Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Qualified |
| 2 | Accepted-Technical | Accepted-Technical Qualified |
Tender Value
Refer Docs
EMD Value
₹16.1 L
Closing Date
25 Nov 2025, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Vidhyut Bhavan,66KV road, near Secretariat, Silvassa, Dadra and Nagar Haveli and Daman and Diu- 396230.Ph.No. 0260-2406547
Erection of new 66 KV Multi Circuit tower line from 220/66 KV Vaghchhipa Sub-station to Tapping point on 66 KV Dadra line at village Lavachha.(IIIrd Call)
2025_UTDNH_7796_1
28/2025-26/687
Open Tender
Electrical Works
Works
360 days
SIlvassa
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,770
DNH and DD Power Corporation Ltd.
₹16.1 L
8 Dec 2025
17 Nov 2025
25 Nov 2025
17 Nov 2025
25 Nov 2025
17 Nov 2025
17 Nov 2025 - 21 Nov 2025
TOWER FOUNDATION AND ERECTION WORK Original survey, preparation & submission of profiles in 4 copies including excavation in any type of soil up to 3.00mtr. Of depth for trial pits 2 nos of such pits in 1km length & providing pre cast permanent concrete blocks / stones of 600mm X 300mm X 100mm on each deviation point on entire line with chain age painted on it. The work includes excavation of trial pit of 1 x 1 x 3mt in any type of soil for classification of the said pit. The rate is inclusive of back filling of the pits so excavated after clafissification of soil for foundation.
Check survey
Excavation excluding back filling but including shoring shuttering, dewatering, tree cutting for tower footings etc for :- a) Normal soil either dry or wet/Sandy soil
b) Black cotton Soil either dry or wet
c) Black cotton submerged / Marine soil where dewatering is necessary
d) Soft rock
e) Hard Rock
Installation of steel reinforcement in concrete foundation including supply of MS bars, binding wire and their cutting bending, binding, and laying in position as per drawing
Stub-setting including back filling but excluding excavation and concreting etc for all types of towers/extensions except special towers (Weight of stub, cleat and template with bolt and Nuts of stub and template shall be counted
Concreting of foundation by M20 mixture including shoring, shuttering,dewtering etc. for normal tower/tower with extension up to 21 mtr (Rates are with cement)
Concreting of foundation by M15 mixture including shoring, shuttering,dewtering etc. for normal tower/tower with extension up to 21 mtr (Rates are with cement)
Erection of super structure upto 6 meter extension including tree cutting , fixing of tower accessories , attachments except ACD/DP/NP/CIP/PP and excluding tack welding of bolts. This includes taking delievery of tower materials and bolt nuts from stores etc. for normal, extension and special towers at destination and keeping them in safe custody and transporting the same to erection site
Tack welding of nuts up to approx 10 mtrs height or two bottom most panel from ground level at three places on the nuts diametrically and applying zinc rich paint immediately after tack welding
Random Stone masonry revtment with 1.5 cement morter including excavation, back filling and leveling ( Rates are with cement)
STRINGING OF 66 KV LINE Stringing of OPGW wire laying, jointing, tensioning, clamping with accessories, jumpering and sister wire etc and includes tree cutting
Stringing of ACSR/AAAC/TACSR 6 (Six) conductors for double circuit including laying, jointing, tensioning, clamping with armour rods, hoisting of insulator stringing, fixing of jumpers, dampers etc and with required tree cutting on entire length for adequate clearances/safe charging of line ( 160 Sqmm TACSR Conductor)
TOWER HARDWARE,ACCESSORIES & TACSR CONDUCTOR HDGI tower materials
HDGI bolt nuts with wisher
High capacity conductor TACSR (Thermal-resistant Aluminum-alloy Conductor Steel Reinforced) of 160 SQ. MM , TAL 30/2.60mm + ST 7/2.60 mm, Confirm to relevant IEC specification i.e AL alloy wire IEC 62004, GI wire IEC 60888 and Fabrication and testing IEC 61089 amended up to date, Conductor comparable of 0.2 ACSR PANTHER conductor current carring capacity above 700 Amps at temperature of enhance the transmission capacity. MAKE: APAR/Transrail/Sterlight
Insulator 120 KN (66KV Polymeric String)
Single Tension Hardware for TACSR 160 SQ. MM
Jumper Cone for TACSR 160 SQ. MM conductorr
Vibration Damper for TACSR 160 SQ. MM conductorr
OPGW Wire & Accessories
Splice joint accessories
66KV CABLE LABOUR WORK Under ground laying/installation of 66 KV (E) 800 sq.mm XLPE power cable for two double circuit 2 X (3+1) Each circuit with 3 no single core cable, along with one spare cable for two circuit inclusive of requisite materials supervision testing and installation precommissioning test etc and associated civil works which are necessary in laying / installation of the 66 KV suporting along with fixing SVL with link box & without SVL link box and all required accessories, clamping etc includes excavation of all type of soil backfilling and civil work etc complete.
Supply of 66 KV cable with Accessories 66 KV , 1 Core X 800 sq mm XLPE insulated power cable, the cable complies with national & international standerd such as IS 7093(P-3) and IEC 60840, rated voltage 66KV( Um=72.5 KV). As per Technical Specification. Make: Torrent/Havells/KEI/RR Kabel
Providing and Installation of co-axial cable 1 core X 150 sq. mm copper flexible 6.6 KV Voltage grade Make: Torrent/Havells/KEI/RR Kabel
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.12 MB
Tenderconditionforwork.pdf
Tender Documents • 0.46 MB
Technspec66kVOverheadline.pdf
Tender Documents • 2.06 MB
66kvtowermaterialSpecification.pdf
Tender Documents • 0.14 MB
BOQ_7990.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .