Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹27.3 L+₹86,195 (3.26%)Rejected-Finance 1252 SECTOR 15 PANCHKULA 134113 | PANCHKULA | HARYANA | 134113 | L2 | Rejected-Finance L2 | |
| 3 | L3₹27.9 L+₹1.5 L (5.50%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance L3 | |
| 4 | L4₹28.7 L+₹2.2 L (8.47%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹30.7 L+₹4.3 L (16.1%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-21/2023-2024 REPAIR TO ROOF CHAJJA VENT PIPE JOINERY AND CONNECTED ITEMS OF BLDGS IN FAFA SUNRISE AND MAP COLONY UNDER AGE B/R I AT CHANDIMANDIR
2023_MES_595217_1
GE/CHM-21/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹80,000
Yes
5 Sept 2023
13 May 2023
17 Jun 2023
13 May 2023
10 Jun 2023
27 May 2023
Amount
Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed.
Taking down, chipping and removing the loose, split, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforcement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 12 metre (Appx) complete all as specified and as directed. Note:- Make;- Dr fixit/ Sunanda/chemestik/fosrock.
Supply only chicken wire mesh of size 12.5mm x 1mm complete all as specfied and directed
Reinforced cement concrete type B-1, 1:2:4 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed Note : Reinforcement and form work shall be measured and paid separately
Mild steel high strength deformed TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
Material and labour for form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.
Raking out joints/ pointing to brick work in walls , on edge in floors, surface channels, roofs, etc and Flush pointing in CM(1:3) to brick on edge ,laid flat, or brick tiles in pavings , all as specified and directed.
Cutting down small trees / bushes from wall/roof/chajja of building including digging out the roots from brick work or any other structure portion of building including applying root killer chemical as per manufacturer instructions and making good the disturbed portion to match the existing surface complete all as specified and directed
Disconecting of PVC tank of capacity 500 Ltrs & upto 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatment of roof slab beneath the tank in following laid down porcess all as specified and directed :- (a)Dewatering & removing all ettled silt, scale & dust from inside of tanks uing coconut brush manually and applying bleaching powder and allowed to rest for 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 minutes. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Refixing the tank & old fittings in same position or raised / lower height after cleaning or water proofing treatment (as may necessary) complete all as specified and directed. NOTE : Alternative arrangement for providing water supply to the Qtr shall be provided by the Contractor by relocating the serviceable tank until the water proofing treatement is completed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
Roughening surface of old concrete floor by picking, seeping clean and washing down with water to remove dust etc incuding brushing neat cement slurry with 3.0kg of cement per Sqm, complete all as specified and directed.
PCC 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in padding (50mm thick average thickness), finished even and smooth without using extra cement complete all as specified.
APP based polymeric membrane 3mm thick, minimum weight 3 kg/Sqm , reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application on and including bituminous primer @ 0.40 ltrs per square metre and including taking down oll APP sheet ,complete all as specified and directed.
Machine pressed precast cement concrete tiles 250mm x 250mm x 20mm thick laid over and including 15mm thick cement mortar 1:4, jointed and pointed flush in cement mortar 1:3 complete all as specified and directed
40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.
All as per item No 16 here-in-before but except tiles.
APP based polymeric membrane 3mm thick, minimum weight 3 kg/Sqm , reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application on and including bituminous primer @ 0.40 ltrs per square metre and finally applying one coat of silver aluminium paint over APP membrane including taking down oll APP sheet ,complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including PTMT tank nipple, float valve of 20 mm bore etc, fixed as in repairs complete all as specified and directed.
500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed.
Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 250 litres but n.exc. 500 litres and mouths or circulating pipes , complete all as directed.
Cleaning and removing all scale, silt , mud or dirt from overhead water storage tanks of capacity exc 500 litres but n.exc. 1000 litres and mouths or circulating pipes , complete all as directed.
15mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs,complete all as specified and directed.
20mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs,complete all as specified and directed.
Float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repairs, complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.
Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs of mud stops, rounded or chamfered on edges usingincluding necessary form work, complete all as specified and directed.
Supply only Integral waterproofing compound, all as specified.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete surface of roof with mixing of WPC, finished even and fair without using extra cement complete all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, complete all as specified & directed.
10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.
Two coats of oil bound distemper over a coat of primer including preparation of new surfaces (plastered / unplastered) and applying wall are putty, not less than 2mm thick on wall including prepartion of plastered surface complete all as specified and directed.
Preparation of new plastered surfaces of walls, applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Preparation of new plastered ceiling surfaces, applying two coats of oil bound distemper, complete all as specified and directed.
110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches, fixed as in repair complete all as specified and directed by Engineer-in-charge.
110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed on wall, fixed as in repair complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) bend any radius, fixed as in repair complete all as specified and directed
Cast iron soil, waste and vent pipe 100mm dia bore (ISI Marked) spun pipes, in any length with or without ears, in cement joint, fixed in walls etc, fixed as in repair complete all as specified and directed.
Cast iron soil, waste and vent pipe 75mm dia bore (ISI Marked) spun pipes, in any length with or without ears, in cement joint, fixed to wall, fixed as in repair complete all as specified and directed.
Cast iron bends (any radius), diminishing pieces or tapers (large bore measured), suitable for 75 mm bore pipes, ISI marked, fixed as in repairs, complete all as specified.
All as per item No. 48 herein before but for 100mm bore .
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Plain cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed.
50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.
Plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.
Concrete interlocking pre polished paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 40 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning, complete all as specified and directed
Concrete interlocking pre polished paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning, complete all as specified and directed
Factory made coloured chequered cement concrete tiles 300mm x 300mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Taking down shutters of any description n.exc 1 sqm and removing to store complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed.
Taking down wooden chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down wooden chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Steel window, box type, in repair primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter complete all as specified and directed.:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 61 hereinbefore but ventilator with top hung shutter
Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type B-21 complete all as specified and directed.
Cutting holes in brick walls built in cement mortar (exc. half brick but not exc. one brick ) and making good the surfaces by cement mortar (1:3) or PCC (1:2:4) type B-1, complete all as specified and directed.
2nd class hardwood (hollock) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified & directed.
Factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete, all as specified & directed.
Factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete ,all as specified and directed.
PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in filling in steel frame complete all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood (Hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Half panelled and half glazed and skeleton shutter 35mm thick of second class hard wood (divided into sub panels with provision of one vertical rail upto full height),open rebated & prepared to receive glass, gauge etc , edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc ,complete all as specified & directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels, commercials type on both sides, complete all as specified & directed.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
150 mm aluminium handles cast type complete all as specified and directed.
150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.
200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.
Aluminum alloy, anodized, sliding door bolt (ISI Marked),300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.
300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed.
150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.
Aluminium door seal brush, fixed with steel screws to bottom rail of the door shutter, Fixed in repairs,complete all as specified.
Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.
Preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.
Powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium partition/ door /window/ventilator shutters made of aluminium sections (wall thickness of aluminium section not less than 2mm) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glazing and wire mesh shall be measured & paid separately under respective items . (iii) Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
Hacking out old broken glass ( any thickness) size quality etc from any type of frame fixed with pin, beading or oil putty complete all as specified and directed.
4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.
Galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed as in repairs, complete all as specified and directed.
20mm dia mild steel , PVC coated (coloured) as in drapery rod including brackets, end caps etc fixed as in repair, complete all as specified & directed.
20mm dia stainless steel , drapery rod including brackets, holder, endo brackets etc fixed as in repair, complete all as specified & directed.
Mortice lock, verticle type, 2 levers, size 100mm, aluminium body, complete all as specified and directed
18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe fitted to chowkhats, with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.
18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping on exposed edges fixed with nails, fixed as in repair complete all as specified and directed .
Continuous (piano) hinges, mild steel bright finish, width of flap when open 30mm, fixed as in repair complete all as specified and directed.
150mm hasp and staple,aluminium anodised, wire type, including bolt to hinge plate and fixed with screws, fixed as in repair complete all as specified and directed.
40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.
Material and labour for magnetic catcher or ball catcher with 8mm dia steel ball and brass body and striking plate including letting in, fixed as in repair complete all as specified and directed.
Stainless steel powder coated tray of various sizes fixed in drawer to keep the kitchen utensil, fixed as in repair complete all as specified and directed.
Stainless steel telescopy channel normal, complete all as specified and directed.
Plate rack 1.00mm thick stainless steel sheet of size 900mm x 750mm x 300mm , with steel shelves and hanging arrangement for utensil, fixed as in repair complete all as specified and directed.
Welding in repairs, n.exc 2.5 cm in length, thickness of metals to be welded exc 6mm but n.exc 9mm complete all as specified & directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.
Dismantling of posts or struts of (wood /stee/RCC) any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed
Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Pre-painted galvalume aluminium zinc (AZ-70) coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc , including dismantling of old sheet of any description complete all as specified & directed by Engineer-in-charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed
Non skid ceramic tiles, jointless, first quality, coloured size 300mm x 300mm x 7mm thick, in floor in patches of matching with existing (area n.exc 3.00 Square metre) set and jointed with neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Glazed coloured ceramic tiles in vertical surface 350 x 450 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Vitrified ceramic tiles 8-10mm thick Light shade (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 115 herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:4 –ditto-
Granite slab 16-18mm thick (of any type & shade as approved), as on cooking platform, counter slab etc (length and width as ordered by GE in one piece) best quality machine cut and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of slab laid over and including 15mm thick screed bed in cement mortar 1:4 including nosing at edges, rounded edges complete all as specified and directed.
Filling of white or coloured cement to match the colour of tile in hungry joints of glazed tiles not exceeding 1.0 RM each complete all as specified and directed.
Bathroom mirror cabinet , size 400mm x 500mm fixed with and including chromium plated brass screws and PVC rawl plugs, fixed as in repair complete all as specified and directed.
PVC smart shelf of size 450mm above WHB with screws complete all as specified and directed.
Peg hook set of 6 of aluminum body, complete all as specified and directed.
Toilet paper holder, cast copper alloy, chromium plated, fixed in position in repairs, complete all as specified and directed.
Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including angle brackets fixed as in repair complete all as specified and directed.
Vitreous China wash basin, angle back, size 400x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed as in repair complete all as specified and directed.
CP brass waste coupling / waste fitting with long shank, half thread, 32mm bore for kitchen sinks,wash hand basin, fixed as in repair complete all as specified and directed.
32mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
Vitreous china counter top wash hand basin of size 440 x 470 x 130mm mounted on granite stone slab platform by cutting for coupling etc, fixed as in repair complete all as specified and directed.
Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, having water seal of 25mm, suitable for 32mm bore pipe, fixed as in repair complete all as specified and directed.
Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs, complete all as specified and directed.
CP brass waste coupling / waste fitting with long shank, half thread, 40mm bore for kitchen sinks,wash hand basin, fixed as in repair complete all as specified and directed.
40mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
Grating doom 125mm dia of PTMT (minimum weight 40gms) fixed in repairs complete all as specified and directed.
Soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.
Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repairs complete all as specified and directed.
Vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including makes connection to trap & flushing pipe, set in cement concrete and making good to the floor, fixed as in repair complete all as specified & directed by Engineer-in-charge.
Vitreous China, semi-pedestal pattern (Anglo-Indian Type) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc (excluding flushing cistern & flush pipe) fixed as in repairs complete all as specified & directed.
Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) fixed as in repair complete in all respect all as specified.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
Brass, chromium plated, tubular towel rail 20 mm dia, fixed as in repair complete all as specified and directed. MAKE : NOVA / SIEKO
Supply and fixing Brass, chromium plated, tubular towel rail 20 mm dia. ‘D’ type, 60 cm long between flanges including brackets, fixed as in repair complete all as specified and directed.
Chromium plated hand jet (health faucet) for 15mm bore pipe with 100cm long flexible tube, including fixing of hook on wall, fixed in repairs, all as specified.
Flsuhing jet for pedestal pattern WC including flexible pipe and brass chromium plated nuts, fixed as in repair complete all as specified and directed.
18mm thick solid PVC shutter made out of 18mm celuka printed and UV coated sheet cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25" Mild steel screw to the frame with the channel in and including hinge. Handles . complete the work according directions of Engineer-in-Charge, complete all as specified and directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .