8573/GWL/E8 REPAIR AND MAINT OF INTERNAL WIRING AND CONNECTED WORKS IN THE AREA OF FD BTY LINES UNDER AGE E/M UNDER GE GWALIOR

Amount

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLS having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC condui t( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:- Make of wire : Finolex, Plaza, Polycab & Make of conduit : Anchor, Modi, Presfit.

One light point controlled by one switch.

One fan point controlled by one switch.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One light point controlled by two, two way 5 A swtiches.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 2 here in before but point wiring with 2.5 sqmm FRLSmultistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 1.5 sqmm FRLS PVC insulated multi strand copper conductor cable as continous earth wire.

M & L for surface point wiring with 1.5 sqmm (Nominal Area) PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including PVC conduit of medium duty of size not less than 20mm dia with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall including metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth dolly complete all as specified :- Make of wire : Finolex, Plaza, Polycab & Make of conduit : Anchor, Modi, Presfit.

For one light point controlled by one switch

For one fan point controlled by one switch

For one 5 pin socket out let 5 amps on same bd complete.

For one 5 pin socket out let 5 amps on independent board complete.

All as per item No 4 here in before but with cable FRLS 2.5 sqmm (nominal area) multi stranded copper wire unsheathed for one 5 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm FRLS copper conductor connecting to common earth and earth dolly complete.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F switch piano, flush button single pole two way 5 Amp complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F switch socket combination, flush type, 2 in 1 5 Pin 5 Amps complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F switch socket combination, flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F bell push flush type, 5 Amps complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F electronic step rotary type fan regulator of 100 Watt capacity 240 volts, AC 50Hz complete all as specified and directed. Make:- Legrand/Havells/Cona.

S&F anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete. Make:- Legrand/Havells/Cona.

S&F Ultra bright LED Tubelight fitting of LED 22 w incluing reqd length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make :- Halonix/Wipro/Havells.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Make :- Halonix/Wipro/Havells.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

S&F Sheet metal enclosure MCB DB, double door , 4 way TPN, 415 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 4 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed. Make :- Legrand/Siemens/Scheider.

S&F, MCB TPN 63 Amps, 240 volts 'B' series 25 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. Note :- Make of MCB/MCB DBs :- Schnedier, Havells, Legrand.

S&F in repair angular Lamp holder, PVC/polycarbonate type with back plate suitable for angular fittings complete.Make:- Legrand/Havells/Cona.

S&F in repair Ultra bright LED Tubelight fitting of LED 22 w incluing reqd length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make :- Halonix/Wipro/Havells.

Supply & fixing in repair switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal. Make:- Legrand/Havells/Cona.

Supply & fixing in repair switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal. Make:- Legrand/Havells/Cona.

S&F, in repair MCB TPN 63 Amps, 240 volts 'B' series 25 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, in repair MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, in repair MCB SPN 25 to 32 Amps, 240 volts 'B' Series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB in repair SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. Note :- Make of MCB/MCB DBs :- Schnedier, Havells, Legrand.

Supply and fixing of 1100 volts grade heavy duty electric cable PVC insulated Al conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection of two single core cables of size 6 Sqmm complete incl taking down old unsv one all as specified and directed Make of cables :- Polycab, Finolex, KEI.

-do- but size of cable is 10 Sqmm

-do- but size of cable is 16 Sqmm

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

M/S SANTOSH CONSTRUCTION CO

M/s raj construction

GURU KIRTH BUILDERS