REPLACEMENT OF DAMAGED FALSE CEILING IN WEST GATE FACILITIES CENTER TAJ MAHAL, AGRA

Amount

Demolishing cement concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of material within 50 meter lead as per direction of Engineer - in - charge. (Rate Including GST)

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. (Rate Including GST)

Providing Mild steel and Medium Tensile steel bars reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. upto plinth level. (Rate Including GST)

Providing and laying in position cement concrete 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level. (Rate Including GST)

Steel work of Hot finished welded type tubes in built up tubular (round, square or rectangular hollow tubes etc.) mtrusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Rate Including GST)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including GST)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate Including GST)

Providing and fixing 4 mm thick ACP sheet over M.S. iron hollow pipe frame with screw including cutting for fan clamp and ceiling light where required and taking out damaged old false ceiling. (Rate Including GST)

Taking out false ceiling light and ceiling fan during replacement of false ceiling and refixing after complete the work including providing switch 6 amp. with board of reputated brand for each light and fan including provide necessary required materials. (Rate Including GST)

Lock 7 Liver (Link Brand). (Rate Including GST)

Lock 6 Liver (Link Brand). (Rate Including GST)

DHAKREY BROTHERS

AMBIKA FURNITURE AND DECORATORS