Construction of Multi-Disciplinary Sports Complex at KhanikarDibrugarh District under NLCPR (External Electrification Works)

Amount

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.C Series(Schneider MG, legrand, Hager make) 6 to 32 A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.C Series ABB,Schneider,MG Legrand,Heger make) 6 to 32A

Supplying and fixing of 40 mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) for street light water tight bracket including bending to shape and Wiring with 1.5 sq. mm size aluminium weather proof PVC cable etc.. as required.

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following 25mmX5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following size 25mmX5mm Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying, erection, testing and commissioning of 15 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral flood light luminaries with 2 nos 400 W HPSVT lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make) twin dome aviation obstruction lights of with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 6 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS/ PARUTHI ENGR make) Supply of 6 nos. non-integral flood light luminaries with two nos 400 W LED lamps and its control gear boxes. Supply of twin dome aviation obstruction lights of with Neon spiral lamps. Supply of control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour. provision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require . Erection of the above panel on suitable foundation including all materials and labour.

Supplying, erection, testing and commissioning of 30 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral flood light luminaries with 2 nos 400 W HPSVT lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make) twin dome aviation obstruction lights of with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 12 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS/ PARUTHI ENGR make) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. Supply of 12 nos. non-integral flood light luminaries with two nos 400 W LED lamps and its control gear boxes. Supply of twin dome aviation obstruction lights of with Neon spiral lamps. Supply of control panel housing 63 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour. provision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require . Erection of the above panel on suitable foundation including all materials and labour.

Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items. 1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no 2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos. 3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set 4. 40 Amp 4 pole ON-OFF poser contactor - 1 No. 5. Surface mounting timer switch - 1 No. 6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos

APFC (ABB/ SCHNEIDER/ CROMPTON GREAVES/ C&S/ SIEMENS/ L& T OR EQUIVALENT MAKE AS APPROVED BY THE Deptt.) Supplying including installation testing and commissioning of 400kVAr, 440V APFC Panel Non-Compartmentalized Type, Free Standing, Floor Mounted rated Output 400kVAr rated Voltage 440V rated Frequency 50Hz Number of phases 3 Phase Switching Option Auto-Manual ENCLOSURE DETAILS Material CRCA Thickness of sheet steel Frame & Doors: 2.0mm, Partitions: 1.6mm, Gland plate: 3.0mm Dimensions W x H x D (mm) 800 x 2000 x 600 (Approx) + (250 mm for plinth & fan hook Ingress Protection IP 42 Installation Type Indoor Cable Entry Bottom Colour RAL 7035 - Light Grey BUSBAR DETAILS Material Aluminium Cross Section (mm) 40 x 10 x 2 Run Bus bar Supports DMC Moulded CAPACITORS Heavy Duty @ 440V No of Steps 8 Step details in kVAr Refer BOM SWITCHGEAR DETAILS Incomer MCCB, 800A, 36kA CVS Type Switching Capacitor Duty Contactors Step Protection MCB/MCCB APFC RELAY Type Schneider/ABB RT, 8 stage INCOMERMCCB, MCCB, 800A, 36kA CVS Type Digital Volt - Amp Freq meter 1 Phase Indicating Lamps (L1, L2, L3) 3 Current Transformer - 800/5A 3 APFC Relay 1 Fans 1 Control Circuit Protection - MCB 2 Step Indicating Lamps 16 On / Off push buttons 16 Step protection - MCCB, CVS Type, 25kA - 100A 1

Supplying including installation, testing and commissioning of Solar power plant as per following specification and as directed by the Department. 5.12 KWp STANDALONE SOLAR POWER PLANT Load: 4000 Watts for 4 Hrs/Day Back up Or, Load: 2000 Watts for 8 Hrs/Day Back up Crystalline Solar PV Module - TBP1280M/ TBP1280 with RDSO Part-I Approval (as per IRS S: 84/92 or latest Amdt.) & IEC: 61215 Certification. 64 nos 3 4 Module mounting structure with theft proof frame 16 nos 4 Array Junction Box (AJ 2 nos 5 Main Junction Box (MJ 1 no 6 Power Conditioning Unit (PCU) – 96V DC- 5KVA- 230V AC, 50Hz 1 no 7 Battery Bank- Tubular Plate LMLA Battery Bank of 96V, 400Ah @ C10 1 set 8 2C X 2.5 Sq.mm. P.V.C Cu.cable 300 metres 9 2C X 6.0 Sq.mm. P.V.C Cu.cable 100 metres 10 2C X 10 Sq.mm. P.V.C Cu.cable 30 metres 11 1C X 25 Sq.mm. P.V.C Cu.cable 30 metres 12 1C X50 Sq.mm. P.V.C Cu.cable 15 metres 13 Earthing kit 6 nos 14 Installation kit 1 set Note: All cable lengths are estimated. Extra cables, if any, shall be charged extra at actual. All cable Lengths are calculated from the Solar Array to input of the Power Conditioning Unit (PCU). Loads & Load cables are not included in the Bill of Materials. SUGGESTED UNIT PRICE Unit Cost Without Installation & Commissioning)

Installation & Commissioning Charges

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4.00Sq mm 3 core armoured U G cable

6.00 Sq.mm 3 Core armoured U.G. cable

3 & 1/2 Core A2XFY 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) Core - 2 A2XWaY A2XFaY 4.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

6.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

Core - 3 & 1/2 A2XWY A2XFY 25.00 Sq.mm 3&1/2 Core U.G. cable in 40mm dia medium duty G.I. pipe

70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

120.00 Sq.mm 3&1/2 Core U.G. cable in 65 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

240.00 Sq.mm 3&1/2 Core U.G. cable through 100mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

300.00 Sq.mm 3&1/2 Core U.G. cable in 100mm dia medium duty G.I. pipe

Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 120 cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 70mm 3 Core armoured 11 KV H.T. U.G. cable

Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid through medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) / partially in air as required for connection as directed, including excavation of trench, refilling reconstruction of damaged done to road, drain, wall et as specified by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 70mm 3 Core armoured 11 KV (H.T. U.G. cable laid through 100mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) )

Supplying including installation of cast iron cable marker as specified and directed by the deptt.

Supply including fitting and fixing of 1.1 KV PVC/XLPE cable INDOOR/OUTDOOR end termination Kits (Raychem RPG make) HEAT SHRINK TYPE including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 25.00 -50.00 Sq.mm., 3/ 3.5/ 4 Core cable.

705.00 -150.00 Sq.mm., 3/ 3.5/ 4 Core cable.

185-300 Sq.mm., 3/ 3.5/ 4 Core cable.

Supply including fitting and fixing of 11 KV ( SCREENED XLPE cables heat shrink type three core HT cable outdoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 50.00 to 95.00 Sq.mm., three core cable.

Supply including fitting and fixing of outdoor cable Junction Boxes IP 66 halogen free and weather proof for outdoor installation ( with metric knockouts for cable entry) on existing pole with clamp nut &bolts, including all accessories complete as specified and directed by the Deptt. cable size4 sq.mm box size 98 x 98 x 61 all in mm

cable size 16/25 sq.mm box size 200 x160 x 98 all in mm

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 750 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.

Supplying and erection of L.T. stay set complete (Galvanize with 19mm dia x1.8m long stay rod anchor plate of size 30cm x 30cm x 6.4 mm thimble stay clamps tube buckle (19mmx 60c 7/14 SWG dia G.I stay and strain insulation etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate 40mm nominal size foundation including excavation and refilling etc. as required and as directed by the department.

Supplying and fitting fixing of galvanised L.T. T cross arm complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and fitting fixing of galvanised channel of 75 mm x 40 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and fitting fixing of galvanised Angle of 50 mm x 50 mm x 60 x 5000 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and fitting fixing of galvanised channel of 100 mm x 50 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and erection of 11 KV Pin insulator (Poly) with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department.

Supplying and erection of 11 KV Disc insulator (Poly) 45 KN with hard ware fittings etc. as required and as directed by the department.

Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department.

Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department.

Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly) set complete as required and as directed by the department.

Supplying and fitting fixing pole clamp complete as required and as directed by the department.

Supplying and fitting fixing of P.G. clamp for Racoon conductor complete as required and as directed by the department.

Supplying and string up AAAC Racoon conductor in the existing P.S.C./ M.S/ Galvanized pole with binding etc. as required and as directed by the department. Directed by the department.

Supplying including installation of 4' dia. C.I. earth pipe complete as required and as directed by the department.

Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department.

Supplying, erection and commissioning of the following specification as per IS:2713 : 410 SP hot dip Galvanized Steel tubular pole manufacturing out from electrically welded in 3 (three section having a base plate including providing all required building materials as directed and specified by the deptt. (BANSAL/SRP / Valmont / PARUTHI ENGR make) 410 SP 29, Length of pole = 9.00 metre., Length of sections, Bottom = 5.00 M, Middle = 2.00 M, Top = 2.00 M, Out side dia. & Thickness Bottom = 138.7 x 4.85mm, Middle =114.30.90 x 4.50 mm, Top =88.90 x 3.25 mm

410 SP 52 Length of pole = 11.00 metre., Length of sections, Bottom = 5.60 M, Middle = 2.70 M, Top = 2.70 M, Out side dia. & Thickness Bottom = 165.10 x 4.50 mm, Middle =138.70 x 4.50 mm, Top =114.3 x 3.65 mm

Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. i Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) Stiffener plate from arm of the following types : Double arm bracket 1500mm long for 11m to 12 metre. Poles.

Supply, Fitting Fixing of Shock Treatment Chart

Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade

Supplying including laying G.I. Wire 6, SWG as required and directed by the Department, including arrangement of Supervision Certificate from cmpetant authority of ASEB

Fabrication, supply and erection of 4.5 Mtr. Long 75mm dia MS pole with MS base plate of 300x300x10mm thickness at the bottom of the pole with fixing arrangement for post top lantern and to accomodate a junction box. The foundation is of cement concrete of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate) size 0.8 x 0.8 x .35 m3 with collar of size 0.4m dia x 0.5m height to accomodate the looping type cable end box including excavation and refilling etc. as required. The pole shall be painted with one coat of red oxide primer and two coats of aluminium paint.

Drawing of 11KV overhead line including necessary insulators angles frames stay wires etc. as necessary and load security deposit to be deposited to concerned Power Supply Agency including ASEB check meter

Shree Gautam Construction Co Ltd

M/s C.B Associate