15th FC Scheme 20232-24 - 2nd Instalment CTP -3

Amount

Dismantling of existing damaged structure including all tools and plants etc..complete

Desilting light or sandysoil or silt from Open wells below water level including the charges for special T&P and air compressor etc. complete.

Plain Cement concrete 1:2:4 (one cement, two Crushed Stone Sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing,etc., complete complying with standard specification 30 V, VI (S5) VII & 13

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 56 & 57

Plastering in C.M. 1 : 5 (one cement five sand)to 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other. 56 & 57

Plastering in cement mortar 1:4 (one cement Four Crushed Stone sand) using 20mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MoRTH Specification: Clause:1000/1300]

Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It mustprovide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. 61 V, VI (S4) 3.

Painting two coats over the new iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications

Supplying and Fixing of mild steel grills for windows, ventilators, etc., including priming coat design approved by the departmental officers including cutting, welding and cost of conveyance and all materials to work site.

Supply and delivery of single phase submersible pump set as per IS 8034 with suitable panel board 20lpm x 70m indcluding all cost and conveyance of all materials to site and all labor charges etc complete as per standard specifications.

Labour charges for erection of 2.00HP submersible pumpset in the borewell including fixing and jointing of submersible cable with proper clamps up to starter to the required depth and also fixing of riser pipe to the required depth valves erection clamps pressur gauge up to the exterior wall of the pump room and erection of panel board consists of TPICN switch,ammeter voltmeter three pilot lamps capacitor single phasing preventer water level guard and laying and jointing of cable and TWIN earthing as per IE Rules etc complete and testing the pumpset and trair run for 10 days etc complete

Supply and delivery of wall mounting type control panel board consists of Ammeter, voltmeter, single phase preventer, over load relay and all accessories suitable for 2.00HP submersible pumpset

Supply and run of 4 of 6sq.mm pvc insulated SC unsheethed Cu.Conductor of 1100V in suitable pvc rigid pipe on wall and ceililing with continuous earth wire of 14 swg TC wire painting of suitable wire etc complete (SD-52)

Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10- 1m3 For Foundation

Plain cement concrete Using 1:4:8 mix ( One cement , four Crushed Stone Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Random rubble masonry in c.m 1:5 (one cement five Crushed Stone Sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortor and cost of all materials and labour charges etc,complete as per SS..[MoRTH Specfication :Clause 1000/1400

Supply and run of 4 of 6sq.mm pvc insulated cable for sub mersible pumpset

Supply and delivery of following pipes and specials including cost and all conveyance charges etc complete 32mm pvc pipe

50mm GI Pipe

20mm Tap

50 mm Gm Gate valve

50 mm coupling

50mm GI elbow

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Reinforced cement concrete 1:11/2:3 (one cement one and half Crushed Stone Sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3

Supply, collection and filling of Gravel from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation properly etc complete. TNDSS No : 301 & 305

Supply of Interlocking Paver Block m40 grade Bounding and laying Paver Block of size of 83 mm thick high strength type confirming is 15658 - 2006 of Rubber mold Interlocking paver block in regained size of minimum compressive strength of 40 N/mm2 in uniform shape of approved non sticking make to be lend in flushing bone pattern with approved non sticking surface in the top and the rate including gravelling the base preparation of sub base with and cushion 100 mm thick laying out the pavement and the pieces in fit edge.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete

T KATHIRESAN