Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹34.9 LAccepted-Finance 0 ARANG KHAKORA ROAD ARANG KHAKORA ROAD ARANG RAIPUR CHHATTISGARH 493441 | RAIPUR | CHHATTISGARH | 493441 | L-1 | Accepted-Finance Rate Quoted by the bidder are the lowest, hence ranked L-1. | |
| 2 | L-2₹34.9 L−₹3,556.96 (0.10%)Accepted-Finance VILL DRABAD PO MANJEER TEHSIL SALOONI DISTT CHAMBA H P 176312 | CHAMBA | HIMACHAL PRADESH | 176312 | L-2 | Accepted-Finance Rate Quoted by the bidder are higher than the L1 firm, hence ranked L-2. | |
| 3 | Rejected-Technical | - | Rejected-Technical As the firm failed to submit offline documents i.e. original EMD by due date as per NIT, hence Disqualify for next stage. |
| Sl No | Description | Qty | Unit | RAKESH KUMAR L1 | meera enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | SITC of hot dipped galvanised 12 mtr height pole suitable for wind velocity as per IS 875 part 3, it shall also include accessories for high mast including head frame, steel wire rope 5 mm dia, trailing cable, double drum winch, galvanized lantern carriage arrangement (min. 1.0 HP motor) suitable for 8 lumlnaires symmetrically. The mast shall have provision for mounting integral power tool at the base compartment for its operation. . The pole shall also be provided with hinged /chained flush door of approx 1000 mm lengths at an elevation of 1m from the base plate with proper strengthening to the cutout of the door opening. Each pole shall be complete with a Bakelite sheet complete (i/c fixing on top of pole with required accessories complete) for light fitting, 6-16 amps, 10 kA SP MCB, Screwless DIN mounting Connectors suitable for upto 16 sq.mm. Terminations complete with DIN bar, shorting links, end locks etc as required (Wago / Pheonix make) and 5x 4.0 sqmm FRLS PVC insulated copper conductor single core cable from junction box to the luminaire and control panel box complete etc as required. The pole shall be with suitable size of GI base plate, 600-750 mm long 'J' type GI foundation bolts (6 nos.) of min. 24mm dia each with three GI nuts and two GI washers (EN.8 grade) (for each J bolt) etc.complete as per Specifications/drawing. The pole shall have a minimum OAF of 350mm at bottom and 140 mm at top. The pole sheet shall have a minimum section thicknessof 4 mm. The pole shall be fabricated in two section and shall be provided with necessary anchor plate and template as per specifications. (MakeNezone/Utkarsh/Valmont/Bajaj/ Wipro/N.P.C/Jindal or equivalent) | 5 | each | 72,000 ₹3,60,000 Lowest | 1,35,000 ₹6,75,000 |
| 2.00 | Supplying & Installation of LED floodlight made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/125LPW 10KV SPD included. LED floodlight luminrate type (Make crompton : LFLN-200 W/60-M or equivalent) | 40 | nos | 7,000 ₹2,80,000 Lowest | 23,800 ₹9,52,000 |
| 3.00 | Supplying & Installation of twin dome aviation obstruction LED lights having the intensity equvilant to @3300/3300/1700 lux per each lamp (7- 10W LED). | 6 | nos | 5,000 ₹30,000 Lowest | 5,260 ₹31,560 |
| 4.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil | 72.69 | cum | 400 ₹29,076 | 205 ₹14,901.45 Lowest |
| 5.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 4.02 | cum | 8,000 ₹32,160 | 6,523 ₹26,222.46 Lowest |
| 6.00 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns | 66.31 | sqm | 700 ₹46,417 | 307 ₹20,357.17 Lowest |
| 7.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 21.08 | cum | 11,000 ₹2,31,880 | 7,636 ₹1,60,966.88 Lowest |
| 8.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 1,090 | kg | 98 ₹1,06,820 | 90 ₹98,100 Lowest |
| 9.00 | SITC of control panel ousing suitable control curcuit for automatic switching ON and OFF of the mast. It shall also have suitable controls for operation of Power Tool as per site requirement. | 5 | each | 7,500 ₹37,500 Lowest | 23,000 ₹1,15,000 |
| 10.00 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe
of 2.7 metre long etc. with charcoal/ coke and salt as required. | 7 | set | 20,000 ₹1,40,000 | 13,850 ₹96,950 Lowest |
Tender Value
₹36.6 L
EMD Value
₹1.1 L
Closing Date
5 Nov 2025, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commandant (Engineer)
CONTRACT CELL, CENTRAL ZONE HQR, CRPF, STREET NO. 299, DJ BLOCK, NEW TOWN AREA-III, NEAR JALVAYU TOWER, NEW TOWN, KOLKATA (W.B.) PIN-700160
Providing and installation testing and commissioning of 30 meter and 12 meter high mast light with pole
2025_CRPF_883440_1
B.V(GC Siliguri) Spl. Repair/2025-26-CZ-C/Cell (NIT-74)
Open Tender
Civil Works - Buildings
Item Rate
90 days
GC, CRPF, Kawakhali, Siliguri (WB)
As per tender enquiry
13 documents required · 13 mandatory
₹0
₹1.1 L
27 Nov 2025
30 Oct 2025
6 Nov 2025
30 Oct 2025
5 Nov 2025
30 Oct 2025
Amount
SITC of hot dipped galvanised 12 mtr height pole suitable for wind velocity as per IS 875 part 3, it shall also include accessories for high mast including head frame, steel wire rope 5 mm dia, trailing cable, double drum winch, galvanized lantern carriage arrangement (min. 1.0 HP motor) suitable for 8 lumlnaires symmetrically. The mast shall have provision for mounting integral power tool at the base compartment for its operation. . The pole shall also be provided with hinged /chained flush door of approx 1000 mm lengths at an elevation of 1m from the base plate with proper strengthening to the cutout of the door opening. Each pole shall be complete with a Bakelite sheet complete (i/c fixing on top of pole with required accessories complete) for light fitting, 6-16 amps, 10 kA SP MCB, Screwless DIN mounting Connectors suitable for upto 16 sq.mm. Terminations complete with DIN bar, shorting links, end locks etc as required (Wago / Pheonix make) and 5x 4.0 sqmm FRLS PVC insulated copper conductor single core cable from junction box to the luminaire and control panel box complete etc as required. The pole shall be with suitable size of GI base plate, 600-750 mm long 'J' type GI foundation bolts (6 nos.) of min. 24mm dia each with three GI nuts and two GI washers (EN.8 grade) (for each J bolt) etc.complete as per Specifications/drawing. The pole shall have a minimum OAF of 350mm at bottom and 140 mm at top. The pole sheet shall have a minimum section thicknessof 4 mm. The pole shall be fabricated in two section and shall be provided with necessary anchor plate and template as per specifications. (MakeNezone/Utkarsh/Valmont/Bajaj/ Wipro/N.P.C/Jindal or equivalent)
Supplying & Installation of LED floodlight made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/125LPW 10KV SPD included. LED floodlight luminrate type (Make crompton : LFLN-200 W/60-M or equivalent)
Supplying & Installation of twin dome aviation obstruction LED lights having the intensity equvilant to @3300/3300/1700 lux per each lamp (7- 10W LED).
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
SITC of control panel ousing suitable control curcuit for automatic switching ON and OFF of the mast. It shall also have suitable controls for operation of Power Tool as per site requirement.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3CX35 sqmm size Aluminium Armoured LT Cable in the existing RCC/ HUME/ METAL/HDPE pipe as required. 35 sq. mm
Supplying and laying of following size of DWC HDPE pipe ISI marked along with all accessories like socket bend coupler etc. conforming to IS 14930,Part II complete with fitting and cutting jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective etc. complete as required. (Makes Gemini/Duraline/Rex). 63 mm dia (OD-63 mm & ID-51 mm nominal)
SITC of hot dipped galvanised 30 mtr height pole suitable for wind velocity as per IS 875 part 3, it shall also include accessories for high mast including head frame, steel wire rope 6 mm dia, trailing cable, double drum winch, galvanized lantern carriage arrangement suitable for 16 lumlnaires symmetrically. The mast shall have provision for mounting integral power tool at the base compartment for its operation. The pole shall also be provided with hinged /chained flush door of approx 1200 mm lengths at an elevation of 1m from the base plate with proper strengthening to the cutout of the door opening. Each pole shall be complete with a Bakelite sheet complete (i/c fixing on top of pole with required accessories complete) for light fitting, 6-16 amps, 10 kA SP MCB, Screwless DIN mounting Connectors suitable for upto 16 sq.mm. Terminations complete with DIN bar, shorting links, end locks etc as required (Wago / Pheonix make) and 5 x 4.0 sqmm FRLS PVC insulated copper conductor single core cable from junction box to the luminaire complete etc as required. The pole shall be with suitable size of GI base plate, 700-750mm long 'J' type GI foundation bolts (16 nos.) of min. 24mm dia each with three GI nuts and two GI washers (EN.8 grade) (for each J bolt) etc.complete as per specifications/drawing. The pole shall have a minimum OAF of 800mm at bottom and 150 mm at top. The pole sheet shall have a minimum section thicknessof 4 mm. The pole shall be fabricated in three section and shall be provided with necessary anchor plate and template as per specifications. MakeNezone/Utkarsh/Valmont/Bajaj/ Wipro/N.P.C/Jindal or equivalent)
Supplying & Installation of LED floodlight made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. Available in MB/WB angles. System efficacy ≥ 110/125/135 LPW. 10KV SPD included. LED floodlight luminrate type (Make crompton : CFS-501-350-57-30D-HL2-GL-NBK 350W or equivalent)
meera enterprises (BID ID -3311608)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
BOQ_928553.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .