AGAMT-II - 2025-26 works in Agalankan Panchayat in Nagapattinam Block

Amount

01.Providing Cement Concrete Road Thirupanikottor Keelatheru in Agalangan Panchayat 50M

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Sand filling with good river sand including cost and conveyance of sand including all labour charges for filling and compacting etc. complete. required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Cement concrete 1:2:4 mix (one cement four sand and eight hard broken stone) using 20mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete for CC road.

Plain Cement concrete 1:3:6 using 20mm hbg jelly for dummy column

Providing Bitumen pad for expansion joint in cement concrete road as per specification

Supply and erecting Shuttering including necessary supports for plane

Provision for Name Board Charges

02.Providing Cement Concrete Road Agalangan Keelatheru in Agalangan Panchayat 45M

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Cement concrete 1:2:4 mix (one cement four sand and eight hard broken stone) using 20mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete for CC road.

Plain Cement concrete 1:3:6 using 20mm hbg jelly for dummy column

Providing Bitumen pad for expansion joint in cement concrete road as per specification

Supply and erecting Shuttering including necessary supports for plane

Provision for Name Board Charges

03.Providing Cement Concrete Road Moongikudi Thoopu theru in Agalangan Panchayat 80M

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Sand filling with good river sand including cost and conveyance of sand including all labour charges for filling and compacting etc. complete. required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Cement concrete 1:2:4 mix (one cement four sand and eight hard broken stone) using 20mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete for CC road.

Plain Cement concrete 1:3:6 using 20mm hbg jelly for dummy column

Providing Bitumen pad for expansion joint in cement concrete road as per specification

Supply and erecting Shuttering including necessary supports for plane

Provision for Name Board Charges

04.Construction of Anganwadi building at Agalangan Panchayat.

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers with inital leads and lifts, etc. Including leveling the sites complete complying with standard specifications and as directed. In sand or other loose soil, wet sand not under water, silt, light black cotton soil, sandy loams and ordinary soil. TNBP SS NO 20B 23 & 24 I Depth (G O No. 26/27.02.2014)

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed, watered and compacted complete complying with standard specification. TNBP SS NO 24 & 25

Supplying and filling of conveyed earth with a lead of 1Km for basement filling

Cement concrete 1:4:8 mix (one cement four sand and Eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete complying with standard specification and as direceted TNBP SS NO. 28

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Upto basement

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Above basement

Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. Upto basement

Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. For Superstruture.

Supplying and applying of two coats of Putty of 3mm thic over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be throughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. IT shall then be sand papered (water Proof abrasive sheet) to give a smooth and evern surface. Any unevenness shall be made good by applying 1st coat of Putty mixed with water on the entire surface including filling up the undulations and applying 2 coat of putty after 6 hours of 1 St coat of Putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface Smoothly etc., complete complaying with standard specifications and as directed by the Departmental officers. (The rates are inclusing of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty, scrapping the putty area to level the surface smooth etc., complete). The Putty, Scrapping the Putty area to level the surface smooth etc., complete). The Putty should be got approved by the executive engineer before use on work. (Based on SoR 2024-25)

Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Painting the plastered wall surfaces with two coats oil bound distemper (inside the building) of approved quality and colour over one coat of wall primer including clearing surface in all floors etc complete with standard specification

Painting the newly plastered wall surface with two coats of Plastic Emulsion paint the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification.

Dadoing the walls with Ceramic tiles using CM 1:3 mix including cost and conveyance of all materails to work site including all labour charges etc .,comlete

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with Granolithic flooring to 25mm thick using CC 1:2:4 mix using 20mm ISSHBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete.

Painting two coats with ready mix paint of approved colour and trade for doors & windows including cost and conveyance of all materials and all other labour charges etc., complete.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 x 25 x 3mm at 1.419kg/m and mullion "J" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0,70kg/m at 3Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly.

Supplying and Fixing Ventilator N-Type

Fixing Steel Doors

Fixing Steel Windows

Supplying cuddapah slab of thickness 20/30mm.

Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding laid over country wood (silver Oak) joists of size 10 cm x 6.5 cm spaced at 90cm centres and supported by casurina props of size 10 - 13cm dia spaced at 75 cm centres including necessary cross bracings\ etc., complete complying with standard specifications 10 m2 Shuttering.

Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding laid over country wood (silver Oak) joists of size 10 cm x 6.5 cm spaced at 90cm centres and supported by casurina props of size 10 - 13cm dia spaced at 75 cm centres including necessary cross bracings\ etc., complete complying with standard specifications 10 m2 Centering.

Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete.

Supplying Baby type Indian Water Closet as per Specification.

Supplying European type Indian Water Closet as per Specification.

Supplying & Filling Brick Bats in RWH

Supplying and fixing rain water PVC rain water down fall pipes of 4kg/cm2 variety of 110mm PVC Pipe including charges for fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete.

Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe consealed on wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with T.W. switch box and 5 A F.T switch making good of the conceakled portion with suitable colour for PVC consealed light/Fan Point. SD No. 24.

Supply and fixing of CF lamp fitting including angle holder.

Supplying and fixing 1200 mm (48") AC ceiling fan with stepped regulator 300W regulator with 1m down rod on the existing clamp. SD No. 106.

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.

Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113 mm T.W. switch box for 5 A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connetion of 14 SWG TC wire for PVC plug point. SD No. 34

Supply and fixing of WT Bulk head fitting with guard (Philips/Bajaj/Crompton/K,lite) suitable for incandescent lamp with 60 W bulb. SD No. 80

Supply and fixing of 16 Amps DP switch with metal clad of 500V with fuse and neutral (side handle) on suitable TW box with PWD earthing. (SD No.136)

Supply and fixing of TNEB meter Board suitable for 32 A single phase service connection with 32 A fuse (500 V) 32 A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375 mm x 300 mm x 40mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire EB meter to fuse unit. (SD No 121)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade in 25mm dia Gt pipe (Glass 'B') bent at both ends with necessary angle iron up right and end supports for mains (S.D. No.64)

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From electric Post to service pipe) (SD No.64)

Supply of 110mm dia pvc pipe

Supply of 75mm dia pvc pipe

Supply of 75mm dia cowl

Supplying RCC Rings of inner dia 0.90m

Supplying RCC cover slab for RCC Rings

Supplying 25mm PVC Pipe

Supplying 25mm PVC Elbow

Supplying 20mm Tap

Supplying 500l Syntex Type Water Tank

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Supplying and filling in foundation and basement with filling sand including water consolidating etc.,

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method)

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Plain Cement concrete 1:3:6 using 20mm hbg jelly for dummy column

Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 60MM and compacted over a thin bedding sand layer of 30 mm thickness and joints shall be filled by fine sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.

Supply and erecting Shuttering including necessary supports for plane

Provision for Name Board Charges

05.Improvement to Burial ground Cc road 28M ,Compound wall 15M and Street Light 5Nos @ Agalangan Panchayat

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Sand filling with good river sand including cost and conveyance of sand including all labour charges for filling and compacting etc. complete. required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Upto basement

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Above basement

Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. Upto basement

Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. For Superstruture.

Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and erecting steel centering for Plane surfaces RC slab, beam, lintel bed block landing slab waist slab etc., Below GL

Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete.

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Sand filling with good river sand including cost and conveyance of sand including all labour charges for filling and compacting etc. complete. required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete

Cement concrete 1:2:4 mix (one cement four sand and eight hard broken stone) using 20mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Complete for CC road.

Plain Cement concrete 1:3:6 using 20mm hbg jelly for dummy column

Providing Bitumen pad for expansion joint in cement concrete road as per specification

Supply and erecting Shuttering including necessary supports for plane

Provision for Name Board Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V SUNDARARAMAN (BID ID -1288303)