REPAIR AND PAINTING TO MISC STEEL FURNITURE ITEMS INCLUDING

Amount

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)

S&F 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw the other with washer , including removal of old unserviceable ply top.complete all as per specified and directed by Engr-in-charge.

M&L for dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends complete all as specified and directed .

M&L for dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 1.01 to the required size for short rail including threading at both ends complete all as specified and directed .

Removing of Old u/s legs of Charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 1.03 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end as directed by Engr - in - Charge.

Supply and fixing MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit.

Supply and fixing flat MS iron 02 Nos of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts, bolts and washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, Complete all as directed by the Engineer - in- Charge. Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit.

M&L for dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32 mm bore pipe complete all as specified and directed .

S&F in replacement of unserviceable check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy of approved make complete all as specified and directed .

REPAIR TO LOCKER BED SIDE STEEL FD-1029/563/(71) :

M&L for dismantling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable MS screws of approved quality complete all as specified and directed by Engr-in-charge.

M&L for dismantling of existing unserviceable Hasp and Stapple and S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed by Engr-in-charge.

M&L for dismantling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing colour over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding as per drg and as directed by the Engr-in-Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves and scraping of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed by Engr-in-Charge.

REPAIR TO ALMIRAH MED STEEL FD-1032/87M :

Dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding and as directed by the Engr-in-Charge..

S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S&F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg or as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints, filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved colour (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES FD-1031 :

Dismantling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing colour over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding and as directed by the Engr-in-Charge.

S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drg.

Dismantling of unserviceable bushes of locking assembly and S&F new MS bushes of locking assembly as directed by Engr-in Charge.

Dismantling of unserviceable locking asembly with complete mechanism and S&F new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg and as directed by Engr-in Charge.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints, filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved colour (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

REPAIR TO ALMIRAH LARGE STEEL 1/2H, 1/2 S (FD/E6/MAP/18)/FD -1033 :

S&F stainless Steel hanging rod of size 25 mm, 1 mm thick to Almirah Steel of approved quality as specified and shown in drg.

Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints, filling, finishing and painting of Almirah Medium steel with two coats of synthetic enamel paint in dual shade of approved colour (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed by Engr-in-Charge.

M&L for dismantling of existing unserviceable MS Butt Hinges & S&F new SS Butt Hinges with suitable screws as per specification and as per drg. 75 mm long high quality of approved pattern complete for Items Sr No 2.00,3.00 &4.00all as specified and directed by Engr-in-charge.

Dismantling of existing unserviceable CP handles and S&F new CP handles of approved quality in Godrej Pattern for Items Sr No 3.00,4.00 &5.00 as specified and as directed by Engr-in-Charge.

Dismantling of unserviceable locks of Almirah Med/Large with shelves/Large 1/2Hx1/2S and S&F new locks of approved brand as specified and shown in drg.

S&F MS cleats made of 2 mm thick MS Steel made to shape and fix in the Almirah to support the shelves for Items Sr No 3.00&4.00 complete all as directed

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) :

REPAIR TO BED HARD PLY TOP STEEL (FD/E6/MAP/08(R) : S&F in replacement of unserviceable top of bed hard steel to be made of 12 mm thick (7Ply) commercial plywood BWR grade, to be fixed with appropriate sizes of MS nuts, bolts and washers without having any joints. make : Kit Ply/Green Ply shape and size as per drg and as directed by Engr-in-Charge.

REPAIR TO HEAD BOARD : Removing of unserviceable Head board and S&F new Head board made of 18 mm thick Ext grade MDF board of approved shade (Make : Action Tesa/Novapan/Ecoboard) with 4mm thick seasoned teakwood beading all round with suitable screws with the cleatsas specified on drg complete all as directed by Engineer-in-Charge.

REPAIR TO FOOT BOARD : Removing of unserviceable Foot board and S&F new Foot board to be made of 18 mm thick Ext grade MDF board of approved shade (Make : Action Tesa/Novapan/Ecoboard) with 4mm thick seasoned teakwood beading all round with suitable screws with the cleats as specified on drg complete all as directed by Engineer-in-Charge.

M&L for scraping of existing coat of paints filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge.

REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :

S&F in replacement of unserviceable top of bed newar/plytop to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, without having any joints, Make of ply Kit Ply/Green ply/Century shape and size, as per drg and directed by Engr-in-charge.

S&F in replacement of unserviceable long rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg or as directed by Engr-in-Charge.

S&F in replacement of unserviceable short rail shall be First class class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as specified on drg and as directed by Engr-in-Charge.

HEAD REST : Unserviceable outer ply to be replaced by 3 mm thick ply wood one side teak faced and inner side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg and as directed by Engr-In-Cahrge.

FOOT REST : All as per Srl Item No. 11.04 above but foot rest.

HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS screws and as per drg and as directed by Engr-in-Charge

FOOT REST : Dismantling of unserviceable Foot rest of Bed ply top, S&F new foot rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS secres and as per drg and as directed by Engr-in-Charge

S&F of MS corner bracket in right angled shape of size 4"x4", 6 mm thick with four holes duly painted with black enamel paint after applying the one coat of red oxide be fixed with suitable MS screws to the bed as directed by the Engr-in-Charge.

French polishing on old wood surfaces including preparation of old surfaces by mild grinding all as specified and filling of cracks with putty. (a) Wood based surfacce direct to vision with glossy shining when placed in position. (b) Color of polish will be as per user requirement or as approved by Engr-in-Charge.

REPAIR TO TABLE 900MMX600MMX760MM STEEL WITH & WITHOUT DRAWER FD-1007/1008 :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F New drawers with appropriate size of sheet as existing, as per drg and as directed by Engr-in-Charge.

Removing of existing coat of paint from steel parts by scraping, filling and repainting after removing the unserviceable PVC shoes, with two coats synthetic enamel paint of approved shade using spray after giving a primer coat of red oxide. (Make: Berger/ Asian Paint) as directed by Engr-in-Charge

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO TABLE 900MMX900MMX760MM STEEL FD-1009 :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

Removing of existing coat of paint from steel parts by scraping, filling and repainting after removing the unserviceable PVC shoes, with two coats synthetic enamel paint of approved shade using spray gun after giving a primer coat of red oxide. (Make: Berger/ Asian Paint) of as directed by Engr-in-Charge

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO TABLE OFFICE CLERK STEEL FD-381 :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F New drawers with appropriate size , with locking device as per drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size as per existing drg and as directed by Engr-in-Charge.

Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) using spray after giving a primer coat with red oxide as per specification and as shown on drg and directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO TABLE OFFICE OFFICER STEEL FD-1002 :

Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

S&F New drawers of appropriate size as per existing item, with locking device as per drg and as directed by Engr-in-Charge.

S&F New drawers with appropriate size of sheet as existing, as per drg and as directed by Engr-in-Charge.

Dismantling of existing unserviceable Shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drg and as directed by Engr-in-Charge.

Denting/bending/rewelding Repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per speciaification and as shown on drg and directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge.

REPAIR TO CHAIR VERANDAH (FD-256) :

Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane of 4.00 mm wide half round cane.

M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L for painting of chair steel frame with two coat of synthethic enamel paint of white shade Make : Berger/Asian paints after removing the rubber shoes and complete removal of existing coat of paint , including preparation of old surface by mild grinding, applying a primer coat with red oxide all as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg and as directed by the Engr-in-Charge.

TEAPOY VERANDAH. (FD- 255) :

TEAPOY VERANDAH. (FD- 255) : Removing of unserviceable top of table in any positon, S&F new top made out of 18/19 mm thick Ext grade MDF prelaminated board of approved shade Make : Ecoboard/Action Tesa/Novapan (ISI Marked) duly post-formed including gas welding of loose joints of existing frame before fixing the top. shape and size all as specified on drg and as directed by Engr -in-Charge.

M&L with gas welding to broken components of steel frame so as to bring the whole unit in serviceable condition, welding portion should be smoothed by grinder as directed by Engr-in-Charge.

M&L for painting of Teapoy Verandah steel frame with two coat of synthethic enamel paint of white shade of Make : Berger/Asian paints after removing the rubber shoesand complete removal of existing paint including preparation of old surface by mild grinding, applying a primer coat with red oxide all as directed by Engr-in-Charge.

S&F new PVC hard Rubber Shoes as per drg or as directed by the Engr-in-Charge.

REPAIR TO RACK ADJUTABLE ENCLOUSER TYPE (FD-1035) : Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filling, finishing and painting of Rack steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

REPAIR TO RACK ADJUTABLE 6/7 SHELVES TYPE (FD-1038) : Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filling, finishing and painting of Rack steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide and as directed by Engr-in-Charge.

LADDER FOR LOFT MS (FD-238) : Scraping of rust, finishing and painting of ladder MS with two coats of synthetic enamel paint of black shade shade (Make: Berger/ Asian Paint) after giving a primer coat with red oxide and as directed by Engr-in-Charge. Note : The work is to be executed at BSO furniture yard SP Marg as well as at various Units locations and sites under the AOR of GE New Delhi, Delhi Cantt-10

M/S Shri Balaji Enterprises

SUNIL TRADERS