COMPREHENSIVE MAINTENANCE REPAIRS TO OFFICERS MD ACCN OF RANJIT ENCLAVE GYANI MARG ASHOKA ENCLAVE PERUMAL MARG KARGIL ENCLAVE OF AGE B/R C UNDER THE AOF OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for coloured designer tiles exterior grade area of each tile from 0.09 to 0.16 ( ENDURA OR Equivalent ) 20 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc.All as directed by Engr-incharge.

M&L for Double charged/GVT Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 450X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 80mm thickness grey cement and with pigment , M-35 grade incl 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for 15-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm thick Artificial Granite (of any type and colour ) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

Providing and fixing Gypsum Board false ceiling 10mm thick fixed with screw including GI frame work of section 40x60mmx1.25mm and as per manufacturers instructions

S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S&F 2nd class wood glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed.

S&F in repairs stainless steel wire cloth(304 grade) 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples Size of mesh in 20 mm mm complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

Ditto but of Frame size 65x 125 mm double rebate

S&F 28-30 mm thick Prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and including Extruded board CNC machine cut jali shutter inserted in between sketon and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S& F 1mm thick sunmica coloured/design/texure of decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions

M&L for preparation of New untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F powder coated aluminium sections for doors, partition including fabrication of frame and fixing with necessary with one or more rebates including joining cleat for fixing etc. complete all as specified by Engr-In- Charge.

S & F powder coated aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S & F bombay sliding powder coated aluminium three track sliding windows, including fabrication of frame size 92mmx 29.5mmx1.5mm and three track shutters frame size 40mmx 18mmx1.5mm( two glass shutters and one wiremesh shutter) and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of Glass panes/wire cloth will not be measured not paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.35 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F 4.00 mm disigner tinted glass thick area exc 0.50 Sqm in each pane with etching/tinted/film/frosted of approved design complete all as specified and directed

S & F 4.00 mm thick sheet glass area not exc 0.50 Sqm fixed in Door/windows shutters shutters etc complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames metal frames ,aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F in repair factory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F in repair factory made 100 % plain solid wood plastic composite (WPC) flush type shutter of 18mm thickness consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F auto soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 450 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete all as specified and as directed by engineer- in – charge. .Make- butterfly ,Hettich or equivalent

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill 3mm dia of wire (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge .Make- butterfly ,Hettich or equivalent

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.Make- butterfly ,Hettich or equivalent

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge..Make- butterfly ,Hettich or equivalent

S&F chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thickcomplete in all respect as specified and as directed by engineer- in - charge. Make- butterfly ,Hettich or equivalent

Supply chrome plated stainless steel wire basket with border of 5mm dia and inner grill of 3mm dia of wire (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.”.Make- butterfly ,Hettich or equivalent

S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

S&F Hasp and staple, safety type, MS with powder coated mild steel hinge pin including bolt to hinge plate and fixed with screws 150 mm size.

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F 100 mm long stailess steel (grade 202/304)Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F aluminium alloy floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F 150 mm long Extruded stainless steel (grade 202/304) handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm long stailless steel (grade 202/304)handles designer type, fabricated type polished complete all as specified and as directed.

S&F 75 mm long stailess steel (grade 202/304)handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm size stainless steel (grade 202/304)tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 150mm size stainless steel(grade 202/304) barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

M&L for 250mm long stainless steel (grade 202/304)sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F in repair 25 mm stainless steel(grade 202/304) curtain rod of thickness 1 to 1.25mm with decorative funnels complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460x460x230mm, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F vitreous china single piece EWC of Size: 360x640x685 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No SLS-WHT-6851P180PP/SLS-WHT-6851S220PP or equivalent in kohlar, grohe and Roca

S&F vitreous china single piece EWC bowl with cistern for extended wall hung WC of Size: 380x630x770 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No CNS-WHT-353SPPZ or CNS-WHT-755S220SPPZ Bowl with cistern for or equivalent in kohlar, grohe and Roca

S&F vitreous china Sensor Urinal of Size: 340x265x560 mm,wall hung urinal back inlet urinal with DC sensor, removable ceramic waste plug with water seal complete all as specified and directed Make cat part No Aurore of Somany or equivalent in Jaquar, grohe and Roca

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca

S&F Repair decorative type WHB Vanity floor mounted made out of coloured PVC board of PVC/HDHMR, wash basin, side cabinet with mirror complete all specified and approved by GE Make: Cat part No. Amara of Parryware or Equivalent in Hindware/Somany/Cera

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed. Make : Prayag or equivalent

S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca

S&F in repair Maze Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1619 & SHA 455L400 or equivalent in kohlar, grohe and Roca

S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. Cat Part no CAN -1173 of jaquar or equivenet in Kohlar, grohe and Roca

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed Make Jaguar (Cat Part No: AHS-1581H) or equivalent in kohlar, grohe and Roca

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower and shower stand complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5165 or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR-5005NB or equivalent in kohlar, grohe and Roca

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: ARI 39041 or equivalent in kohlar, grohe and Roca

S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.

S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks

S&F in repair rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.capacity of tank exceeding 250ltrs but not exc 500 ltrs

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.capacity of tank exceeding 500ltrs but not exc 1000 ltrs

S&F in repair15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in reapir 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in reapir 25 mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F in repair PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F in repair for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sqm) (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area shall be considered for measurement & payment purpose)

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

S&F in repairs 5mm thick mirrors with fixed with stainless steel bolt & nut and fixed to brick/stone masonry walls built in cement mortor etc complete all as directed.

S & F in repairs chromium plated fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs chromium plated fancy type Concealed Stop valves 20mm , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.47 to 0.50 mm thick 150 AZ of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. Make JSW

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47 to 0.50 mm thick 150 AZ of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.

M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering in 15mm on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

Ditto all as per above but except bricks

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

M & L for Providing high prestress precast ce- ment concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) MAKE :UNiversal or any Equivalent

S&F for 50 mm thick prestress precast cement concrete M-25 using compound wall (both Side smmoth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) (Note:columns/ poles will be measured seperately) MAKE :UNiversal or any Equivalent

S&F for 40 to 50 mm thick (1:3:6) precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.

M & L for cement concrete Type B2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.

M&L for applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over two coat of primerincluding preparation of decorated plastered surfaces of walls/ceiling complete all as specified and directed.

M&L Complete removal of existing treatment of wall complete all as specified and as directed.

M&L Preparation of plastered or unplastered surfaces including Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion distemper (white or tinted) on walls complete all as specified and as directed.

S&F in repair 12 mm thick toughned glass ( tinted/plain/froasted/film) with openable door of approved design including all fittings such as Bottom patch 163x50x31mm , with Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, Double action floor spring, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long and double action floor spring hydraulically regulatedheavy duty floor door closer of 10 year warranty complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint gobin or equivalent, make of fittings: hafele, hettich or equivalent.

S&F in repairs Toughned glass (10mm in thickness) fixed doors, partitions, windows and similar work including cutting to shape, drilling holes required and fixing the glass on said location with all necessary ss joining cleats and as specified

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels,plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement. all as specified and directed by Engr in charge

S&F in repairs Toughned glass (12mm in thickness) as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and fixing the glass on said location with all necessary joining cleats and as specified and directed by Engr-incharge.

M&L for applying 2mm thick wall care putty on wall complete all as specified and directed

S&F of 5mm thick ACP( aluminium composite panel) sheet on wall/coloumn/roof required to fixed with screws with required any shape icluding joint filled with silicon and approved colour by GE and complete all as specified and directed.

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan,Sintex/RAJSHREE

M&L Epoxy Polyurethane Coating (EPU) Supplying and applying ESD Ployurethane Flooring System as per the following Specification:- (a) Surface preparation: preparing the existing surface of floor by using proper scarification eqpt and cleaning by wire brushing & blow etc, to remove all dirt, dust, oil etc to expose clean sound base concrete. Cost shall include any imperfections in the concrete shall be treated with suitable repair system as per manufacturer specification. Note:- (i) Material /Chemicals required for repairing crack, potholes and damaged areas shall be paid separately at supply only rates. (ii) Treatment of construction and expansion joints including filling as per manufacturer's specification and direction of Engineer-in-Charge, which shall be paid separately. (b) Primer: Supply and application of moisture insenstive solvent free epoxy bonding primer over the prepared surface (Floor/coving) in a thin continuous film and work the Primer into the surface using a stiff brush or roller. Apply second priming coat on identified light colored dry patches over first coat.

(c) Base Coat/Scratch Coat : Supply and application of 1mm thick base layer with cementitious Polyurethane of self smoothing self levelling epoxy underlay spread evenly to maintain the thickness using a serrated trowel followed by spike roller, rolled over the levelled underlay to remove any entrapped air all as per manufacturer instructions and as specified. (d) Anti Static grid : Supply and fix copper earth strip of size 25mm wide and 80 micron thick, fixed over the floor area along the perimeter and internally with a grid size of min 3mx 3m and max 5m between strips. The Surface shall be treated with aqueous anti static epoxy system, conductive under coat spread as specified and as manufacturer's instructions. The conductivity of the under coat shall be 2 x10^3 ohms - 4x 10^3 ohms. The entire system to be connected to earth pit AND testing complete. (e) Epoxy Polyurethane Coating (EPU): Providing 3 mm thick epoxy polyurethene ESD flooring, having 28 days compressive strenght as per ASTM C 109 45MPa, Flexural strenght will be 12 MPa as per BS 6319-3, Tensile strength will be 4MPa as per BS 6319-7, having surface of earth resistance < 1 x 160 Ohms. The fire resistivity of the material has to be of class 2 as per BS 476-7. Make:- FOSROC / SIKA/ STP / CHOKSEY/ASIAN/ TIKITAR / DANOSA

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light/Fan point controlled by one switch.

All as per Item No- 155 but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No- 155 but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No- 155 but One bell point controlled by one switch

One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

One light/fan point controlled by one by one way switch.

ditto- as above item No16 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

ditto- as above item No16 (c) but Same board.

-ditto- as above one power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

Supply and fix switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix Bell push button 5 Amp, flush type complete all as specified .

Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix Modular type switch, 1 way,10 Amps, 1 module Make - Precision

Supply and fix Modular type socket, 2/ 3 pin combined, 6 Amps, 2 module Make - Precision

Supply and fix Modular type switch, 1 way, 16 Amps, 1 module Make - Precision

Supply and fix Modular type socket, 6/16A 3 pin, combined, 2 module Make - Precision

Supply and fix Modular type fan regulator step type 120 W 2 module Make - Precision

M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&F electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

S & F lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S & F LED Tube rod light double side connection T-8, 18 watt Suitable for 4 feet long frame all as specified and directed.

S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 36 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

S&F ceiling mounted 2x2 LED luminaire Pluto neo panel with glare free soft light 34 Watt complete pre-wired all as specified and directed.

S&F Surface mounted Comet square shaped/ round LED luminaire die cast body with premium diffucer (Comet squre/ round)with glare free soft light 12 Watt complete pre-wired all as specified and as directed.

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed. .

Supply and fix in repair MCB SPN 40 to 63 Amps, 240 volts complete all as specified and as directed.

Supply and fix in repair MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 186 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 186 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

Supplying and Fixing/connecting for service connection/ Garden light connection, 1100 volts weather proof flat twin core Cable PVC insulated aluminium multy sranded conductor of sizes 4 Sqmm 2 Core Complete all as Specified and Directed.

----Ditto---- above item no-58 but sizes 6 Sqmm 2 Core.

Note: Amount of sch of credit of Rs.65522/-will be deducted from total amount of BOQ.

M/s M R MAHANA (BID ID -3367103)

Vinod Enterprises (BID ID -3367078)

Alpha Construction (BID ID -3367066)

M/S SAMEER SUBHASH PATANI (BID ID -3367032)

MANOVANDANA CONSTRUCTION (BID ID -3375770)

JEET CONSTRUCTIONS CO. (BID ID -3366851)

J Sams Contructions (BID ID -3367653)