Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.5 L+₹2.0 L (6.90%)Rejected-Finance | L2 | Rejected-Finance Not Found lowest | |
| 3 | L3₹32.8 L+₹3.3 L (11.3%)Rejected-Finance | L3 | Rejected-Finance Not Found lowest |
Tender Value
₹33.6 L
EMD Value
₹67,200
Closing Date
1 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Nitin Bisht
GE Basoli PO Lakhanpur Distt Kathua (JK) 184152
GE/BAS-42/2024-25 Provn of car garage for building No P-01, bathroom toilet urinal for Gd post, sewage line septic tank soakage well at certain location and addn/altn of bldg No T-32 at Basoli station under GE Basoli.
2024_MES_670693_1
GE/BAS-42/2024-25
Open Tender
Civil Works
Item Rate
120 days
Basoli Station under GE Basoli
As per tender docs
8 documents required · 8 mandatory
₹500
GE Basoli
₹67,200
Yes
11 Oct 2024
3 Sept 2024
3 Oct 2024
3 Sept 2024
1 Oct 2024
17 Sept 2024
Amount
Excavation in trenches in any type of soil n.exc 1.50m wide and n. exc 1.50m in depth for foundation of pole/stay and laying of UG Cable and other and getting out complete all as specified and directed.
Surface excavation in any type of soil n. exc.30cm deep and averaging 15cm deep and getting out complete all as specified and directed.
Surface dressing in any type of soil n.exc.15cm deep and getting out complete all as specified and directed.
Removal of excavated (soil) material to a distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Removal of excavated (soil) material to a distance exceeding 250metres but not exceeding 500metres and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified and directed
M&L cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quions, arches, pillar complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including flush pointing with same mortar as the work proceed complete all as specified and directed.
All as per item No 09 above but except brick complete all as specified and directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 including flush pointing with same mortar as the work proceed complete all as specified and directed.
All as per item No 11 above but except brick complete all as specified and directed.
M&L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces with 1:6 CM on internal faces of wall, finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.
M&L Rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement complete all as specified and directed
M&L Rendering 15mm thick on brick or concrete surface in CM 1:4, finished even and smooth with out using extra cement including mixing of water proofing compound complete all as specified and directed (WPC shall be paid seperately as supply only)
M&L Rendering 5mm thick on fair faces of concrete surfaces with CM 1:3 on ceiling surfaces etc., finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases of columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregates as in beams, chajja, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed.
Steel Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.
Steel Form work to sides and soffits of floor/roof beam for rough finished flat surfaces of concrete complete all as specified and directed
Steel Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed
Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.
Steel Form work to edges of concrete flat, treads, window cills concrete railings, openings in concrete walls, floor & roofs n.exc. 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work all exc. 20 cm wide for rough finished flat surface, complete all as specified and as directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.
M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
Spreading and leveling of earth in layers not exc 25cm thick incl well ramming, watering complete all as specified and directed.
M&L Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . Exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 15 mm thick screed bed in CM 1:4. all complete all as specified and directed
M&L Glazed ceramic coloured tiles of size 450x300X7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in CM 1:4 .complete all as specified and directed.
M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab complete all as specified and directed.
Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc. complete all as specified and directed.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm complete all as specified and directed.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.
Dismantling structural steel work as in doors, gates of any description but excluding frame truss complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Roof trusses(framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, Tee, angle, channel, flat section) including distance pieces, cleat etc complete all as specified and directed.
S&F For steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and directed.
S&F plain Sheet glass 4.00 mm thick glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm, complete all as specified and directed
S&F Solid PVC Door Frame (Single rebated) of size 60mm x 30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face & 2mm plain colour PVC sheet on back face supplying & fixing at site as per specification & drawing complete all as specified and directed.
S&F Stainless steel Butt hinges,100 mm size complete all as specified and directed.
S&F AluminIum anodised barrel tower bolt of size 200mm extruded section complete all as specified and directed.
S&F Extruded aluminum alloy handles of size 150mm fabricated type anodized complete all as specified and directed.
S&F 300 mm long aluminium anodised, sliding door bolt with hasp, staple (bolt type dia not less than 16 mm) including fittings and fixtures , ISI marked, complete all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S & F floor door stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F Pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate size of frame 105X60mm complete all as specified and directed.
S&F Pressed steel frame for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate size of frame 125X60mm complete all as specified and directed.
PCC 1:3:6 type C-0 using 12.50 mm graded crushed stone aggregate as in back filling of pressed steel door frames and hold fast complete all as specified and directed
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F For Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed.
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); to chowkat complete all as specified and directed.
M&L forMachine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
M&L for Machine cut kota slab skirting 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed.
M&L Hardcore of broken stone or boulders of gauge n. exc. 63mm, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 75 mm thick PCC M-15(Nominal mix) type B-1 using 20 mm graded crushed stone aggregate in plinth protection etc. laid in alternate bays finished even and fair w/o using extra cement complete all as specified and directed.
M&L For Preparation of new plastered surface and applying two coats of cement base paint complete all as specified and directed.
M&L preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
M&L Preparation of old plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces over and including 1mm thick wall care putty complete all as specified and directed.
M&L Preparation of old plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces over and including 1mm thick wall care putty complete all as specified and directed.
M&L Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall, chajja , fascia, face of column, beam etc and applying two coat of weather proof exterior emulsion(Apex) over a coat of primer using smart periodical technologycomplete all as specified and directed.
M&L for complete removal ofexisting treatment including washing, rubbing down with sand paper and stopping of painted surfaces and preparation of old plastered surfaces of wall, chajja , fascia, face of column, beam etc and applying two coat of weather proof exterior emulsion(Apex) using smart periodical technologycomplete all as specified and directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) not exc 30cm high of any description not exc 0.2 Sqm with paint complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for roof treatment with the following specification - applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 15mm thick screed in CM 1:4 and all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
Supply & Fix 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.
Supply & Fix 20mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.
S&F 125/110mm bore PVC (SWR) gully trap plain including jointing with solvent cement complete all as specified and directed
Dismantling of PVC(SWR)/CI/Concrete pipe, drain pipes any type including concrete bed, internal dia of pipe 100/110mm and taking out from trenches complete all as specified and directed.
Dismantling of PVC(SWR)/CI/Concrete pipe, drain pipes any type including concrete bed, internal dia of pipe 150mm and taking out from trenches complete all as specified and directed.
Dismantling of PVC(SWR)/CI/Concrete pipe, drain pipes any type including concrete bed, internal dia of pipe 200mm and taking out from trenches complete all as specified and directed.
S&F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed.
S&F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed.
M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 100/110 mm dia pipe complete all as specified and directed. .
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.
S&F 110mm dia PVC (SWR) 'P' traps, including jointing to waste pipe with solvent cement complete all as specified and directed.
Taking down eaves gutters, CI pipes and PVC rain water pipe/vent pipe (any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc as on wall complete all as specified and directed.
S&F PVC (SWR) of pipe 75 mm dia fixed on walls complete all as specified and directed .
S&F PVC (SWR) of pipe 110 mm dia fixed on walls complete all as specified and directed .
S&F PVC (SWR) bends of (any radius) with access door of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends of (any radius) with access door of 110 mm bore complete all as specified and directed.
S&F 110mm dia bore PVC SWR junction single (Single T) equal or unequal complete all as specified and directed.
S&F 75mm dia bore PVC SWR junction single (Single T) equal or unequal complete all as specified and directed.
S&F 110mm PVC(SWR) reducer complete all as specified and directed.
S&F 75mm PVC(SWR) vent cowl complete all as specified and directed.
S&F CP Soap dish fancy type complete all as specified and directed.
S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. Cat Part No: F7020111AB or equivalent in Jaquar/Prayag/Kohler.
S&F 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.
S&F 15mm stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type complete all as specified and directed .
S&F 15mm CP center hole basin mixerwithout popup waste system with 450mm long braided houses for mixing hot & cold water screwed down for iron pipe complete all as specified and directed .Cera Cat Part No: QTF2006461 or equivalent in Jaquar/Prayag/Kohler.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed .Cera Cat Part No: Congo B1010112 or equivalent in Jaquar/Prayag/Kohler.
S&F Wash basin under counter type, white colour with fixing accessories of size 560 x 470 x 190mm oval shape, including CP waste coupling and PVC waste pipe.complete all as specified and directed .Cera Cat Part No: S2030104 or equivalent in Jaquar/Prayag/Kohler.
S & F Vitreous china Urinal, bowl type (back or corner wall type), half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; and urinal spreader with self closing angle cock pressmatic for urinal with wall flange and 200mm connecting pipe with brackets, flush pipe, grating and Union for discharge pipe, waste coupling and waste pipe of 32mm dia (Exclusive of fixing supply pipe to self closing angle cock, trap and waste pipe complete all as specified and directed. Cera Cat Part No: S4020103, F8070201,F9020203 or equivalent in Jaquar/Prayag/Kohler.
S&F stainless stell peg set of four hooks of size 50mm to 60mm complete all as specified and directed.
S&F brass chromium plated towel ring complete all as specified and directed.
S & F Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed. Cera Cat Part No: COVYNA S3010109 or equivalent in Jaquar/Prayag/Kohler.
Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 80mm thickness with grey cement and pigment, M-35 grade over and including 50mm thick layer of sand cushioning complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade over and including 50mm thick layer of sand cushioning complete all as specified and directed.
M&L 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded crushed stone aggregate in,sub floor,sub base etc. finished even and fair w/o using extra cement complete all as specified and directed.
M&L 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in,sub floor,sub base etc. finished even and fair w/o using extra cement complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etccomplete all as specified and directed.
Add or deduct for each 25mm girth thereof over or under 30cm complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate in, floor, finished even and fair w/o using extra cement complete all as specified and directed.
M&L 50 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in,sub floor,sub base etc. finished even and fair w/o using extra cement complete all as specified and directed.
M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 200 mm dia pipe complete all as specified and directed.
Material and labour for Reinforced concrete pipes 200 mm bore, class NP-3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
M&L concrete bed to drain pipes including benching under and haunching in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150 mm dia pipe complete all as specified and directed.
Material and labour for Reinforced concrete pipes 150 mm bore, class NP-3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia of pipe complete all as specified and directed.
Cleaning of blocked sewage drain pipe line of 100/150/200mm dia and removing all sludge and foreign material manually or mechanically as required etc complete from the pipe line and making it serviceable free flow of sewage complete all as specified and directed.
Taking down cement plaster on brick or concrete surface of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete of any description. complete all as specified and directed .
M&L for Precast cover slab, grey steel fiber reinforced concrete medium duty solid cover without frame of minimum thickness 70mm and of size as approved or required at site complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in, coping Kerb stone, steps and other similar bands plinth courses, string courses, lacing courses, copings, kneelers, appex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Supply only integral Water Proofing Compound. complete all as specified and directed.
M&L for RCC 1:2:4 type ‘B-1’ (using 20mm graded crushed stone aggregate) as in precast manhole cover and cover slab for septic tanks including necessary form work and moulds etc and set in cement mortar 1:6, complete all as specified and directed.
M&L for Construction of septic tank with cover slab RCC M-25 (Design mix) for `10 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil a directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5
M&L for Construction of septic tank with cover slab RCC M-25 (Design mix) for `50 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil a directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5.
M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 1.80 m dia x 3.0 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5.
M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 3.00 m dia x 4.50 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5
S&F 1.25mm thick lathe push pull/manual type steel rolling shutter with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer and two coat of synthetic enamel paint complete all as specified and directed.
S&F Safety lever lock mild steel with 4 levers for rolling shutter complete all as specified and directed.
S&F ball bearing for rolling shutters complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing AC sheet complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down existing AC sheet complete all as specified and directed.
S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips. Make : M/s Everest, M/s Saint gobain, M/s Boral.
M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe 410-O OR Fe 310-O complete all as specified and directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm bore pipe complete all as specified and as directed.
Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.
Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.
All as per item No 146 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.
Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.
Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.
Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type complete all as per specified and directed..
Supplying & Fixing socket outlet 6 amps 5 pin flush type, 240 volts, complete all as per specified and directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.
S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.
S&F in replacement LED tube light fitting 20w,230v, including LED 4 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.
S&F 25 Watt LED street light/Bldg security light fitting of IP-66 protection, pressure die cast aluminum housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including medium grade GI pipe 40mm dia for bracket for fixing on pole/wall connecting with three core conductor cable of size 1.00 sqmm complete all as per specified and directed.
S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.
M&L for flame proof point wiring for with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through in and including new ERW metallic steel concealed conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in flame proof bend, elbow, etc. for light point, fan point etc. complete all as per specified and directed.
Supply and fixing LED light fitting 1x30Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size.complete all as per specified and directed.
Supply and fixing ceiling fan flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as per specified and directed.
Supply and fixing totary type on/off switch flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size.complete all as per specified and directed.
Supply and fixing Fan rebulator flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size.complete all as per specified and directed.
S&F in replacement LED tube light fitting 18w, 230v, including LED 4 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.
S&F in replacement sheet metal powder coated versatile double door 08 way. SPN fitted distribution board for PROTECTION ip-43, IK-09 with copper bus bar rated 200amps, neutral link, earth bar complete all as specified and directed.
S&F in replacement sheet metal powder coated versatile double door 04 way. SPN fitted distribution board for PROTECTION ip-43, IK-09 with copper bus bar rated 200 amps, neutral link, earth bar complete all as specified and directed.
S&F MCBs single pole and neutral (SPN)/isolator 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
S&F MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
S&F MCBs single pole 6-32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
S&F aluminium servicewire 10 Sqmm 2 core, unarmed, 50 HZ, 230volt, AC supply complete all as specified and directed.
Supply and fix 6sqmm 2 core, service wire, aluminium conductor, PVC sheathed, 1100 volt grade with GI pipe 40mm dia as service bracket complete all as specified and directed.
Supply and fixing exhaust fan plastic body AC single phase 230 v of size 200mm sweep with blades frame and louvers complete all as specified and directed..
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick burried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)
M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn in and including rigid PVC conduit concealed heavy grade size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in sheet metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm complete all as per specified and directed.
All as per item No 172 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as per specified and directed.
All as per item No 172 above but for one 3 pin 5 amps socket outlet on independent board with other switchs complete all as per specified and directed.
S&F modular switches 6 amps single pole one way as per sample complete all as specified and directed.
S & F step type electronic fan regulator 5 steps, 120 W-2module suitable for 240 volt AC complete all as specified and directed.
S&F modular socketes out let 6 amps 5 pin as per sample complete all as specified and directed.
S&F modular white cover platewith frame 8 modular complete all as specified and directed.
S&F modular white cover platewith frame 6 modular complete all as specifed and directed.
S&F modular white cover platewith frame 4 modular complete all as specifed and directed.
Taking down ceiling fan fan and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, reassembling the ceiling fan complete after greasing, oiling, testing the same & making the fan serviceable of any sweep and re-hanging and connecting up to the ceiling rose complete all as specified and directed.
Supply and fixing SS encloser version Change over switch, three phase, 4 wire, 415Volts, 40 Amp cushioning complete all as specified and directed. Havells cat part No: IHCCFE0040 or equivalent in L&T/Siemen/Legrand.
Ashoka Engineers (BID ID -3111763)
M/S S KUMAR & CO (BID ID -3111029)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .