Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 CrAccepted-AOC | ₹3.8 Cr | L1 | Accepted-AOC Lowest and negotiated tenderer |
| 2 | L2₹4.0 Cr+₹25.2 L (6.69%)Rejected-Finance | ₹4.0 Cr+₹25.2 L (6.69%) | L2 | Rejected-Finance High rate tenderer |
| 3 | L3₹4.3 Cr+₹53.5 L (14.2%)Rejected-Finance CHENNAI 600 095 | CHENNAI | TAMIL NADU | 600001 | ₹4.3 Cr+₹53.5 L (14.2%) | L3 | Rejected-Finance High rate tenderer |
| 4 | L4₹4.3 Cr+₹54.2 L (14.4%)Rejected-Finance MIG 303 B 13 THAARINE NIVAS TNHB PHASE II NOLAMBUR CHENNAI 600 037 | THIRUVALLUR | TAMIL NADU | 600037 | ₹4.3 Cr+₹54.2 L (14.4%) | L4 | Rejected-Finance High rate tenderer |
| 5 | L5₹4.4 Cr+₹58.7 L (15.6%)Rejected-Finance | ₹4.4 Cr+₹58.7 L (15.6%) | L5 | Rejected-Finance High rate tenderer |
Tender Value
Refer Docs
EMD Value
₹2.8 L
Closing Date
20 Jan 2021, 6:00 pmClosed
Superintending Engineer/CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10.
Construction of Working Womens Hostel G plus 4 floors for 122 Nos. Capacity with development works at Nandhivaram, Guduvanchery in Chengalpattu District on behalf of Tamil Nadu Working Womens Hostel Corporation
2020_TNPHC_189702_1
SE/CC/DB/2371 A/2020
Open Tender
Civil Works
Lump-sum
330 days
Guduvanchery in Chengalpattu District
Construction of Working Womens Hostel G plus 4 floors for 122 Nos. Capacity with development works at Nandhivaram, Guduvanchery in Chengalpattu District on behalf of Tamil Nadu Working Womens Hostel Corporation
8 documents required · 8 mandatory
₹0
₹2.8 L
1 Mar 2021
1 Jan 2021
22 Jan 2021
1 Jan 2021
20 Jan 2021
1 Jan 2021
Amount
1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint
13.1) Filling with Excavated Earth
21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m
b. T.W. below 2 m length.
23.3) S&F of Magnetic door catches
25) M.S.Holdfast
30) Ellispattern
31) Weathering course
39) M.s Grills
40) Painting - New "wood work"
41) Painting - New "iron work"
46) Supply and fixing 20 mm dia Alu. Hanger Rod
47) Supply and fixing Alu Towel rail 75 cm long
48) Supply and fixing 5 pin Coat stand
49) Supply and fixing chromium plated 8 guage Picture Hook
50.3) Supply and planting avenue trees
50.4) Providing Tree guard
52) PVC Water supply (ASTM) a. 32 mm dia
b. 25 mm dia
78) Electrical arrangements Earthing Station IS3043 (Type I)
86) Anti termite treatment
112) Supply and fixing of AC Exsaust Fan 300 mm dia
ANNEXURE 2.1.1) Filling C.S. sand
2.15) Supplying and filling stone dust
3.1.3) C.C.1:5:10 for Foundation & Basement
3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works
6.2.2) Brick work in C.M. 1:5 using Fly Ash bricks of size 23 x 11 x 7 cm in Foundation and Basement
8.2.4.1) Standardised concrete Mix M25 Grade Concrete a. In Foundation and basement
b. Stilt / Ground Floor
c. In First Floor
d. In Second Floor
e. In Third floor
f.In fourth floor
g.In fifth floor
9.2.2) Brick work in C.M. 1:6 using Fly Ash bricks of size 23 x 11 x 7 cm a. In Stilt / Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
f. In Fifth Floor
10.2.2) Brick partition work in C.M. 1:4 using Fly Ash bricks of size 23 x 11 x 7 cm 110 mm tk (B.P.) a. In Foundation and Basement
b. In Stilt / Ground Floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
11.2.2) Brick work in C.M. 1:4 using Fly Ash bricks of size 23 x 11 x 7 cm 70 mm tk (B.P.) a. In Stilt / Ground Floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
14.2.I)Precast Cupboard slab 20 mm tk.using standardised concrete mix M25 a. In Stilt / Ground Floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
14.2.II) Precast cupboard slab 40 mm tkusing standardised concrete mix M25 b. In Stilt / Ground Floor
c. In First floor
d. In Second floor
e. In Third floor
f. In Fourth floor
18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,
b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works
c.For Square and rectangular columns and small quantities
d.Vertical wall
f.Curved surface
21.5.1.3) Supplying and fixing of solid core flush door shutter of thickness 35mm b) door size 1.80 m x 2.10 (Double leaves)
d). door size 1.50 m x 2.100 (Double leaves)
21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). door size 1.200m x 2.100 (single leaf)
b). door size 1.000 m x 2.100 (Single Leaf)
c) door size 0.900 m x 2.100 (Single Leaf)
d) door size 0.750 m x 2.100 (Single Leaf)
22.3.2) MDF board (18mm thick) double leaf shutters with TW frame for cup board/ ward robes.
22.6.3) Providing teakwood glazed french window shutters and 5.5mm thick plain/colour glass for panels (Aluminium Furniture fittings) a) 750x2100mm (Single leaf)
b) 1100x2100mm(Single leaf)
22.6.4) Providing teakwood glazed french window shutters and 5.5mm thick plain/colour glass for panels (Brass Furniture fittings) c) 1300x2100mm (Single leaf)
23.2.1) 5mm thick plain Glass panels with Aluminium beedings
26.1) Flooring in C.C.1:5:10
28.1) Floor plastering in C.M. 1:4, 20 mm tk.
29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk
29.9.2) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).
31.5.1) Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete
33.2.1) Plastering in C.M. 1:5, 12 mm tk.
34.2.1) Plastering in C.M. 1:4, 12 mm tk.
35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.
36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.
44.2.2) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M25)
b) Augering 30cm dia
44.6) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe
50.2.1) Supply of Korean lawn and laying in position
50.2.1.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm
50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board
50.6) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre
52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)
52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
52.9) Supplying and delivery of following materials of best approved quality for erection of submersible pumpset a) M.S clamp set 50mm dia
53.3) C.I. Steps ( 5 kg)
53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )
53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)
54.1.1) Supply and fixing of 15mm dia half turn CP long body tap
54.2.1) Supply and fixing of 15mm dia half turn CP short body tap
56.3.1) Supply and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.
56.4.1) Supply and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.
57.1.1) Supply and fixing of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP
58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia.
58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
59.2.1) Gully Trap using Flyash bricks of size 9”x4¼”x2¾” (23x11x7cm)
60.1) PVC Nahani trap (4way/2way)
61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe
b. 160 mm UPVC Non Pressure pipe
62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend
b. 160 mm dia PVC bend
62.2.1) PVC Equal Tee as per BIS 10124/1982 Part II a. 110 mm dia PVC Equal tee
b. 160 mm dia PVC Equal tee
64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark a. Light point with ceiling rose
64.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark (6 amps Modular switch 1W-1 Module) a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan point (6 amps Modular switch 1W-1 Module)
66.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Staircase Light Point (6 amps Modular switch 2W-1 Module )
67.1.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 6 A Modular switch 1W-1 Module and 6 A 5 pin universal socket-2 Module point @ Switch Board Itself
68.2.3) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 6 A Modular switch 1W-1 Module and 6 A 5 pin universal socket-2 Module point @ Convenient Places
69.2.2) Supply and fixing of 16 amps power plug (Modular) socke with switch
70.5.2) Supply and fixing of 4' 18 watts LED Tube Light
75.2 ) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer
77.4.6) Supply and laying of 25mm PVC rigid pipe concealed in wall and ceiling
77.7) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
Electrical arrangements 79.5) Supplying and fixing 1 Nos of 32Amps 500 volts grade porcelain fuse unit on suitable teakwood plank
80.4) 450 x 375 x 20 mm thick TW plank
82.3.1) Supply & fixing of 30W LED street light etc.,
82.5) Supply, Installation, Testing and Commissioning of 2 KVA sinewave single phase inverter
84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
88.1.1) Polished Shahabad Stone Slabs 20mm thick with Machine Cut Edges of size below 2'0" x 2'0" flooring, C.M 1:3, 20mm tk
88.3.1)Polished Rajasthan Kota Stone Slabs of 20mm thick with Machine Cut Edges of size below 2'0" x 2'0" flooring, C.M 1:3, 20mm tk
93.1)Plastering with CM 1:3, 12mm with WPC
96.6) Supplying and laying of 83mm thick Rubber Moulded Hydraulic Pressed Paver Block
98.2.1) TW panelled single door shutter without brass fittings. a) 900X2100mm without Brass fittings ( Single leaf)
98.5.3) TW double leaves shutter of size with brass fittings a.1800 x 2400mm
108.6.2) Run of 4 Wires of 6 sqmm PVC insulated single core multi strand
108.7.1) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand
112.6) Supply and fixing of 375 mm ( 15") sweep light duty / heavy duty AC exhaust fan complete with internal connections in the kitchen.
