Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LQualified GURDWARA LINE SHOWROOM NO 6 DESHMESH MARKET SRI VIJAYA PURAM 744101 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L1 | Qualified MSE, MII, Category: General | |
| 2 | L2₹27.6 L+₹53,180 (1.96%)Qualified C O SRG TRADERS C O SRG TRADERS PHOENIX BAY PHOENIX BAY SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L2 | Qualified MSE, MII, Category: General | |
| 3 | L3₹29.3 L+₹2.2 L (8.25%)Qualified NEW PAHARGAON NEAR MUNICIPAL OFFICE GARACHARMA PO SRI VIJAYA PURAM 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L3 | Qualified MSE, MII, Category: General | |
| 4 | L4₹30.2 L+₹3.1 L (11.3%)Qualified | L4 | Qualified MII | |
| 5 | L5₹32.7 L+₹5.6 L (20.5%)Qualified D 5 58 GALI NO 5 DAYALPUR NORTH EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L5 | Qualified MSE, MII, Category: General |
Tender Value
₹25.6 L
EMD Value
₹80,000
Closing Date
18 Nov 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Minniebay
7033609
GEM/2024/B/5514847
Two Packet Bid
Almirah Large with shelves steel,Almirah med with shelves steel,Bed Hard 6feetx3feet with hard ply
45 days
Andaman And Nicobar Islands; South Andamans
Total value wise evaluation
BOQ
6 documents required · 6 mandatory
3 yrs
₹3
50%
₹80,000
18 Nov 2024
28 Oct 2024
18 Nov 2024
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Almirah Large with shelves steel | Almirah Large with shelves steel
DIMENSION. Overall size shall be 1985mm high,920mm wide and 485mm deep.
DESCRIPTION. The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments. Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. HANDLE. One chromium plated steel handle with a locking device shall be provided as shown on drawing . LOCKING DEVICE.The locking device shall be three way locking device and shall also be provided with decorative key plate. FINISH. All steel surfaces shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine over a coat of red oxide primerafter preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine. Rest all as per drg. | 8 | Nos | South Andaman | 45 |
| 2 | Almirah med with shelves steel | Almirah med with shelves steel.
DIMENSION. Overall size shall be 1270mm high,765mm wide and 440mm deep.
DESCRIPTION. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship
HANDLE. A steel chromium plated handle 100mm long shall be provided to the shutter.
LOCKING DEVICE. The locking device shall be three way locking device and shall also be provided with decorative key plate .
FINISH. All steel surfaces exposed to view when placed in position shall be painted with two coats of silver hammer paint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visible colour as directed by Engr In Charge. Rest all as per drgs | 7 | Nos | South Andaman | 45 |
| 3 | Bed Hard 6feetx3feet with hard ply top | Bed Hard 6feetx3feet with hard ply top.
Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board or foot board..25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.All metal or iron work shall be treated with synthetic enamel black after doing two coats of metal primer.Rest all as per drg. | 20 | Nos | South Andaman | 45 |
| 4 | Bath Stool PVC | Bath Stool PVC
Shall be made up of 5mm thick PPCP material. The size of the bath mat shall be 400mm Lx300mm Wx250mm. The bath mat shall have centre leg of dia 25mm. The four legs shall be in arc shape and of size 10mmx100mm. The top of the bath mat shall have 3mmx1mm thick stiffener moulded along with the seat in single piece underneath. The weight of the bath mat shall not be less than 1.3 kgs. | 13 | Nos | South Andaman | 45 |
| 5 | Charpoy IP Hard | Charpoy IP Hard top
Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg..PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg | 17 | Nos | South Andaman | 45 |
| 6 | Chair Dinning | Chair Dinning. Chair Dining with Seat cushioned shall be made to the shape size and design as shown on drg and as specified in particular specification and shall be manufactured in accordance with relevant IS. i. Timber. All wood work shall be of kiln seasoned and chemically pressure treated Ist class hard wood Teakwood. ii. Seat. Seat shall be 75mm thick of polyurethane foam density of 32 Kg per Cu m covered with fabric of acrylic or polyester or polypropylene and upholstered with good quality leatherised of make Sleep well or Kurl on or Coir foam as approved by GE. Plywood for seat shall be 12mm thick melamine faced pre laminated particle board bonded with phenol formaldehyde as per IS 3087 1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 4mm thick teak wood edging and shall be fixed as specified and directed. iii. Toes. Nylon buffers shall be of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. iv. Finishes. All wooden surfaces exposed to view. except under sides of frame and bottom of legs shall be French polished. v. All other items or fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms or pattern. | 84 | Nos | South Andaman | 45 |
| 7 | Chair Writing | Chair Writing
The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications are as per drg and directed by Engr-In-Charge | 35 | Nos | South Andaman | 45 |
| 8 | Chair Verandah | CHAIRVERANDAH. All as shown or drawing. The legs on both sides of chair shall be of 20mmm dia mild steel conduit of well thickness as 1.6mm made to shape as shown on drawing. The width at bottom of legs in sides shall be 600mm at at seat portion the width shall be 405mm. The frame of legs shall be joined in front with 10mm dia mild steel rod welded to legs at 75mm below the bottom of front portion of seat. The frame of legs shall be in one piece. The seat and back rest shall be made of one piece. The width of seat between the legs shall be 460mm. The top of back rest shall be 760mm from bottom of legs. The front of seat shall be at 35mm high and back of seat shall be 300mm high from bottom of legs. Two horizontals of 20mm dia mild steel tube of wall thickness as 1.6mm shall be provided one at the rear of seat and other at bottom of back rest over which nylon cane shall be woven as shown on drawing. 3mm thick flat iron plate shall be welded at the bottom of all legs. in mat pattern or as directed by Engineer-in-charge in the seat, back and hand rest portion. PVC/hard rubber toes shall be provided to the bottom of all legs. All steel surfaces exposed to views when placed in position shall be painted with two coats of enamel paint over a coat of primer after preparation of surfaces as directed by Engineer-in-charge. Painting shall be done with spray machine. Caning shall be done after the painting of chair. | 22 | Nos | South Andaman | 45 |
| 9 | Locker bed side steel | Locker bed side steel
DIMENSION. Overall size shall be 760mm long, 600mm wide and 1100mm high.
DESCRIPTION. The locker shall be made of mild steel sheet 1mm thick.20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets. Two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting . One hasp and staple 75mm long shall also be fixed to shutters with riveting.The left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also.The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet.
FINISH. All steel surface internally and externally, exposed to view when placed in position shall be given two coats of green hammer paint internally and externally after properly smoothened the surface with sand paper and applying putty.A Mark of MES shall also be provided at top left corner of front shutter of visible colour. Painting shall be done with spray machine. Rest all specifications are as per drg . | 41 | Nos | South Andaman | 45 |
| 10 | Peg table | Peg table
DIMENSION. Overall size shall be 450mm long,300mm wide and 380mm high.
DESCRIPTION. Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table.
FINISH. All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg. | 13 | Nos | South Andaman | 45 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7033609.pdf
GEM_BID
boq_item_sample_file_2024-10-17-14-48-14_d2dcf9113a2137a7af31ecc239f3292f.pdf
BOQ
boq_item_sample_file_2024-10-17-14-48-14_1859220b039023f06fc7b65973d2f71b.csv
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .