Shifting of Distribution Transformer at Kotilinga Nagar Main road Ward No52

Shifting of Distribution Transformer at Kotilinga Nagar Main road Ward No52

30.02 12 Way LT Feeder Piller Box (MS & Thermoset Plastic) with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1 and 2

Dwg No. BESCOM/GM/Q...

9.06 12 Ways (Thermoset Plastic Enclosure) LT Feeder piller box (MS & Thermoset Plastic Enclosure) including termination, wiring & connection of cables12 Ways (Thermoset Plastic Enclosure) LT Feeder p...

Spun Pole Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991

1.5.1 Ordinary Soil Digging of Pit for Spun Pole Digging of Pit 2.5 Mtr depth for erection of 11 Mtr long Tubular Spun Pole as per approved Drawing.

Erection Of Spun Pole Erection of 11 Mtr long Concrete Spun Pole in a pit of 2.5 Mtr depth (Mechnised Labour)

2.04 Single Pole Mounted Transformer (SPMT)

Kit for erection of Transformer on 11 Mtr

Spun Pole as per IS-1977 Three H Frame with Transformer Seating andSeating angle support cross arm for 11 Mtr Spun...

4.04 Erection of Single Pole Mounted Transformer

Structure For Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable)...

Fixing of HT/LT Single Top Support

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

Rabbit ACSR Conductor

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Stringing of Conductor do - for Rabbit ACSR

Alkathine Tube Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr

A) Base concreting For 11 M Spun Pole (1000x1000x150 mm)

B) Pole concreting For 11 M Spun Pole (1000x1000x2500 mm)

C) Coping for Poles 390 mm all around the pole for an height of 300 mm for Spun Pole(1130x1130x300 mm)

(3.251 mm Dia), Std Wt: 82 Kg/KM

7/10 SWG GI Wire

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

5.10 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

5.09 Guy Clamp - MS

1.7.1 Ordinary Soil Digging of Pit for GUY SET

GI Pipe Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, ...

11 kV, HG Fuse Unit with Solid Core Insulator

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring

GOS 11 kV, 200 Amps Single Break GOS

(Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

fixing GOS Fixing of GOS including wiring (11 kV Single Break 200 Amps)

Grounding Material

Pipe Grounding GI grounding Pipe,B-class,42mm dia,2.5mtr long 3.2mm thick with bolt,nut,GI strips and washer compleete.Minimum weight of GI pipe:7.3kg

Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each

Salt Good Quality salt for grounding purposes packed in 50kg gunny bag.

Digging Digging of pit for providing GI Pipe type Earthing.

1) Aluminium Wires PVC Wire

PVC Wire - 120 Sqmm

Al Wt: 32 Kg, Total Wt: 45.5Kg/100 Mtr Coil

3) PG Clamp Rabbit to Insulated Wire 120 Sqmm

(Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018)

5) MS Fish Plate

Lightning Arrester 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

Fixing Lightning Arrester Lightning Arrester, Metal oxide,10 kV, 5 kA Polymeric Type with ground disconnector

Caution/Danger Board

Fixing Caution/Danger Board

Anticlimbing Device GI Barbed wire (12 Mtr/Kg) wire Lumpsum

Fixing Charges Anticlimbing Device GI Barbed wire (12 Mtr/Kg)

LT UG Cable 1.1 kV, XLPE or Heat resistant PVC

insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per I...

Laying of LT cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 120 to 240 Sqmm

HT UG Cable 36.01) 95 Sqmm, (54 GI Wires - 2.5 mm Dia) 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivi...

3Core 95 to 150 Sqmm Laying of HT cable Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff

35.04 3.5 x 225/240/300 Sqmm LT (Pothead) Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

22.15 120 to 240 Sqmm Fixing LT Pothead Heat shrinkable Type Termination

45.07 3x95 Sqmm HT Pothead Heat Shrinkable Outdoor Type Cable

Termination Kit for XLPE Cable

22.04) 3x95 to 3x150 Sqmm Fixing HT Pothead Heat shrinkable Type Terminations

45.16 3x95 Sqmm HT Joint Kit Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule

22.01 3x95 to 3x150 Sqmm Heat shrinkable Straight Through Joint Cable Joint and Termination wiring (for HT & LT UG

Ug Cable Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, b...

66.05) HDPE/PLB Pipe 40/33 mm Optical Fibre Cable (OFC) and its Accessories

Releasing RCC/PSC Pole 9 Mtrs, 8 Mtrs Dismanting of Steel/I- Beam 90% of the Pole erection charges (2.02 + 1.1.1)

Releasing of 2/4 Pin cross arm with Insulator and Braces fixing

Releasing Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/ Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, ...

Releasing 9 Mtrs RCC Transformer Structure DP 4.02 For Erection of Three Pole Mounted Transformer Structure Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun P...