151.3.1) Supply and laying of PVC /LTUG aluminium conductor 1.1KV grade armoured ,MV cable a) 3.5 C x 120 sq mm PVC armoured LTUG cable (below G.L)
b) 3.5 C x 185 sqmm PVC armoured LTUG cable
155.1.1) Panel board Supply and erection of 100 Amps capacity floor mounting / wall mounting panel board (Cubical type)
155.2.1) Supply and erection of 200 Amps capacity floor mounting / wall mounting panel board (Cubical type)
161.1.1) supplying and delivery of following pvc armoured copper cable a) 4 core x 10 sqmm aluminium armoured cable with glands, lugs, clamps, etc.
161.1.4) Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection. a) 3.5 c x 120 sqmm PVC / XLPE LTUG armoured cable
b) 3 1/2 x 185 sqmm aluminium cable
c) 3.5 c x 70 sqmm PVC / XLPE LTUG armoured cable
d) 3.5 c x 25 sqmm PVC / XLPE LTUG armoured cable
e) 4 C x 16 sqmm PVC / XLPE LTUG armoured cable
f) 4 C x 10 sqmm PVC / XLPE LTUG armoured cable
161.4) Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable a) 3.5 C x 120 sqmm PVC / XLPE LTUG armoured cable
b) 3 .5 C x 185 sqmm aluminium cable
c) 3.5 C x 70 sqmm PVC / XLPE LTUG armoured cable
d) 3.5 C x 25 sqmm PVC / XLPE LTUG armoured cable
e) 4 C x 16 sqmm PVC / XLPE LTUG armoured cable
f) 4 C x 10 sqmm PVC / XLPE LTUG armoured cable
162.2.1) Supply and clamping of PVC / XLPE, conductor 1.1KV grade armoured, MV cable a) 3.5 C x 70 sqmm PVC / XLPE LTUG armoured cable (above G.L)
b) 3.5 C x 25 sqmm PVC / XLPE LTUG armoured cable
c) 4 C x 16 sqmm PVC / XLPE LTUG armoured cable
d) 4 C x 10 sqmm PVC / XLPE LTUG armoured cable
164.1.1) Supply ands installation of 2 core x 1.5 Sqmm copper LTUG cable
171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 3H.P capacity electric motor pump set
171.2.9) Supply and Delivery of Openwell submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 3 H.P capacity 200 LPM X 40 m of electric motor pump set
175.1.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board
MISCELLANEOUS ITEMS 175.1.6) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection a) 40 A TPN 10 kA MCB
b) 10/20/32A DP 10 KA MCB
c) 63A TPN 10 KA MCB
Earthing 179) Plate earthing with copper plate of size 600 x 600 x 3 mm
179.1) Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required
179.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral
180) Supply and run of 2 of No.8 copper wire for earth connections
184.2.5) Supply and fixing of 2' 10 W batten( mirror light) LED fitting
207.3.1) Plastic Emulsion PAINT including primer for outer walls (Two coat)
213.1) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement a. 600mm x 600mm
b. 300mm x 300mm
213.2) Supplying and delivery of 9" dia MS Borewell cover for pumpset
238.1) Anticorrosive treatment for window grills
255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb
255.7.2) supply and fixing of fancy type AC / DC 76 mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board
255.8.3) Supply and fixing of 12 W surface / recess mounted down lighter complete ( ceiling fixture ) with 12 watts LED bulb
257.1.1) Supply and fixing in posistion of 2 ply and four pronged ( Galvanised) 10 guage (barbed wire)
Sewage Treatment plant 298.1) Supply and installation of Bar screen
298.2) Supply and Installation of Sewage transfer cutter pump with accessories
298.3) Supply and Installation of Submersible Aerator with Motor with accessories
298.4) Supply and Installation of Filter feed pump
298.5) Supply and Installation of Pressure Sand Filter, Frontal pipes work and Filter Medias with accessories
298.6) Supply and Installation of Activated Carbon Filter, Frontal pipes work and Activated carbon with accessories
298.7) Supply and Installation of Chlorine dosing system with accessories
298.8) Supply and Installation of Sludge recirculation Pump with accessories
299) Supply and erection of 200 Amps capacity floor mounting / wall mounting panel board for STP(Cubical type)
299.1) Supply of MBBR Medias for aeration tank
299.2) Supply and Installation Settling Tube settler with accessories
299.3) Supply, fabrication and Installation MSEP/ UPVC Interconnecting pipe work
299.4) Supply and Installation of STP-Treated water transfer pump with accessorie
299.5) Labour and Installation charges
344.2) S&F of Bevelled edge mirror 500 x 400 x 5.5mm
359.3.1.1) Concrete designer tiles flooring
361.2.1) Supply and Laying of Nano Polish Virtified tile Flooring with 1st Quality homogeneous tiles in C.M 1:3 20mm thick
361.2.2) Antiskid Nano Polish Vitrified Flooring with 1st Quality homogeneous tiles in C.M 1:3 incl. pointing with Latricrete or Equivalent make Epoxy Stain Free (SP-100) grout with spacers (min.2mm)
366.3.1) Supplying & fixing of Stainless steel Hand Rails for Staircase
367) Providing wooden Melamine polish for new wood work
379.4.4.1) Supply and fixing of Granite slab of size 4'x2', 18 to 20mm Thick For kitchen arrangements (jet black) C.M 1:3, 20mm tk a. In Ground floor
379.7.4) Granite Tile wall cladding using 10mmtk (Satheleri Grey) tile in C.M 1:2, 10mm tk .
379.8.2.1) Supply and fixing of Granite tiles Jet black C.M 1:2, 10mm tk for Staircase wall portion
379.8.3.1) Supply and Laying of Granite tile of 10mm thk (wall Cladding ) in C.M 1:2 Incl. Cost of Materials, Labours etc., all Including (Ruby Red) for lift potion
383.3) Providing double nosing to the edges of Granite slab
383.4.1) Supply and fixing of stainless steel sink 600 x 600 x 200mm
383.4.2) Supply and fixing of Stainless steel wash hand basin size :3.75mx0.60m
384) Supply and fixing of PVC flushing cistern
448.2) Providing PVC Tee with end cap
451.3.2) Supplying and fixing of the following C.P water supply fittings of approved make (ISI) a) CP two way bib cock with health faucet
b) CP Shower Arm with Overhead shower rose
c) CP Angle cock tap
d) Brass chromium plated soap tray of size 150mm x 100mm
452.2.3) Supply and Installation of 1000 LPD Solar water heating system FPC type Stand alone models
452.2.4) 2HP pressure pump to pump the cold water from the OH tank to the Solar Water Heater
452.2.5) SOLAR POWER PLANT ARRANGEMENTS Supply,Erection, Commissioning and testing of SOLAR POWER PLANT (Superior variety) - On - GRID System: 12 KWP
452.2.6)Solar On Grid / Grid Tie Inverter as per MNRE Standards, 3 Phase. 1 Nos of 12 KW. This is including of Array Junction box, combiner Box whereever necessary.
452.2.7) Roof Top Mounting structure & electrical Accessories. Mounting structure design to withstand wind velocity up to 150km/hr, Structure material - hot dip galvanised
452.2.8) Supply and Commssioning of Contol Pannel with accessories, Installation of AC DB and DC DB with 4Sqmm 4 core cable
452.2.9) UG Cable work LT 4 Sqmm Copper, 4 core copper cable, AC DB to Main distribution panel.
503.1) Nylon rope for Bore well
504.5) Supplying, laying, fixing and jointing the following UPVC pipes as per D- 1785 of schedule 40 of wall thickness). 40 mm dia UPVC pipes (above Ground level)
507) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water
528.1.2) Supply and fixing of perforated cable trays of sizes as given below made out of 14 SWG CRCA sheet steel and hot dip galvanized a) 150 x 50 mm
532.2) Providing one coat of Wallputty for new plastered surface
608.1) Supplying, laying, fixing and jointing the following UPVC pipes as per D- 1785 of schedule 40 of wall thickness a) 50 mm dia UPVC pipes
b) 40 mm dia UPVC pipes
c) 32 mm dia UPVC pipes
608.2) Providing & fixing of CPVC pipes confirming to IS 15778:2007 ASTM D-2846 standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collar a.)20mm dia
b.)25mm dia
c.)40mm dia from STP to OHT
609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2)
609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2)
609.6.2) Supply and delivery of 200mm OD ribbed screen pipes (6kglcm2)
609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) i) l50mm dia casing pipes assembly
ii) 200 mm dia casing pipes assembly
615.2.1) Labour charges for the erection of submersible pumpset in Borewell/open well
615.3.1) Supplying, delivery of DOL panel control board with ISI mark for three phasing wall moulding type Ammeter, Voltmeter ON/OFF switch etc.,
615.3.5) Supply and delivery of MS Fabricated DOL panel control board with ISI Mark for single phase
616.4.4) Supplying and delievery of the following dia HDPE pipes a). 40 mm dia HDPE 10 Kg/cm2 pipe
619.2.1) Supplying and fixing the following G.I Specials. a. 50 mm non return valve
b. 50 mm Gate valve
a. 40mm GM gate valve
b. 25mm GM gate valve
620) Supply, delivery and fixing of the following dia stainless steel pipe Nipple a. 40mm stainless steel pipe nipple (300 x 400)
b. 20mm stainless steel pipe nipple.
c) 20mm CP extension nipple
707.3.1) Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE
725.3) supply and fixing of MS box of suitable size for the termeination of cable
741.1.1) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection
794.1) Painting the ceiling with one coat Plastic Emulsion PAINT including . Primer
799.2) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using " DTH Ring" (a) Drilling of borewell in rock area
799.3) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity
799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell
832.5.2) Supplying and fixing in position of UPVC window of casement type( open) for all sizes
832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes
922.4) Supply and installation of 0 - 100 PSI pressure gauge and pressure switch
929.2) Supply & installation of photoelectric type smoke detectors in electrical room
929.5) Supply ands installation of manual call points with hammer. To operate on 24 v dc supply.
929.6) Supply ands installation of electronic hooter 5 watt capacity wall mounting type.
929.8) Supply and installation of ABC type fire extinguishers wall mounting type ,
930) Supply and installation of 2 way fire brigade inlet connection
931.1) Supply and Fixing of Stainless Steel Mosquito Net
931.2) Supply and Fixing of Main Curtain with lining cloth, curtain stitching, curtain rod including fixing
941.4.4) Supply and installation of hose reel drum swing 180 deg type with 19 mm rubber hose, 35 mtrs length, stop nozzle, and gate valve 19mm dia.
941.7) Supply and installation of cast iron butterfly valves with operating handle marked open/ shut. 65 mm dia
941.8) Supply and installation of cast iron non-return valve, swing check type slimseal. 65 mm dia
941.9) Supply and installation of MS pipe B class with fittings 65 mm dia
942.9) Supply and Erection of 12 zone Automatic fire alarm panel with fire and fault indications, lamp 230 V AC single phase supply.
947.4) Supply and installation of air release valve
957.9.7) Supplying, laying and fixing of 32 mm dia CPVC (Chlorinated Poly Vinyl Chloride) Pipe
Lift Arrangements 958.4) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity Passenger lift (G+4 floor)
958.6) Preparation of necessary drawings for both Lift sets for approval by Chief Electrical Inspector to Government / CEA, obtain approval for Lift
GENSET 959.1) Erection, Testing and commissioning of 62.5KVA Diesel generator set.
959.4) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
959.5) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.
959.6) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool a
959.8) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA,
959.9) Providing safety equipments: CO2 fire extinguisher : 1 No.; 9 ltrs capacity fire buckets: 3 Nos., & rubber mat : 1 No.
960.3.1) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)
960.3.2) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.
NUMBERING AND LETTERINGS 960.4.1) Supplying aud fixing of Aluminium TNPHC Emblem of 30" height
960.4.2) Supplying and fixing of 12" height Aluminum letters
960.4.3) Supplying and fixing of 6" height Aluminium letters
960.4.4) supply and fixing of 20"x 5" size plastic foam name plate with vinyl cutting letter
960.4.5) Supply and fixing of 24" x 8" size plastic foam mane plate with vinyl cutting letter with approved colours
960.4.6) Providing Texture Finish over the Existing Plastered wall Surface using Duracast crosstex with desired pattern (Rainfall, vertical, Horizontal of 2 to 2.5mm thk)
960.4.7) Providing ornamental border design for button shape works (9" x9") 25mm thick Projection /Stapay works
961) Towards Fabrication, supply and installation of of CT metering box for availing the power supply from TANGEDCO
961.6) Supply and installation of water purification with drinking water RO plant 500 LPH with UV system and all accessories
963.7) Wiring for the following speaker points with 2C x 1.5 sq.mm PVC sheathed copper conductor 1100 volts grade armoured FRLS cable
CCTV arrangements 964) Supply, installation, testing and commissioning of outdoor type UL/UE/FCC Listed 2MP 36X optical and 12X digital Pan/Tilt/Zoom Day Night cameras
964.1) Supply and installation of IR Dome Camera 700 TVL with 3.6 mm lens - indoor
964.2) Supply, Installation, testing and Commissioning of 32 channel Network Video Recorder Storage @ 720P with 20 FPS for 60 days recording with 2 SATA 2nos. hard disk
964.3) Supply, installation, testing and commissioning of 50" Colour Monitor with associated mounting Brackets as required.
964.4) Supply and installation of CAT 6 LAN Cable for CCTV
964.5) 24 Patch Card and Patch Panels required for the above cameras with all accessories
964.6) Pole Mounted including cost of 4 M high GI pole
Lighting Arrester 971.1) Supply and installation of Advanced Early Streamer Emitter type Lightning arrestor made of AISI 316 Stainless Steel
971.2) Supply and Installation of copper 18mm Copper Rod size of 8 feet length buried in earth
971.3) Supply and Installation of 50mm dia GI mast of 5 Mtrs length with insulators, enamel painted
971.4) Supply and installation of 70 Sqmm copper braided/Solid sheathed cable run on the external wall from terrace to the ground floor.
971.5) Supply and fixing of Emergency EXIT LED wall mounted Lights near staircase
983) Supplying, installing, testing and commissioning approved make music source consisting of DVD player, tape deck etc
983.4.1) PUBLIC ADDRESS SYSTEM (TWO WAY COMMUNICATION TYPE) Multichannel solid state mixer amplifier in amplifier rack. The amplifier shall be of 480 W RMS output with complete wiring and controls, accessible from front.
983.7.1) Supplying, installing, testing and commissioning W wall / ceiling mounted loud speakers approved make a) 6 W wall / ceiling mounted loud speakers
b)15 W wall / ceiling mounted loud speakers
Fire Fighting and Fire Alarm System 985) Supply and installation of 200 GPM fire fighting pumpset 35 mtrs head monoblock type Kirloskar/Equivalent
985.1) Supply and installation of Direct online starter for the 5.0 HP motor make L&T / bhartia cutler./Equivalent Automatic operation
K BASKARAN
PTM PROJECTS PVT LTD
Haarine Associates
VIJAY RANI CONSTRUCTION
Britto Dhanasekaran
J C ENGINEERING CONSTRUCTION COMPANY
Bidder Name
PTM PROJECTS PVT LTD
BHARATH BUILDING CONSTRUCTION
J C ENGINEERING CONSTRUCTION COMPANY
K BASKARAN
Haarine Associates
VIJAY RANI CONSTRUCTION
Britto Dhanasekaran
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .