Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹45.7 L+₹3.8 L (9.11%)Rejected-Finance A 2 206 SAI DWARKAMAI NIBM ROAD KONDHWA PUNE 411 048 | PUNE | MAHARASHTRA | 411048 | L2 | Rejected-Finance Bidder not quoted L1 rates | |
| 3 | L3₹49.4 L+₹7.5 L (17.9%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L3 | Rejected-Finance Bidder not quoted L1 rates | |
| 4 | L4₹49.9 L+₹8.0 L (19.1%)Rejected-Finance 401 SHRINAT HEIGHTS HADAPSAR ROAD SURVEY NO 97 MANJARI BK HAVELI PUNE 412307 | PUNE | MAHARASHTRA | 412307 | L4 | Rejected-Finance Bidder not quoted L1 rates | |
| 5 | L5₹50.4 L+₹8.5 L (20.2%)Rejected-Finance | L5 | Rejected-Finance Bidder not quoted L1 rates |
Tender Value
₹69.5 L
EMD Value
₹1.3 L
Closing Date
15 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COMMANDER WORKS ENGINEER PUNE
HEADQUARTERS COMMANDER WORKS ENGINEERS GEN CARIAPPA MARG, PUNE-411 001
85888 SPL REPAIRS TO BLDG NO. NP-24 SINGLE NURSING OFFRS ACCN AND NP-27 QTR FOR MATRONS AT AICTS PUNE UNDER GE SOUTH PUNE
2024_MES_637589_1
85888 CWE PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUENTS
8 documents required · 8 mandatory
₹1,000
GE SOUTH PUNE
₹1.3 L
Yes
27 Apr 2024
15 Jan 2024
17 Feb 2024
15 Jan 2024
15 Feb 2024
9 Feb 2024
Amount
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantiling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and directed.
M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed.
M&L for Preparation of New or previously untreated Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed
M&L for Preparation of Old painted Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed
Taking down /cutting steel windows shutter by means of gas cutter w/o disturbing of sofit/jambs/cills etc of any description n exc 1.5 sqm (without taking off guard bar) complete all as specified and directed.
S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.
S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperature for mosquito proofing and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352
Dismantling ceiling /wall lining/ boarding of any description, fixed in any position like ceiling,lining, partition etc with nails including frame work of timber complete all as specified and directed.
S&F false ceiling with 9 to 9.5mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 (Using 12.5mm graded aggregate) as in levelling of floor complete all as specified and directed.
M&L for coloured double charge vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20 mm thick screed bed in cement sand mortar 1:4 for laying floor finished complete all as specified and directed.
M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangle) area of each tiles exc 0.18 sqm but n.exc 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement laying over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M & L for glazed ceramic coloured tiles in vertical sufaces 300 x 600 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
S & F in repairs Vitreous china Wash down water closet (pedestal pattern) white including connection to drain and flush pipe, anti-syphonage pipe and fixing plastic WC seat , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
S & F in repairs PVC valveless, syphonic action type 10 Ltr cap flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket and connect to pipes etc. complete all as specified and as directed
S & F in repairs oval shaped coloured vitreous china WHB of overall 600 mm size fixing over 18 mm thick polished granite slab 32 mm including CP Waste coupling, PVC waste pipe etc complete or Equivalent in list approved make Conforming to cat part No-ECS-WHT-601 of Jaquar or of equivalent make specified here-in-after as directed by Engr- in -Charge.
S&F in repairs long body Bib cock with wall Flange and Aerator suitable for 15mm bore dia of pipe, chromium plated, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc conforming to CAT No. DLX-512KN of make Jaquar or of equivalent specified hereinafter complete all as specified and directed.
S&F for repairs 15 mm bore dia Angular Stop cock with wall Flange Fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type) , screwed down, high pressure, with cruch or butterfly handle , screwed down, screwed for iron pipe or for union and fixed conforming to CAT No.COS -103053 of make: ESSCO or of equivalent specified hereinafter complete all as specified and directed.
S&F for repairs 15 mm bore dia 2 way bib cock with wall flange conforming to CAT No CON 041N of Jaquar or of Equivalent make as specified here in after complete all as specified and directed.
S&F 15mm bore brass chromium plated fancy type wall mixer 3- in-1 System with 115 mm bend pipe & aerator for mixing hot & cold water screwed down for iron pipe conforming to CAT No. DLX-519KN of Make : ESSCO or of equivalent specified hereinafter complete all as specified and directed.
S&F 15mm bore brass chromium plated fancy type central hole basin mixer without popup waste system with 450 mm long Braided Hoses for mixing hot & cold water screwed down for iron pipe conforming to CAT No. CON-167KNB of Make: Jaquar or of equivalent specified hereinafter complete all as specified and directed.
S&F 15mm bore brass chromium plated fancy type sink mixer with swinging casted spout with aerator for mixing hot & cold water screwed down for iron pipe conforming to CAT No. MQT-521KN of ESSCO or of equivalent specified hereinafter complete all as specified and directed.
S&F in repairs 20 mm bore dia Gun-metal, globe or gate valves cast copper , with iron whees head , screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs satinless steel double soap dish complete all as specified and directed.
S&F in repairs stainless steel Towel rack with hook (24") complete all as specified and directed.
S&F in repairs satinless steel Paper Holder with Lid conforming to CAT No CAN-1153S of Jaquar or of equivalent specified hereinafter complete all as specified and directed.
S&F in repairs glass corner round with satinless steel railing conforming to CAT Part No Jaquar CAN-1173 or of equivalent specified hereinafter complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 100 mm with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs stainless steel Robe Hook (khuti) with 5 Hook complete all as specified and directed.
S & F in repair towel ring CP conforming to CAT No- CAN-1121BN of Jaquar or of equivalent specified hereinafter complete all as specified and directed.
S&F in repair health faucet 15 mm bore and flexible tube 1.00 mtr long fixed conforming to CAT No ALE-CHR-585 of Make-Jaquar or of equivalent specified here-in-after complete all as specified and directed.
S&F 100 mm round Stainless steel Grating with waste hole complete all as specified and directed.
S&F 100 mm round Stainless steel Grating complete all as specified and directed.
S&F 32/40 mm bore PVC flexible waste pipe connecting to waste fitting for WHB / Sink complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 560 mm x 460 mm including coupling complete all as specified and directed.
S&F in repair Plate rack made of stainless steel 1mm thick kitchen or plate rack of size 1000 mm x 90 mm with plugs, washers and wastes; including fixing with screw complete all as specified and directed.
S & F PVC connections (hot & cold water) 15 mm size with brass nuts of length 600 mm complete all as specified and directed.
Demolition of un-reinforced cement concrete in (floor tiles etc ) ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed.
Dismantling of wall tiling including cement mortar bedding ( but not backing ), removing rubbish off the premises complete all as specified and directed.
M&L for 20 mm thick machine cut & polished granite slab, bedded and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite including laying over 20 mm thick cement screed bed in CM 1:4 complete all as specified and directed.
M&L for Granite (of any type) tiles 20 mm thick machine cut, table top (counter top WHB ) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick cement screed bed in cement motar 1:4 .grinding and polishing complete all as specified and directed.
M&L for 20 mm thick machine cut & polished granite slab, in skirting , dado laid over screed bed and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite including laying over 15 mm thick rendering bed in CM 1:4 complete all as specified and directed.
Rounding of edges of granite stone slabs , as in Wash hand basin slab and other similar situations complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar , including cement mortar bedding and removing rubbish off the premises complete all as specified and directed
S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc. fixed to walls and ceilings or laid in floors including taking up or down of old pipes complete all as specified and directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of old pipes complete all as specified and directed.
Cutting in stone wall for chases, pining in making good to facings where required pointing in cement mortar 1:3 to ends or edges of landinsgs, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing etc and making good, cutting not exc 10cm girth complete all as specified and directed.
S&F rotational moulded high density poly-ethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre and conforming to IS, hoisted and fixed in position incl dismantling existing water tank or removing to store complete all as specified and directed.
Disconnecting existing tanks exc 500 & not exc 1000 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position complete all as specified and directed. (Note : Cleaning, repairing etc measured separately)
Cleaning and removing all scale and dirt, etc, from tanks exc 500 ltr but not exc 1000 ltr and from mouths of circulating pipes, etc complete all as specified and directed.
S&F in repairs ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.
S&F ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.
Demolition and breaking up PVC, RCC, SWG drain pipes etc. set in cement mortar of sizes 100mm / 75mm dia and removing debris from the site complete all as directed by Engr-in-Charge
S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S& F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring including fixed in wall complete all as specified and directed.
S & F 110mm bore PVC (SWR) bends radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S & F 110mm bore PVC (SWR) WC connector bent type complete all as specified and directed.
M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S & F PVC (SWR) bends wth access door 75 mm bore radius complete all as specified and directed.
S & F PVC (SWR) bends 75 mm bore radius complete all as specified and directed.
M & L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M & L for 75 mm PVC (SWR) mullti floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
Demolition of brick or stone/ boulder masonary, built in cement mortar complete all as specified and directed.
M&L for Pre-cast cement concrete type C1 (1:3:6) 20 mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.
M&L for Pre-cast cement concrete type C1 (1:3:6) 20 mm graded stone aggregate solid block building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M & L for Dubbing out average 10mm thick cement plaster in cement mortar 1:6 on irregular face of walls (where wall is not plumbing) complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall measured and paid seperately)
Supply only Integral waterproofing compound complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of brick work in cement mortar 1:6 with finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening including 3 mm thick wall care putty on wall complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M & L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L for complete removal of existing treatment of old wall plaster surface and applying one coats of distemper oil emulsion over 3 mm thick wall putty complete all as specified and directed.
