CA NO. GENP-62/2019-20 REPAIR TO STEEL/MAP FURNITURE INCLUDING CHARPOY AT AF STN PALAM UNDER GE (AF) PALAM

Amount

Almirah Steel large/medium S&F lock of required size and shape with duplicate brass chromium plated key and fixed to steel Almirah medium/large including taking out old defective/unserviceable lock and repair to locking system complete.

Fixing only existing loose shelf including M&L for necessary screws, nut & mild steel clamps for fixing shelf to steel Almirah medium/large complete.

S&F legs to steel Almirah large including taking out old unserviceable legs complete all as specified and directed by Engineer-in-Charge. (Note- legs shall be provided in set)

All as per item No. 03 here-in-before but for Almirah medium steel.

S&F in replacment of brass chromium plated handle for required shape and size for steel almirah medium/large with using of bush and proper nut, bolt etc complete all as shown on drawing and directed by Engineer-in-Charge.

S&F in replacement of mild steel rod of required shape and size for steel almirah medium/large using bush and proper nut, bolt etc all as shown on drawing and directed by Engineer-in-Charge.

Chair Tubular Steel with/without Arm S&F seat of seasoned teak wood wrought face frame duly canned with 2mm wide cane plastic of half around in true Godrej pattern for Chair Tubular Steel with arm including taking out existing seat frame complete all as shown on drawing and as directed by Engr-in-Charge.

All as per item No 7 here-in-before but back of chair.

S&F in repair flat iron of size 25mm x 5mm and 500 mm long suitabley welded with frame of Chair Tubular Steel with arm/without arm complete all as shown on drawing and as directed by Engr-in-Charge.

S&F hard rubber shoes to the bottom of chair fixed with screws etc to chair Tubular Steel with arm complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for providing seasoned, teak wood wrought face hand rest for tubular steel with arm complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F seat seasoned teak wood wrought face frame duly canned with 2mm wide cane plastic of half round in true Godrej pattern for Chair tubular steel without arm including taking out existing seat frame complete all as shown on drawing and as directed by Engineer-in-Charge.

All as per item No 12 here-in-before but back.

All as per item No 10 here-in-before but for Chair tubular steel without arm.

All as per item No 11 here-in-before but for Chair tubular steel without arm.

Teapoy Verandah S&F 18 mm thick Pre-laminated particle board top of size 900 mm x 450mm duly fixed with 18x6mm thick teak wood lipping/beading to teapoy verandah top including dismantling existing top complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F in repair hard rubber shoe fixed with screws etc to bottom of leg of teapoy verandah complete all as shown on drawing and as directed by Engineer-in-Charge.

Table Office Clerk Steel S&F 18mm thick Pre-laminated particle board top one side teak faced for Table Office Clerk steel duly fixed with 18x6mm thick wood lipping/beading to table top including dismantling of existing top complete all as shown on drawing and as directed by Engr-in-Charge.

S&F in repair hard rubber shoe fixed with screws etc to the bottom of leg of Table Office Clerk Steel complete all as shown on drawingand as directed by Engineer-in-Charge.

S&F lock with duplicate key and fixing to table office clerk steel including taking out of existing defective/unserviceable lock complete all as specified and as directed by Engineer-in-Charge.

S&F drawer of table clerk steel made of 1mm thick mild steel sheet including dismantling of existing defective/unserviceable drawer of any description all as specified and as directed by Engineer-in-Charge.

Table Office Steel All as per item No 18 here-in-before but Table Office Steel for officers.

All as per item No 19 here-in-before but for Table Office Steel for officers.

S&F lock with duplicate key and fixing to table office steel for officers including dismantling of existing defective/unserviceable lock complete all as specified and as directed by Engineer-in-Charge.

S&F drawer for table clerk steel made of 1mm thick mild steel sheet to table office clerk steel complete all as specified and as directed by Engineer-in-Charge.

M&L in repair for welding to different items of steel furniture with electric gas arc welding n. exc 2.5 cm in each length (welding shall be smooth clear and including filling and removal of burns) complete all as specified and as directed by Engineer-in-Charge.

Chair Writing Officer S&F handle of superior quality as per sample approved by GE for chair writing officer including dismantling of existing unserviceable handle.

S&F in repair Flat Iron of size 25mm x 10mm and welded for stengthing of base on both side of chair writing officer.

BED HARD S&F plywood of size 6½ feet x3 feet x12mm thick commercial for Bed Hard including taking out unserviceable plywood of any description complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F nut & bolt to Bed hard steel including taking out nut & bolt of any discription complete.

S&F rubber shoe for Bed hard steel including taking out rubber shoe of any discription complete as specified and as directed by Engr-in-charge by GE/Engineer-in-Charge.

