BDS), bidder shall submit. Power of Attorney for Joint Venture and Joint Venture Agreement as per given format

Udyam Registration Certificate and certificate for Registration under category of Micro/Small enterpises.

Bid document cost for amount as specified in BDS- Hard copy of document related to online payment of bid document cost as indicated in BDS or Exemption certificate to be submitted along with hard copy part of bid. Copy of the payment proof may be uploaded online on the portal.

Not applicable

Not applicable

To be submitted on a non-judicial stamp paper of Rs. 100/-. (in two originals, Signed on each page by Power of Attorney Holder and duly witnessed)

Signed by CEO/Managing Director/Company Secretary/ Director/ CFO/ any of the partner in case of partnership firm/ any other officer entrusted with substantial powers of the management of the affairs of the company/firm and POA Holder

To be submitted on Firm/Company's Letterhead. Signed and stamped with company seal by a full time Director/ CEO/ Chairman-cum-Managing Director and attested/ notarized by a Magistrate/ Notary for correctness of all the information/details/data/ documentary evidences etc. as submitted by the bidder are correct.

On Firm/Company's Letterhead

On Firm/Company's Letterhead

To be submitted on a non-judicial stamp paper of Rs. 100/-.

Not applicable

In support of meeting the qualifying requirements (QR) such as copy of letter of award/ work order, completion certificate, copy of audited balance sheet and audit reports for five years etc., shall be uploaded by the bidder along on the portal as part of technical bid