Taking down Chowkats or frames not exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.
Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed
Taking down shutters of any description exceeding 1 Sqm but n.exc 2 sqm each complete all as specified and directed
S&F Pressed steel farmes 125 x 60 mm for doors with one or more rebates including necessary fixing lungs, hinges, lock strike plate etc. complete all as specified and directed.
S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is covered with decorative face veneer with lapping / farme to match complete all as specified and directed.
S&F for 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is coverde with decorative face veneer with lapping / farme to match complete all as specified.
S&F 100 mm long medium weight mild steel butt hinges with galvanised mild steel hinges pin and fixed complete all as specified and directed.
S&F 35 mm thick second Class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt-I Section 8, clause 8.24 (a) complete all as specified and directed
M&L for frame work such as grills guard bars,barred iron doors , ladders railing , gratings,etc end bars shouldered and /or riveted and similar work con-forming to Fe 290.Gde -E-165 complete all as specified and directed.
S&F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Squre tube, suppling & fixing in opening as per SSR Pt-I specificied and drawing complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail, lock rail & bottom rail either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC beading and jointed together with solvent cement ,suppling and fixing in the frame at site as per SSR Pt-I specification & drawing complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy fixed complete all as specified and directed.
S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed
S&F 150 mm long Extruded Aluminium alloy handles, caste type anodised ISI marked complete all as specified and directed .
S&F 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and directed.
S&F 100 mm long hinges heavy weight, cold rolled mild steel and fixed complete all as specified and directed.
S&F 150 mm size Hasp staple Aluminium anodised with mild steel hinges pin including bolt to hinges plate fixed with screw. complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S &F 2nd class hard wood plain, solid chowkat and frames, rebated on solid , rounded or chamfered put together with glue pinned at joint complete all as specified and directed.
S&F of 18/19mm thick Blolck board , grade I quality exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete all as spd and as directed
S&F of 18/19mm thick Blolck board, grade-I quality exterior grade type with decorative face veneer on one faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete all as spd and as directed
S&F stainless steel channels 22 inch 550mm for kitchen drawer complete all as specified and directed
S&F stainless steel/Nickel plates soft closing hinge 16 crank with mounting plates & cover caps for kitchen cabinet complete all as specified and directed.
S&F 100 mm stainless steel handle for kitchen cabinet and drawer complete all as specified and directed .
S&F 6 mm thick plyboard grade BWP type BB, fixed with screw to timber frame work complete all as specified and directed.
S&F 300 mm Mild Steel spring for doors, ordinary rat tail rod pattern springs including roller and roller plate complete. (Fixing in pressed steel frame) complete all as specified and directed.
S&F in repairs 25/20 mm dia Stainless steel fancy type heavy curtain rod medium grade including fancy type bracket stops roller etc complete all as specified and directed.
S&F Stainless steel fancy type curtain rod caps/ side bulbs, etc to be fitted in 25/20 mm curtain rod pipe complete all as specified and directed.
S&F Stainless steel fancy type curtain rod bracket 10 cm long etc to be fitted in 25/20 mm curtain rod pipe complete all as specified and directed.
S&F in repair 20 mm dia Tubular towel rail brass chromium plated D type , 60 cm long between flange complete all as specified and directed.
S&F Galvanized mild steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed
M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed
M&L for Plain Cement Concrete Type D2, in PCC 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for precaste coloured chequered cement concrete tiles, glossy finish of size 305 x 305 x 25 mm thick machine pressed set jointed and pointed with grey cement and pigmenrt in floor and cut and polished including 20mm thick screed bed in cement motar 1:4 complete all as specified and directed.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L for cement concrete type B0 1:2:4 using (12.5 mm graded crushed stone aggregate) , as in roof kerbs , rounded chamfered on edges , in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses , copings kneelers, apex including weathering , slightly rounded or chemfered angles and throating etc. necessary form work complete all as specified and directed.
M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate)as in flooring/ Plinth protection Finish even & smooth with extra cement complete all as specified and directed.
M&L for RCC type B1 1:2:4 (Using 20 mm graded aggregate) as in beams supported on walls and column baloconies and shelves and like work complete all as specified and directed.
Use and waste Formwork, rough finish surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shalves including sup-ports, over hanges,etc. also splays between floors and beams complete all as specified and directed.
M&L for TMT bar 10 mm dia and over cut to length, bent to shape required including bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete as in reinforcement all as specified.
M&L for 35-40 mm thick Cudappah stone slab laying in vertical and platform including 15 mm thick cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.