S&F head board with complete frame work of mild steel square pipe of size 38mmx 38mm x 18 gauge thick for Bed hard steel including taking out existing head board of any description complete.

S&F foot board with complete frame work of mild steel square pipe of size 38mmx 38mm x 18 gauge thick bed hard steel for including taking out existing foot board of any description complete.

Chair Verandah officer S&F seat and back white colour for chair varandah including taking out existing unserviceable seat & back of any description complete on drawing and as directed by Engineer-in-Charge.

S&F rubber shoe to chair varandah including taking out old/unserviceable rubber shoe of any description complete.

Recanning M&L for re-canning with 4mm wide cane to chair verandah after painting a coat of white paint including dismantling of existing unserviceable cane of any description complete all as shown on drawing and as directed by Engineer-in-Charge.

Chair computer S&F in replacement of handle of superior quality as per sample approved by GE including nut & bolts for chair computer.

S&F base with caster wheel to chair computer including taking out old base with caster wheel of any description complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F tapestary cloth in seat and back including three inch thick foam in seat and two inch thick foam in back of 32 density best quality including dismantling of existing cloth/foam of chair computer complete as specified & directed by Engr-in-Charge. Note :Tapestary cloth and leatherised cloth shall be of best quality and shall not be less than Rs 200/- per RM.

S&F in repair Hydraulic of Chair revolving of exsiting size, shape & pattern complete all a specified and directed by Engr-in-Charge.

S&F in repair complete synchricnising assembaly of Chair revolving of exsiting size, shape & pattern complete all a specified and directed by Engr-in-Charge.

Table Computer S&F in replacement of top of 18mm thick prelaminated particle board complete all as shown on drawing and as directed by Engineer-in-Charge.

All as per item No 38 here-in-before but Key board as approved by GE.

All as per item No 38 here-in-before but telescopic channal as approved by GE.

Table Bedside S&F leg for table bed side made out of mild steel tube steel including taking out existing/unserviceable leg of any description complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F 18 mm Pre-laminated particle board of finish colour and pattern as approved br GE to side and top of table bedside all as shown on drawing including dismantling of existing top & side as specified and as directed by Engineer-in-charge.

S&F 6mm thick commercial face ply wood for back side of table bed including dismantling of existing unserviceable plywood complete all as shown on drawing and as directed by Engineer-in-Charge..

S&F in replacment of brass chromium plated handle of size 75mm for bed side table complete as shown in drawing and directed by Engr-in-Charge.

S&F 18 mm Pre-laminated particle board of finish colour and pattern as approved to side left and right top of table bedside including taking out old top and side as specified and as directed by Engineer-in-charge.

Shoe Rack Steel S&F in repair Net complete for Shoe Rack steel made of 3mm dia mild steel complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement of rubber shoe for Shoe Rack steel complete as specified and as directed by Engr-in-charge by GE/Engineer-in-Charge.

Chair Visitor S&F tapestary cloth in seat and back including three inch thick foam in seat and two inch thick foam in back of 32 Kg per Sqcm density best quality including removing of old unserviceable tapestary cloth complete. Frame of chair shall be painted with two coats of synthetic enamel paint of black colour. Leatherised cloth shall be provided on arms of chair including one inch thick foam of 32 Kg/Sqcm density. Note :Tapestary cloth and leatherised cloth shall be of best quality and shall not be less than Rs 200/- per RM all as specified and directed by Engineer-in-Charge.

S&F 12 mm thick moulded ply to seat of chair visitor including dismantling of existing unserviceable ply complete.

All as per item No 53 above but for back of chair visitor

S&F tapestry cloth/leatherised cloth, lining cloth,foam 50mm thick, hessian cloth, cotton, coir fibre with best quality upholstery of fully upholstered sofa set of 5 seater including fixing arm/side suitable with mild steel screws including dismantling of existing cloth, foam, coir fibre etc complete from sofa set 5 seater. Note :- (i)Tapestary cloth/ leatherised cloth shall be of best quality and shall not be less than Rs 200/- per RM all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted /repaired steel surfaces of almirah medium steel including removing the dent(s) by scratching/scrubbing and applying two coat of synthetic enamel paint (OG/Gray/Black colour) over a coat of red oxide primer by spray machine complete all as specified and as directed by Engineer-in-Charge. Note :- Spray Painting shall be done on both (i.e. in & out) sides of all surfaces of almirah medium steel.

All as per item No.56 here-in-before but Almirah large steel.

All as per item No.56 here-in-before but table office steel for officers.

All as per item No.56 here-in-before but table office steel for clerk.

All as per item No56 here-in-before but bed hard steel.

All as per item No.56 here-in-before but charpoy IP Hard top steel.

All as per item No.56 here-in-before but Shoe Rack steel.

M&L for preparation of old painted/repaired steel surfaces of rack steel all type including removing the dent(s) by scratching/scrubbing and applying two coats of Metal paint of colour smoke grey/OG/Gray over a coat of red oxide primer by spray machine complete all as specified and as directed by Engineer-in-Charge. Note :- Spray painting shall be done on both (ie in & out ) sides of all surfaces of rack steel).

All as per item No. 63 here-in-before but Form with back and without back.

All as per item No.63 here-in-before but Chair verandah with white colour paint

All as per item No. 63 here-in-before but teapoy verandah with white colour paint.

All as per item No. 63 here-in-before but table bed side frame with black colour paint.

All as per item No. 63 here-in-before but Locker bed side steel.

All as per item No. 63 here-in-before but chair tubular steel with/without arm.

Charpoy GI Pipe M&L for weaving of virgin (ie not recycled) Nylon newar white or light colour 50 to 55mm wide 4 ply fresh as per sample approved by GE including taking out old Nylon Newar from charpoy GI pipe of any description complete all as shown in drawing and as directed by Engineer-in-Charge. Note:- (i) Nylon Newar shall be woven closely one up and next down on top and bottom both without leaving any space. (ii) Virgin Nylon newar shall be incorporated not less than 1.5 kg in each charpoy.

M & L for modification of charpoy GI nylon newar using two Nos stiffners of 40 mm mild steel flat Iron 1.6mm thick duly nut & bolt system and fixing ply wood 12mm thick of commercial quality ISI marked of size 1.98 mtrx0.92 mtr with the help of 08 Nos bolt and nut as directed by Engr-in-Charge. Note: Stiffners and flat iron shall be painted with two coat of synthetic enamel paint black colour over a coat of red oxide primer.

S & F in replacement of 12mm thick commercial plywood 6½ feet x3 feet BWR grade for charpoy ply top with suitable size stainless steel nut & bolt of minimum 10 Nos by making holes all as specified and as directed by Engr-in -charge.

S&F in replacement of Galvanised Iron pipe 32mm bore, medium grade duly threaded, cut to required length as in long rail to be fixed in old charpoy complete all as specified and as directed by Engineer-in-Charge

Labour only for necessary cutting, threading as required for making short rail from long rail (32mm bore) and fixed to old existing Charpoy complete all as specified and as directed. Note : (a) Long rails retrieved from item 73 above shall be cut to length so as to make short rails all as per direction of Engineer-in-charge. (b) Long rail not ordered to be cut for making short rail on account of any reasons what so ever shall be Contractor’s property

All as per item No.74 here-in-before but for legs made from short rail retrieved from item 74 above. Note : - (a) Short rail retreived shall be cut to length so as to make legs as per direction of Engineer-in-Charge. Cutting schedule to this effect shall be prepared be kept on record.(b) Short rail not ordered to be cut for making legs on account of any reasons what so ever shall be contractor’s property. (c) Any piece of length remained balance after use of long rail into short rail and or short rail to legs shall be Contractor’s property

S&F in replacement of Galvanised Iron Cap 32 mm dia of existing charpoy by Gas welding complete all as shown on drawing and as directed by Engineer-in-Charge

S&F in repair mild steel clamp welded to GI legs and applying two coats of synthetic enamel paint over one coat red oxide primer after preparation of steel surface complete all as specified and as directed by Engineer-in-Charge

S&F in replacement of 32mm bore Galvanised Iron medium grade elbow 65mm long three way internally threaded all ends to old Charpoy complete all as specified and as directed by Engineer-in-Charge.

Charpoy folding IP plytop:- S&F 8mm thick ply BWR grade commercial veneered both side of existing old charpoy folding IP ply top including taking out old/unserviceable ply top including painting with two coats of synthetic enamel paint OG/Grey colour over a coat of pink primer complete all as shown on drawing as specified and as directed by Engineer-in-Charge.

M&L in repair for welding to different items of steel furniture with electric gas arc welding n. exc 2.5 cm in each length (welding shall be smooth clear and including filling and removal of burns) complete all as specified and as directed by Engineer-in-Charge.

Charpoy IP Hardtop : S&F 12mm thick ply BWR grade commercial veneered both side of existing old charpoy IP hard top including taking out old/unserviceable ply top complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F rubber shoe for charpoy IP hard top including taking out old/unserviceable shoe complete all as shown on drawing and as directed by Engineer-in-Charge

SUNIL TRADERS

M/S S.K.Electricals

SOHAN SINGH AND SONS

M/S Shri Balaji Enterprises

UNIVERSAL ENTERPRISES

M/S NEHAL ENTERPRISES

M.R. ENTERPRISES

SMS Enterprises