MPSPL REROUTING JOBS AT KALAMBOLI JUNCTION

HDD CROSSINGS — HDD CROSSINGS: COMPLETE WORK OF ANY CROSSING (BETWEEN THE LIMITS AS DEFINED IN DRAWING-DETAILED CONSTRUCTION DRAWINGS SHALL BE PREPARED BY THE CONTRACTOR DULY APPROVED BY OWNER/PMC) BY HDD METHOD INCLUDING "RECEIVING AND TAKING OVER" OWNER SUPPLIED THREE LAYER PE/PP COATED LINE PIPES FROM OWNER'S DESIGNATED PLACE TO ISSUE/DUMP SITE(S) AND TRANSPORTATION TO CONTRACTOR'S STOCK YARD/WORK SHOP/WORK SITE INCLUDING ALL HANDLING, LOADING, UNLOADING, ALIGNING ETC. SUPPLY OF ALL CONTRACTOR SUPPLIED MATERIAL INCLUDING CONSUMABLES, DEPLOYMENT OF MANPOWER, EQUIPMENT, OTHER RESOURCES TO WORK SITE(S) AND ACQUIRING THE REQUIRED LAND FOR STORAGE., EXECUTION OF, BUT NOT LIMITED TO, FOLLOWING WORKS IN ACCORDANCE WITH SPECIFICATIONS AND INSTRUCTION OF ENGINEER-IN-CHARGE AND AS PER ALL PROVISION OF CONTRACT DOCUMENT. EACH TYPE OF X-ING HAS ALSO TO BE FULFILLED. IN CASE OF ROAD CROSSING, DRILLING TO REQUIRED DEPTH FROM TOP OF ROAD INCLUDING MAINTENANCE OF DRILL HOLE IN ALL TYPES OF STRATA, ALL DEPTH TO ACCOMMODATE THE PIPELINE AND CS CONDUIT FOR OFC LAYING AT ALL CONDITIONS ENCOUNTERED DURING ROAD CROSSING BY APPROVED HDD METHODS FOR PROVIDING MINIMUM COVER SPECIFIED IN CODE/SPECIFICATION OR THE ACTUAL DEPTH AS DECIDED BY CONCERNED AUTHORITY, WHICHEVER IS MORE. LAYING OF THE PIPELINE (FOR WATER BODY, ROAD AND RAILWAYS CROSSING) BY THE APPROVED HDD METHOD ACROSS THE CROSSING INCLUDING, STRINGS PREPARATION OF PIPES, WELDING, TESTING, 100% NDT BY AUT/RADIOGRAPHY BY X-RAY, WELDING REPAIR AND RETEST, COATING OF FIELD JOINTS WITH SPECIAL TYPE DIRAX HEAT SHRINK SLEEVE OR EQUIVALENT (INCLUDING SUPPLY OF COATING MATERIAL) AND REPAIR OF PIPELINE COATING WITH SPECIAL PERP-60E REPAIR PATCH OR EQUIVALENT MATERIAL (INCLUDING SUPPLY OF REPAIR PATCH) AS PER SPECIFICATION, PRE-HYDROTEST OF COMPLETE STRINGS MADE FOR CROSSING ETC. STRING PREPARATION AND LAYING OF 6 INCH CS CONDUIT FOR OFC BY HDD METHOD, WELDING ETC. SUPPLY, FABRICATION AND CONSTRUCTION OF PROTECTIVE FENCING AS REQUIRED. BACKFILLING OF THE DITCH/ TRENCH INCLUDING RESTORATION AND CLEAN-UP OF AREA, SAFE DISPOSAL OF DRILLING FLUID & WASTE ETC. TO THE SATISFACTION OF ENGINEER-IN- CHARGE AND/OR AS DIRECTED BY CONCERNED AUTHORITY. PREPARATION OF AS-BUILT DRAWINGS AND OTHER RECORDS ETC., ALL OTHER WORKS NOT SPECIFICALLY LISTED HEREIN, BUT REQUIRED AS PER DRAWINGS, SCOPE OF WORK, SPECIFICATIONS, STANDARDS PROVISION OF CONTRACT DOCUMENT, CALCULATIONS, AND INSTRUCTION OF ENGINEER-IN- CHARGE, LEADING TO SUCCESSFUL COMPLETION OF WORKS.

LAYG OF CS PIPELINE — LAYING OF CARBON STEEL PIPELINE: LAYING OF 14 INCH DIAMETER CARBON STEEL PIPELINE AND LR BEND (API 5L GRADE X46 TO X56, ERW 6.4 TO 9.5 MM WT, EXTERNALLY COATED WITH 3 LPE/3 LPP/HEAT SHRINK SLEEVE) IN UNDERGROUND CONDITION AT ALL DEPTH AND ALL TYPES OF STRATA.

SPLY AND INSTLN OF PIPE — SUPPLY AND INSTALLATION OF 20 INCH DIAMETER CASING PIPE: SUPPLY AND INSTALLATION OF 20 INCH DIAMETER X 9.5 MM WT CARBON STEEL CASING PIPE CONFORMING TO IS 3589 FE 410 GRADE OR SUPERIOR IN UNDERGROUND CONDITION AT ALL DEPTH IN ALL TYPES OF GROUND STRATA.

WLDG PROCEDURE — WELDING PROCEDURE QUALIFICATION-SCOPE OF JOB INCLUDES FABRICATING TEST PIECES, ARRANGING HPCL APPROVED THIRD PARTY AGENCIES, WELDING PROCEDURE QUALIFICATION SHALL BE CARRIED OUT IN ACCORDANCE WITH THE APPLICABLE REQUIREMENTS OF ASME SEC. IX LATEST EDITION/API AND/OR OTHER APPLICABLE CODES AND THE TECHNICAL SPECIFICATIONS. THE CONTRACTOR SHALL SUBMIT THE WELDING PROCEDURE SPECIFICATION IMMEDIATELY WITHIN ONE WEEK AFTER THE RECEIPT OF THE ORDER. SCOPE OF JOB ALSO INCLUDES ARRANGING APPROVED THIRD PARTY AGENCY, DESTRUCTIVE TESTING OF SAMPLE AT ANY APPROVED LAB, COMPLETE SET OF TEST RESULTS IN THE FORMAT AS PER QW-483, ASME SECTION IX APPROVED BY THE THIRD PARTY AGENCY TO BE SUBMITTED. PARTY TO DO THE ADDITIONAL WELDERS QUALIFICATION AT THEIR OWN EXPENSE. CONTRACTOR TO QUOTE RATE ON LS BASIS.

DISMANTLING OF HARD ROCK 1097-VASHI-PSPL — DISMANTLING OF HARD ROCK FOR PIPELINE TRENCH AND DISMANTLING OF HARD ROCK ENCOUNTERED DURING CARBON STEEL PIPELINE LAYING IN UNDER GROUND CONDITION.

DISMAN OF HARD ROCK AND — DISMANTLING OF HARD ROCK AND RCC FOR PIPE TRENCH AND OTHER SITE WORK INCLUDING RESTORATION WORK.

R&M - DEFECTED — REPAIR OF DEFECT IN EXTERNAL CORROSION COATING OF LINE PIPE AND PIPELINE ATTRIBUTED TO OWNER. SCOPE INCLUDES BUT NOT LIMITED TO SUPPLY OF ALL COATING REPAIR MATERIALS COMPATIBLE TO 3 LPP/LPE AS PER THE REQUIREMENTS OF THE RELEVANT SPECIFICATION (HTLP 60 OR EQUIVALENT), SUPPLY OF ALL CONSUMABLE, UTILITIES, EQUIPMENT, AND ALL MANPOWER REQUIRED, PIPE CLEANING AND SURFACE PREPARATION, REPAIRING OF COATING DEFECTS IN COATING AND TESTING INCLUDING ALL HANDLING, ETC. FOR LINE PIPE, PERFORMING ALL WORK NECESSARY FOR THE COMPLETION OF THE WORK STRICTLY IN ACCORDANCE WITH THE RELEVANT SPECIFICATION AND INSTRUCTION OF ENGINEER-IN- CHARGE. THIS RATE SHALL BE APPLICABLE FOR COATED PIPE SUPPLIED BY HPCL DURING HANDING OVER OF PIPES AND FOR REPAIR OF COATING ON EXISTING PIPELINE. DETAIL OF JOB AS PER SOQ ITEM DETAIL AND TENDER SPECIFICATION.

FILLING OF SAND PRE — SOFT SOIL/SAND FILLING (ROCK AREA): PRE PADDING PIPELINE IN TRENCH 150 MM AND 200 MM POST PADDING USING SOFT SOIL/SAND FILLING AS DIRECTED BY THE EIC; DETAIL SPECIFICATION AS GIVEN INCH TENDER DOCUMENT.

SPLY AND LAYG OF OFC — SUPPLY AND LAYING 24 CORE OFC CABLE: SUPPLY AND LAYING OF 24 CORE, OUTDOOR, LOOSE TUBE ECCS ARMOURED, 9/125 ?M, OS2 TYPE LSZH FIBRE CABLE. LAYING INCLUDES LAYING THROUGH, SUPPLIED HDPE PIPE, TRENCH, OPEN STRUCTURE ETC. ALUMINUM CLAMPS AND SS NUT BOLTS TO BE PUT WHEREVER CLAMPING IS REQUIRED.

Supply and laying of OFC Duct — Supply and Laying of OFC duct as per specifications mentioned in Tender document.