Cutting in brick wall exc half brick but n. exc one brick in built in cement mortar or cement lime mortar and stone walls for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-
One light point controlled by one, one way switch 5 Amps complete all as specified.
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.
One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.
One bell point controlled by one, bell switch 5 Amps complete all as specified.
All as per item No 126 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.
S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.
S & F for Modular switch piano flush type, singel pole one way 5/6 Amps, 1 module complete all as specified and directed.
S & F for Modular switch piano flush type, singel pole one way 15/16 Amps, 1 module, with neon indicator complete all as specified and directed.
S & F for modular Bell push modular 6 Amps single module complete all as specified.
S & F for Modular socket multipurpose, 5/6 Amps, 2/3 pin combination 2 module piano flush type complete all as specified and directed.
S & F for Modular socket multipurpose, 15/16 Amps, 2/3 pin combination 2 module piano flush type complete all as specified and directed.
Taking down Ceiling fans of any size, removing to workshop for servicing, cleaning, lubricating, replacement of split pin, rubber bush and other spare required including cleaning old dust/grease, painting of the same with white enamelled paint with the help of spray gun including writing of MES no with black enamelled paint as directed by Engr-In-Charge at site fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations.
S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed
Taking down existing sub main wiring and M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete including taking down old unsv sub main all as specified and as directed. (Note :- Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed.)
Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed
Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED mirror light fitting LINNET 2' long, wall mounted type, high efficiency 1x 10 W, 220V, AC with high output diffuser and all fixing arrangements conforming to CAT Part No. LCL-14-CDL or of equivalent specified here-in-after complete all as specified and directed.
S&F exhaust fan made out of sturdy engineering plastic complete with louvres shutter,voltage 230V,50Hz RPM 1200,coppper winding of 250 mm sweep ,230V AC complete all as specified and directed
Supply and fix electronic meters tamper proof LCD display with polycarbonate cover 230V, 10-60 Amp, Accuracy Class-I 50Hz, conforming to IS 13779, IP-54 with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.
S&F MCB DB,SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces,all as specified and directed.
S & F for MCB Single pole and neutral rated capacity 32 Amps, C curve 240 Volts breaking capacity 10 KA complete all as specified and directed.
S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA, c curve complete all as specified and directed.
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)
Supply, install, design, testing and commissioning of free standing wall mounted dust, eater and vermin proof LT distribution board, outdoor type, fabricated with 2.0mm thick CRCA MS sheet for load bearing members and 1.6mm thick for door and covers and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external sufaces after due preparation of surfaces. The panel shall consist of 200 Amps rating TPN bus bars of copper and shall be provided with colour coded heat shrinkable sleeves. The distribution box shall be provided with seperate complartments for each MCB with double stud hinged door, front openable and subtable for 1100 V grade, 3 phase, 415 Volts, 50 Cycles AC Supply. The distribution box shall be fixed on wall with 4 Nos anchor fastners etc, the following items shall be provided in the panel board (a) MCCB TPN 100 Amps cap, rup Cap 16 KA at 415V, 50 Hz AC Supply - 01 No. (b) MCB SPN 32 Amps Cap, rup Cap 16 KA at 230V, 50 Hz, AC supply 'C' series - 10 Nos. (c) Electronic meter tamper proof LCD display with parameters to data, time, current reading, load, PF, voltage and KWH etc. complete all as specified and directed.
Supply, lay, test connecting and commissioning underground stranded aluminium conductor cable LT 1100 volt grade heavy duty XLPE insulated armoured complete laid in trenches / fixed to poles /drawn through pipes with suitable size cable glands criping type cable lugs etc all as specified and directed of size 16 Sqmm 4 core, including taking down old unserviceable cable complete all as specified and directed.
Excavation in trenches n.exc 1.5mtr wide and not exc. 1.5m in depth for foundation and getting out in soft/loose soil complete all as specified and directed.
Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and directed.
Removing excavated material not exceeding 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge.
M&L for laying of Reinforced concrete pipes, class NP2 of dia 100 mm bore, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling complete all as specified and directed Engr-in-charge.
Supply and fix street light fittings Pressure die cast aluminium housing, IP65 Protection, heat resistance toughened glass with frame LED street light luminaries complete with driver and all standard accessories of capacity 35 Watt LED including necessary fixing arrengements with GI Pipe 40mm and MS clamp 02 Nos, necessary connection etcall as specified and directed by Engineer-in-charge
Supply and laying of GI tubing 50mm bore 'Light Grade' for cable protection and fixing to pole / wall with flat iron clamps 25x3mm including nuts bolts and washers etc complete all as specified and directed.
SARATH ENTERPRISES
Gauri Associates
GS Associates
REKHA ELECTRICALS
M/s.BAJRANG CONSTRUCTION
TRINITY ENGINEERS
GRACE CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .