S/R of residence building sub division Ramshehar (SH Repair door window and laying kota stone).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately Kiln seasoned and chemically treated hollock wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Kiln seasoned and chemically treated hollock wood .

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of all labour equipment including carriage of materials within all leads and lifts

Painting White washing with lime to give an even shadeNew work (three or more coats)including carriage of all labour equipment including carriage of materials within all leads and lifts

Finishing walls with textured interior paint of required shade (Two or more coats applied @ for external plaster are for height upto 3.28 ltr/10 Per square meter ( three point twenty eight litre per ten square meter) over and including priming coat of exterior primer applied @ 2.20kg/10 Per square meter ( two point twenty litre per ten square meter) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing Mild Steel Tower Bolt of delay to Required Colour and shade with Bolt & Nut screw 250x10mm

Providing and fixing Mild Steel Tower Bolt of delay to Required Colour and shade with Bolt & Nut screw 150X10mm

Providing and fixing Mild Steel handle of delay to Required Colour and shade with Bolt &Nut screw 125mm

Providing and fixing Mild Steel handle of delay to Required Colour and shade with Bolt &Nut screw 100mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard .

Providing and fixing mild Steel hinges (heavy) type 75x65x4 mm weighing not less than 200gms

Providing and fixing mild steel Soap Dish complete with Mild steel Brackets Fix to wooden plugs Screw asper HPPWD Specification.

Providing and fixing 150 mm bright finished floor Mild Steel door stopper with rubber cushion, necessary etc. to suit shutter thickness complete.

Providing and fixing 19 mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative andother side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges to IS:3818 marked with necessary screw etc all complete

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)19mm thick

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046Type S, including cost of adhesive of approved quality 1.0mmThick

Supplying and Fixing new Wooden Fillets wherever necessary :19x6mm Deodar wooden Fillets

Providing and Fixing 6.00 mm ply of standerd quality ISI marked and approved shde with screw and nail complete